On 05/27/2015 06:10 PM, William Towle wrote:
> Fix rcar_vin_try_fmt to use the correct pad number when calling the
> subdev set_fmt. Previously pad number 0 was always used, resulting in
> EINVAL if the subdev cares about the pad number (e.g. ADV7612).
>
> Signed-off-by: William Towle <william.to...@codethink.co.uk>
> Reviewed-by: Rob Taylor <rob.tay...@codethink.co.uk>
> ---
> drivers/media/platform/soc_camera/rcar_vin.c | 36
> ++++++++++++++++++++++----
> 1 file changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/soc_camera/rcar_vin.c
> b/drivers/media/platform/soc_camera/rcar_vin.c
> index 0df3212..5523d04 100644
> --- a/drivers/media/platform/soc_camera/rcar_vin.c
> +++ b/drivers/media/platform/soc_camera/rcar_vin.c
> @@ -1702,7 +1702,7 @@ static int rcar_vin_try_fmt(struct soc_camera_device
> *icd,
> const struct soc_camera_format_xlate *xlate;
> struct v4l2_pix_format *pix = &f->fmt.pix;
> struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> - struct v4l2_subdev_pad_config pad_cfg;
> + struct v4l2_subdev_pad_config *pad_cfg = NULL;
> struct v4l2_subdev_format format = {
> .which = V4L2_SUBDEV_FORMAT_TRY,
> };
> @@ -1710,6 +1710,11 @@ static int rcar_vin_try_fmt(struct soc_camera_device
> *icd,
> __u32 pixfmt = pix->pixelformat;
> int width, height;
> int ret;
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + struct media_pad *remote_pad;
> +
> + pad_cfg = v4l2_subdev_alloc_pad_config(sd);
> +#endif
>
> xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
> if (!xlate) {
> @@ -1739,10 +1744,22 @@ static int rcar_vin_try_fmt(struct soc_camera_device
> *icd,
> mf->code = xlate->code;
> mf->colorspace = pix->colorspace;
>
> - ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd),
> - pad, set_fmt, &pad_cfg, &format);
> - if (ret < 0)
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + remote_pad = media_entity_remote_pad(
> + &icd->vdev->entity.pads[0]);
Can't you store this when you setup the link in soc_camera_probe_finish? Rather
then
looking it up every time?
Also, I think r-car should just depend on MEDIA_CONTROLLER, rather than adding
these
#ifdef's everywhere. But that's up to you.
Regards,
Hans
> + format.pad = remote_pad->index;
> +#endif
> +
> + ret = v4l2_device_call_until_err(sd->v4l2_dev,
> + soc_camera_grp_id(icd), pad,
> + set_fmt, pad_cfg,
> + &format);
> + if (ret < 0) {
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + v4l2_subdev_free_pad_config(pad_cfg);
> +#endif
> return ret;
> + }
>
> /* Adjust only if VIN cannot scale */
> if (pix->width > mf->width * 2)
> @@ -1764,13 +1781,19 @@ static int rcar_vin_try_fmt(struct soc_camera_device
> *icd,
> */
> mf->width = VIN_MAX_WIDTH;
> mf->height = VIN_MAX_HEIGHT;
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + format.pad = remote_pad->index;
> +#endif
> ret = v4l2_device_call_until_err(sd->v4l2_dev,
> soc_camera_grp_id(icd),
> - pad, set_fmt, &pad_cfg,
> + pad, set_fmt, pad_cfg,
> &format);
> if (ret < 0) {
> dev_err(icd->parent,
> "client try_fmt() = %d\n", ret);
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + v4l2_subdev_free_pad_config(pad_cfg);
> +#endif
> return ret;
> }
> }
> @@ -1781,6 +1804,9 @@ static int rcar_vin_try_fmt(struct soc_camera_device
> *icd,
> pix->height = height;
> }
>
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + v4l2_subdev_free_pad_config(pad_cfg);
> +#endif
> return ret;
> }
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
