Hi Laurent,

On 11/26/2014 10:00 PM, Laurent Pinchart wrote:
> Hi Hans,
> 
> Thank you for the patch.
> 
> On Tuesday 18 November 2014 13:51:03 Hans Verkuil wrote:
>> From: Hans Verkuil <hans.verk...@cisco.com>
>>
>> Add support for importing dmabuf to videobuf2-dma-sg.
>>
>> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
>> Acked-by: Pawel Osciak <pa...@osciak.com>
>> ---
>>  drivers/media/v4l2-core/videobuf2-dma-sg.c | 149 +++++++++++++++++++++++---
>>  1 file changed, 136 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c
>> b/drivers/media/v4l2-core/videobuf2-dma-sg.c index f671fab..ad6d5c7 100644
>> --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c
>> +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c
>> @@ -41,11 +41,19 @@ struct vb2_dma_sg_buf {
>>      int                             offset;
>>      enum dma_data_direction         dma_dir;
>>      struct sg_table                 sg_table;
>> +    /*
>> +     * This will point to sg_table when used with the MMAP or USERPTR
>> +     * memory model, and to the dma_buf sglist when used with the
>> +     * DMABUF memory model.
>> +     */
>> +    struct sg_table                 *dma_sgt;
>>      size_t                          size;
>>      unsigned int                    num_pages;
>>      atomic_t                        refcount;
>>      struct vb2_vmarea_handler       handler;
>>      struct vm_area_struct           *vma;
>> +
>> +    struct dma_buf_attachment       *db_attach;
>>  };
>>
>>  static void vb2_dma_sg_put(void *buf_priv);
>> @@ -112,6 +120,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned
>> long size, buf->size = size;
>>      /* size is already page aligned */
>>      buf->num_pages = size >> PAGE_SHIFT;
>> +    buf->dma_sgt = &buf->sg_table;
>>
>>      buf->pages = kzalloc(buf->num_pages * sizeof(struct page *),
>>                           GFP_KERNEL);
>> @@ -122,7 +131,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned
>> long size, if (ret)
>>              goto fail_pages_alloc;
>>
>> -    ret = sg_alloc_table_from_pages(&buf->sg_table, buf->pages,
>> +    ret = sg_alloc_table_from_pages(buf->dma_sgt, buf->pages,
>>                      buf->num_pages, 0, size, GFP_KERNEL);
>>      if (ret)
>>              goto fail_table_alloc;
>> @@ -171,7 +180,7 @@ static void vb2_dma_sg_put(void *buf_priv)
>>              dma_unmap_sg(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
>>              if (buf->vaddr)
>>                      vm_unmap_ram(buf->vaddr, buf->num_pages);
>> -            sg_free_table(&buf->sg_table);
>> +            sg_free_table(buf->dma_sgt);
>>              while (--i >= 0)
>>                      __free_page(buf->pages[i]);
>>              kfree(buf->pages);
>> @@ -183,7 +192,11 @@ static void vb2_dma_sg_put(void *buf_priv)
>>  static void vb2_dma_sg_prepare(void *buf_priv)
>>  {
>>      struct vb2_dma_sg_buf *buf = buf_priv;
>> -    struct sg_table *sgt = &buf->sg_table;
>> +    struct sg_table *sgt = buf->dma_sgt;
>> +
>> +    /* DMABUF exporter will flush the cache for us */
>> +    if (buf->db_attach)
>> +            return;
> 
> Is this actually true ? If you look at the export code in patch 08/12, I 
> don't 
> see where the exporter would sync the buffer for the importer device.

I think this was true at some point in the past. It ties in with my comment for
patch 06/12: cpu/device syncing for dma-buf is (and was) broken, although nobody
has noticed since none of the DMABUF-aware drivers that are used as such today
need CPU access to the buffer, or are only used on Intel architectures where
this is all moot. Patches 12-16 of my RFCv6 series really fix this. This 
particular
comment was copied from the dma-contig version. The basic idea was that when the
driver needs CPU access it will call the vaddr memop, which will map the buffer
for CPU access.

However, I am not sure whether dmabuf actually did the right thing there 
originally.
Later dmabuf was extended with begin/end_for_cpu_access ops to make this 
explicit,
but that was never implemented in vb2. That's what the second part of RFCv6 
does.

