Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Simplify accordingly.
Moreover use the _optional variant which has tighter error checking, but
is simpler to use which allows further simplification.
Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
---
drivers/media/radio/si4713/si4713.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/media/radio/si4713/si4713.c
b/drivers/media/radio/si4713/si4713.c
index c90004dac170..e9d03ac69a27 100644
--- a/drivers/media/radio/si4713/si4713.c
+++ b/drivers/media/radio/si4713/si4713.c
@@ -383,7 +383,7 @@ static int si4713_powerup(struct si4713_device *sdev)
}
}
- if (!IS_ERR(sdev->gpio_reset)) {
+ if (sdev->gpio_reset) {
udelay(50);
gpiod_set_value(sdev->gpio_reset, 1);
}
@@ -407,8 +407,7 @@ static int si4713_powerup(struct si4713_device *sdev)
SI4713_STC_INT | SI4713_CTS);
return err;
}
- if (!IS_ERR(sdev->gpio_reset))
- gpiod_set_value(sdev->gpio_reset, 0);
+ gpiod_set_value(sdev->gpio_reset, 0);
if (sdev->vdd) {
@@ -447,7 +446,7 @@ static int si4713_powerdown(struct si4713_device *sdev)
v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
resp[0]);
v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
- if (!IS_ERR(sdev->gpio_reset))
+ if (sdev->gpio_reset)
gpiod_set_value(sdev->gpio_reset, 0);
if (sdev->vdd) {
@@ -1460,14 +1459,9 @@ static int si4713_probe(struct i2c_client *client,
goto exit;
}
- sdev->gpio_reset = devm_gpiod_get(&client->dev, "reset");
- if (!IS_ERR(sdev->gpio_reset)) {
- gpiod_direction_output(sdev->gpio_reset, 0);
- } else if (PTR_ERR(sdev->gpio_reset) == -ENOENT) {
- dev_dbg(&client->dev, "No reset GPIO assigned\n");
- } else if (PTR_ERR(sdev->gpio_reset) == -ENOSYS) {
- dev_dbg(&client->dev, "No reset GPIO support\n");
- } else {
+ sdev->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(sdev->gpio_reset)) {
rval = PTR_ERR(sdev->gpio_reset);
dev_err(&client->dev, "Failed to request gpio: %d\n", rval);
goto exit;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
