Hi!

> Nokia N900 is switching to device tree, make sure we can use flash
> there, too.
> 
> Signed-off-by: Pavel Machek <pa...@ucw.cz>

Sakari, you are marked as a matinainer for this driver. Can you take
the patch so that it makes it into 4.1?

Thanks,
                                                                Pavel

> diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c
> index 873fe19..0341009 100644
> --- a/drivers/media/i2c/adp1653.c
> +++ b/drivers/media/i2c/adp1653.c
> @@ -8,6 +8,7 @@
>   * Contributors:
>   *   Sakari Ailus <sakari.ai...@iki.fi>
>   *   Tuukka Toivonen <tuukka...@gmail.com>
> + *   Pavel Machek <pa...@ucw.cz>
>   *
>   * This program is free software; you can redistribute it and/or
>   * modify it under the terms of the GNU General Public License
> @@ -34,6 +35,8 @@
>  #include <linux/module.h>
>  #include <linux/i2c.h>
>  #include <linux/slab.h>
> +#include <linux/of_gpio.h>
> +#include <linux/gpio.h>
>  #include <media/adp1653.h>
>  #include <media/v4l2-device.h>
>  
> @@ -306,9 +309,17 @@ adp1653_init_device(struct adp1653_flash *flash)
>  static int
>  __adp1653_set_power(struct adp1653_flash *flash, int on)
>  {
> -     int ret;
> +     int ret = 0;
> +
> +     if (flash->platform_data->power) {
> +             ret = flash->platform_data->power(&flash->subdev, on);
> +     } else {
> +             gpio_set_value(flash->platform_data->power_gpio, on);
> +             if (on)
> +                     /* Some delay is apparently required. */
> +                     udelay(20);
> +     }
>  
> -     ret = flash->platform_data->power(&flash->subdev, on);
>       if (ret < 0)
>               return ret;
>  
> @@ -316,8 +327,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on)
>               return 0;
>  
>       ret = adp1653_init_device(flash);
> -     if (ret < 0)
> +     if (ret >= 0)
> +             return ret;
> +
> +     if (flash->platform_data->power)
>               flash->platform_data->power(&flash->subdev, 0);
> +     else
> +             gpio_set_value(flash->platform_data->power_gpio, 0);
>  
>       return ret;
>  }
> @@ -407,21 +423,77 @@ static int adp1653_resume(struct device *dev)
>  
>  #endif /* CONFIG_PM */
>  
> +static int adp1653_of_init(struct i2c_client *client,
> +                        struct adp1653_flash *flash,
> +                        struct device_node *node)
> +{
> +     u32 val;
> +     struct adp1653_platform_data *pd;
> +     enum of_gpio_flags flags;
> +     int gpio;
> +     struct device_node *child;
> +
> +     if (!node)
> +             return -EINVAL;
> +
> +     pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL);
> +     if (!pd)
> +             return -ENOMEM;
> +     flash->platform_data = pd;
> +
> +     child = of_get_child_by_name(node, "flash");
> +     if (!child)
> +             return -EINVAL;
> +     if (of_property_read_u32(child, "flash-timeout-microsec", &val))
> +             return -EINVAL;
> +
> +     pd->max_flash_timeout = val;
> +     if (of_property_read_u32(child, "flash-max-microamp", &val))
> +             return -EINVAL;
> +     pd->max_flash_intensity = val/1000;
> +
> +     if (of_property_read_u32(child, "max-microamp", &val))
> +             return -EINVAL;
> +     pd->max_torch_intensity = val/1000;
> +
> +     child = of_get_child_by_name(node, "indicator");
> +     if (!child)
> +             return -EINVAL;
> +     if (of_property_read_u32(child, "max-microamp", &val))
> +             return -EINVAL;
> +     pd->max_indicator_intensity = val;
> +
> +     if (!of_find_property(node, "gpios", NULL)) {
> +             dev_err(&client->dev, "No gpio node\n");
> +             return -EINVAL;
> +     }
> +
> +     pd->power_gpio = of_get_gpio_flags(node, 0, &flags);
> +     if (pd->power_gpio < 0) {
> +             dev_err(&client->dev, "Error getting GPIO\n");
> +             return -EINVAL;
> +     }
> +
> +     return 0;
> +}
> +
> +
>  static int adp1653_probe(struct i2c_client *client,
>                        const struct i2c_device_id *devid)
>  {
>       struct adp1653_flash *flash;
>       int ret;
>  
> -     /* we couldn't work without platform data */
> -     if (client->dev.platform_data == NULL)
> -             return -ENODEV;
> -
>       flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
>       if (flash == NULL)
>               return -ENOMEM;
>  
>       flash->platform_data = client->dev.platform_data;
> +     if (!flash->platform_data) {
> +             ret = adp1653_of_init(client, flash, client->dev.of_node);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       mutex_init(&flash->power_lock);
>  
> @@ -438,10 +510,10 @@ static int adp1653_probe(struct i2c_client *client,
>               goto free_and_quit;
>  
>       flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
> -
>       return 0;
>  
>  free_and_quit:
> +     dev_err(&client->dev, "adp1653: failed to register device\n");
>       v4l2_ctrl_handler_free(&flash->ctrls);
>       return ret;
>  }
> @@ -464,7 +536,7 @@ static const struct i2c_device_id adp1653_id_table[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
>  
> -static struct dev_pm_ops adp1653_pm_ops = {
> +static const struct dev_pm_ops adp1653_pm_ops = {
>       .suspend        = adp1653_suspend,
>       .resume         = adp1653_resume,
>  };
> diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt 
> b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
> new file mode 100644
> index 0000000..0fc28a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
> @@ -0,0 +1,37 @@
> +* Analog Devices ADP1653 flash LED driver
> +
> +Required Properties:
> +
> +  - compatible: Must contain be "adi,adp1653"
> +
> +  - reg: I2C slave address
> +
> +  - gpios: References to the GPIO that controls the power for the chip.
> +
> +There are two led outputs available - flash and indicator. One led is
> +represented by one child node, nodes need to be named "flash" and 
> "indicator".
> +
> +Required properties of the LED child node:
> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Required properties of the flash LED child node:
> +
> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Example:
> +
> +     adp1653: led-controller@30 {
> +             compatible = "adi,adp1653";
> +             reg = <0x30>;
> +             gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
> +
> +             flash {
> +                     flash-timeout-us = <500000>;
> +                     flash-max-microamp = <320000>;
> +                     max-microamp = <50000>;
> +             };
> +             indicator {
> +                     max-microamp = <17500>;
> +             };
> +     };
> 

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) 
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to