On 26/05/15 16:04, David Howells wrote:
Provide a DVBv5 API signal strength. This is in units of 0.001 dBm rather
than a percentage.
From Antti Palosaari's testing with a signal generator, it appears that the
gain calculated according to Montage's specification if negated is a
reasonable representation of the signal strength of the generator.
To this end:
(1) Polled statistic gathering needed to be implemented in the TS2020 driver.
This is done in the ts2020_stat_work() function.
(2) The calculated gain is placed as the signal strength in the
dtv_property_cache associated with the front end with the scale set to
FE_SCALE_DECIBEL.
(3) The DVBv3 format signal strength then needed to be calculated from the
signal strength stored in the dtv_property_cache rather than accessing
the value when ts2020_read_signal_strength() is called.
Signed-off-by: David Howells <dhowe...@redhat.com>
---
drivers/media/dvb-frontends/ts2020.c | 62 +++++++++++++++++++++++++++++-----
1 file changed, 53 insertions(+), 9 deletions(-)
diff --git a/drivers/media/dvb-frontends/ts2020.c
b/drivers/media/dvb-frontends/ts2020.c
index 277e1cf..80ae039 100644
--- a/drivers/media/dvb-frontends/ts2020.c
+++ b/drivers/media/dvb-frontends/ts2020.c
@@ -32,10 +32,11 @@ struct ts2020_priv {
struct regmap_config regmap_config;
struct regmap *regmap;
struct dvb_frontend *fe;
+ struct delayed_work stat_work;
int (*get_agc_pwm)(struct dvb_frontend *fe, u8 *_agc_pwm);
/* i2c details */
- int i2c_address;
struct i2c_adapter *i2c;
+ int i2c_address;
u8 clk_out:2;
u8 clk_out_div:5;
u32 frequency_div; /* LO output divider switch frequency */
@@ -65,6 +66,7 @@ static int ts2020_release(struct dvb_frontend *fe)
static int ts2020_sleep(struct dvb_frontend *fe)
{
struct ts2020_priv *priv = fe->tuner_priv;
+ int ret;
u8 u8tmp;
if (priv->tuner == TS2020_M88TS2020)
@@ -72,11 +74,18 @@ static int ts2020_sleep(struct dvb_frontend *fe)
else
u8tmp = 0x00;
- return regmap_write(priv->regmap, u8tmp, 0x00);
+ ret = regmap_write(priv->regmap, u8tmp, 0x00);
+ if (ret < 0)
+ return ret;
+
+ /* stop statistics polling */
+ cancel_delayed_work_sync(&priv->stat_work);
+ return 0;
}
static int ts2020_init(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct ts2020_priv *priv = fe->tuner_priv;
int i;
u8 u8tmp;
@@ -138,6 +147,13 @@ static int ts2020_init(struct dvb_frontend *fe)
reg_vals[i].val);
}
+ /* Initialise v5 stats here */
+ c->strength.len = 1;
+ c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+ c->strength.stat[0].uvalue = 0;
+
+ /* Start statistics polling */
+ schedule_delayed_work(&priv->stat_work, 0);
return 0;
}
Hi David
Statistics polling can not be done by lmedm04 driver's implementation of
M88RS2000/TS2020 because I2C messages stop the devices demuxer.
So any polling must be a config option for this driver.
Regards
Malcolm
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
