Hi Andrew,
FYI: I need to test this myself and understand it better, so it will take some
time before I get to this. It is in my TODO list, so it won't be forgotten.
Regards,
Hans
On 11/05/2014 09:11 PM, Andrey Utkin wrote:
> Dropping code (introduced in 316d9e84a72069e04e483de0d5934c1d75f6a44c)
> which intends to make raising of motion events more "smooth"(?).
>
> It made motion event never appear in my installation.
> That code is complicated, so I couldn't figure out quickly how to fix
> it, so dropping it seems better to me.
>
> Another justification is that anyway application would implement
> "motion signal stabilization" if required, it is not necessarily kernel
> driver's job.
>
> Signed-off-by: Andrey Utkin <andrey.ut...@corp.bluecherry.net>
> ---
> drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 30
> +-------------------------
> drivers/media/pci/solo6x10/solo6x10.h | 2 --
> 2 files changed, 1 insertion(+), 31 deletions(-)
>
> diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
> b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
> index 30e09d9..866f7b3 100644
> --- a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
> +++ b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
> @@ -239,8 +239,6 @@ static int solo_enc_on(struct solo_enc_dev *solo_enc)
> if (solo_enc->bw_weight > solo_dev->enc_bw_remain)
> return -EBUSY;
> solo_enc->sequence = 0;
> - solo_enc->motion_last_state = false;
> - solo_enc->frames_since_last_motion = 0;
> solo_dev->enc_bw_remain -= solo_enc->bw_weight;
>
> if (solo_enc->type == SOLO_ENC_TYPE_EXT)
> @@ -555,36 +553,12 @@ static int solo_enc_fillbuf(struct solo_enc_dev
> *solo_enc,
> }
>
> if (!ret) {
> - bool send_event = false;
> -
> vb->v4l2_buf.sequence = solo_enc->sequence++;
> vb->v4l2_buf.timestamp.tv_sec = vop_sec(vh);
> vb->v4l2_buf.timestamp.tv_usec = vop_usec(vh);
>
> /* Check for motion flags */
> - if (solo_is_motion_on(solo_enc)) {
> - /* It takes a few frames for the hardware to detect
> - * motion. Once it does it clears the motion detection
> - * register and it takes again a few frames before
> - * motion is seen. This means in practice that when the
> - * motion field is 1, it will go back to 0 for the next
> - * frame. This leads to motion detection event being
> - * sent all the time, which is not what we want.
> - * Instead wait a few frames before deciding that the
> - * motion has halted. After some experimentation it
> - * turns out that waiting for 5 frames works well.
> - */
> - if (enc_buf->motion == 0 &&
> - solo_enc->motion_last_state &&
> - solo_enc->frames_since_last_motion++ > 5)
> - send_event = true;
> - else if (enc_buf->motion) {
> - solo_enc->frames_since_last_motion = 0;
> - send_event = !solo_enc->motion_last_state;
> - }
> - }
> -
> - if (send_event) {
> + if (solo_is_motion_on(solo_enc) && enc_buf->motion) {
> struct v4l2_event ev = {
> .type = V4L2_EVENT_MOTION_DET,
> .u.motion_det = {
> @@ -594,8 +568,6 @@ static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
> },
> };
>
> - solo_enc->motion_last_state = enc_buf->motion;
> - solo_enc->frames_since_last_motion = 0;
> v4l2_event_queue(solo_enc->vfd, &ev);
> }
> }
> diff --git a/drivers/media/pci/solo6x10/solo6x10.h
> b/drivers/media/pci/solo6x10/solo6x10.h
> index 72017b7..dc503fd 100644
> --- a/drivers/media/pci/solo6x10/solo6x10.h
> +++ b/drivers/media/pci/solo6x10/solo6x10.h
> @@ -159,8 +159,6 @@ struct solo_enc_dev {
> u16 motion_thresh;
> bool motion_global;
> bool motion_enabled;
> - bool motion_last_state;
> - u8 frames_since_last_motion;
> u16 width;
> u16 height;
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