Right now dma-sg is bug-compatible with dma-contig.

I spend 1-2 hours with Pawel in Düsseldorf figuring this out, it is not exactly
trivial to understand.

Regards,

        Hans

> 
>>
>>      dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
>>  }
>> @@ -191,7 +204,11 @@ static void vb2_dma_sg_prepare(void *buf_priv)
>>  static void vb2_dma_sg_finish(void *buf_priv)
>>  {
>>      struct vb2_dma_sg_buf *buf = buf_priv;
>> -    struct sg_table *sgt = &buf->sg_table;
>> +    struct sg_table *sgt = buf->dma_sgt;
>> +
>> +    /* DMABUF exporter will flush the cache for us */
>> +    if (buf->db_attach)
>> +            return;
>>
>>      dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
>>  }
>> @@ -219,6 +236,7 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx,
>> unsigned long vaddr, buf->dma_dir = dma_dir;
>>      buf->offset = vaddr & ~PAGE_MASK;
>>      buf->size = size;
>> +    buf->dma_sgt = &buf->sg_table;
>>
>>      first = (vaddr           & PAGE_MASK) >> PAGE_SHIFT;
>>      last  = ((vaddr + size - 1) & PAGE_MASK) >> PAGE_SHIFT;
>> @@ -271,7 +289,7 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx,
>> unsigned long vaddr, if (num_pages_from_user != buf->num_pages)
>>              goto userptr_fail_get_user_pages;
>>
>> -    if (sg_alloc_table_from_pages(&buf->sg_table, buf->pages,
>> +    if (sg_alloc_table_from_pages(buf->dma_sgt, buf->pages,
>>                      buf->num_pages, buf->offset, size, 0))
>>              goto userptr_fail_alloc_table_from_pages;
>>
>> @@ -313,7 +331,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
>>      dma_unmap_sg(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
>>      if (buf->vaddr)
>>              vm_unmap_ram(buf->vaddr, buf->num_pages);
>> -    sg_free_table(&buf->sg_table);
>> +    sg_free_table(buf->dma_sgt);
>>      while (--i >= 0) {
>>              if (buf->dma_dir == DMA_FROM_DEVICE)
>>                      set_page_dirty_lock(buf->pages[i]);
>> @@ -331,14 +349,16 @@ static void *vb2_dma_sg_vaddr(void *buf_priv)
>>
>>      BUG_ON(!buf);
>>
>> -    if (!buf->vaddr)
>> -            buf->vaddr = vm_map_ram(buf->pages,
>> -                                    buf->num_pages,
>> -                                    -1,
>> -                                    PAGE_KERNEL);
>> +    if (!buf->vaddr) {
>> +            if (buf->db_attach)
>> +                    buf->vaddr = dma_buf_vmap(buf->db_attach->dmabuf);
>> +            else
>> +                    buf->vaddr = vm_map_ram(buf->pages,
>> +                                    buf->num_pages, -1, PAGE_KERNEL);
>> +    }
>>
>>      /* add offset in case userptr is not page-aligned */
>> -    return buf->vaddr + buf->offset;
>> +    return buf->vaddr ? buf->vaddr + buf->offset : NULL;
> 
> Just nitpicking here, can vm_map_ram fail and return NULL ? If so this change 
> is a separate bug fix and should be split to a separate patch.
> 
>>  }
>>
>>  static unsigned int vb2_dma_sg_num_users(void *buf_priv)
>> @@ -385,11 +405,110 @@ static int vb2_dma_sg_mmap(void *buf_priv, struct
>> vm_area_struct *vma) return 0;
>>  }
>>
>> +/*********************************************/
>> +/*       callbacks for DMABUF buffers        */
>> +/*********************************************/
>> +
>> +static int vb2_dma_sg_map_dmabuf(void *mem_priv)
>> +{
>> +    struct vb2_dma_sg_buf *buf = mem_priv;
>> +    struct sg_table *sgt;
>> +
