Hi Hans,

Thanks for fixing the drivers!

On Sun, 3 May 2015, Hans Verkuil wrote:

> From: Hans Verkuil <hans.verk...@cisco.com>
> 
> Simplify imx074_set_fmt().
> 
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> Reported-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> ---
>  drivers/media/i2c/soc_camera/imx074.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/i2c/soc_camera/imx074.c 
> b/drivers/media/i2c/soc_camera/imx074.c
> index f68c235..4226f06 100644
> --- a/drivers/media/i2c/soc_camera/imx074.c
> +++ b/drivers/media/i2c/soc_camera/imx074.c
> @@ -171,8 +171,9 @@ static int imx074_set_fmt(struct v4l2_subdev *sd,
>               /* MIPI CSI could have changed the format, double-check */
>               if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
>                       return -EINVAL;
> -             mf->code        = imx074_colour_fmts[0].code;
> -             mf->colorspace  = imx074_colour_fmts[0].colorspace;
> +             fmt = imx074_colour_fmts;
> +             mf->code = fmt->code;
> +             mf->colorspace = fmt->colorspace;

Uhm, why this change? I understand, that this is equivalent code, but (1) 
is it at all related to the change? and (2) imx074_colour_fmts is an 
array, so, I'd prefer to keep it as is. I do use pointer arithmetics for 
array, but then I'd do something like

+               fmt = imx074_colour_fmts + 0;
+               mf->code = fmt->code;
+               mf->colorspace = fmt->colorspace;

which looks silly:) And then - even more importantly - you overwrite the 
fmt variable, which is then used below instead of calling 
imx074_find_datafmt() again. So, now you assign a (theoretically) 
different value to priv->fmt. I know that array only has one element and 
imx074_find_datafmt() will anyway just return it, but, I don't see why 
this change is needed?

Thanks
Guennadi

>       }
>  
>       mf->width       = IMX074_WIDTH;
> @@ -180,7 +181,7 @@ static int imx074_set_fmt(struct v4l2_subdev *sd,
>       mf->field       = V4L2_FIELD_NONE;
>  
>       if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> -             priv->fmt = imx074_find_datafmt(mf->code);
> +             priv->fmt = fmt;
>       else
>               cfg->try_fmt = *mf;
>  
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to