>> +    if (WARN_ON(!buf->db_attach)) {
>> +            pr_err("trying to pin a non attached buffer\n");
>> +            return -EINVAL;
>> +    }
>> +
>> +    if (WARN_ON(buf->dma_sgt)) {
>> +            pr_err("dmabuf buffer is already pinned\n");
>> +            return 0;
>> +    }
>> +
>> +    /* get the associated scatterlist for this buffer */
>> +    sgt = dma_buf_map_attachment(buf->db_attach, buf->dma_dir);
>> +    if (IS_ERR(sgt)) {
>> +            pr_err("Error getting dmabuf scatterlist\n");
>> +            return -EINVAL;
>> +    }
>> +
>> +    buf->dma_sgt = sgt;
>> +    buf->vaddr = NULL;
>> +
>> +    return 0;
>> +}
>> +
>> +static void vb2_dma_sg_unmap_dmabuf(void *mem_priv)
>> +{
>> +    struct vb2_dma_sg_buf *buf = mem_priv;
>> +    struct sg_table *sgt = buf->dma_sgt;
>> +
>> +    if (WARN_ON(!buf->db_attach)) {
>> +            pr_err("trying to unpin a not attached buffer\n");
>> +            return;
>> +    }
>> +
>> +    if (WARN_ON(!sgt)) {
>> +            pr_err("dmabuf buffer is already unpinned\n");
>> +            return;
>> +    }
>> +
>> +    if (buf->vaddr) {
>> +            dma_buf_vunmap(buf->db_attach->dmabuf, buf->vaddr);
>> +            buf->vaddr = NULL;
>> +    }
>> +    dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir);
>> +
>> +    buf->dma_sgt = NULL;
>> +}
>> +
>> +static void vb2_dma_sg_detach_dmabuf(void *mem_priv)
>> +{
>> +    struct vb2_dma_sg_buf *buf = mem_priv;
>> +
>> +    /* if vb2 works correctly you should never detach mapped buffer */
>> +    if (WARN_ON(buf->dma_sgt))
>> +            vb2_dma_sg_unmap_dmabuf(buf);
>> +
>> +    /* detach this attachment */
>> +    dma_buf_detach(buf->db_attach->dmabuf, buf->db_attach);
>> +    kfree(buf);
>> +}
>> +
>> +static void *vb2_dma_sg_attach_dmabuf(void *alloc_ctx, struct dma_buf
>> *dbuf, +     unsigned long size, enum dma_data_direction dma_dir)
>> +{
>> +    struct vb2_dma_sg_conf *conf = alloc_ctx;
>> +    struct vb2_dma_sg_buf *buf;
>> +    struct dma_buf_attachment *dba;
>> +
>> +    if (dbuf->size < size)
>> +            return ERR_PTR(-EFAULT);
>> +
>> +    buf = kzalloc(sizeof(*buf), GFP_KERNEL);
>> +    if (!buf)
>> +            return ERR_PTR(-ENOMEM);
>> +
>> +    buf->dev = conf->dev;
>> +    /* create attachment for the dmabuf with the user device */
>> +    dba = dma_buf_attach(dbuf, buf->dev);
>> +    if (IS_ERR(dba)) {
>> +            pr_err("failed to attach dmabuf\n");
>> +            kfree(buf);
>> +            return dba;
>> +    }
>> +
>> +    buf->dma_dir = dma_dir;
>> +    buf->size = size;
>> +    buf->db_attach = dba;
>> +
>> +    return buf;
>> +}
>> +
>>  static void *vb2_dma_sg_cookie(void *buf_priv)
>>  {
>>      struct vb2_dma_sg_buf *buf = buf_priv;
>>
>> -    return &buf->sg_table;
>> +    return buf->dma_sgt;
>>  }
>>
>>  const struct vb2_mem_ops vb2_dma_sg_memops = {
>> @@ -402,6 +521,10 @@ const struct vb2_mem_ops vb2_dma_sg_memops = {
>>      .vaddr          = vb2_dma_sg_vaddr,
>>      .mmap           = vb2_dma_sg_mmap,
>>      .num_users      = vb2_dma_sg_num_users,
>> +    .map_dmabuf     = vb2_dma_sg_map_dmabuf,
>> +    .unmap_dmabuf   = vb2_dma_sg_unmap_dmabuf,
>> +    .attach_dmabuf  = vb2_dma_sg_attach_dmabuf,
>> +    .detach_dmabuf  = vb2_dma_sg_detach_dmabuf,
>>      .cookie         = vb2_dma_sg_cookie,
>>  };
>>  EXPORT_SYMBOL_GPL(vb2_dma_sg_memops);
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to