Add CI support for DVBSky T980C.

I used the new host device independent CIMaX SP2 I2C driver to implement it.

cx23885_sp2_ci_ctrl function is borrowed entirely from cimax2.c.

Signed-off-by: Olli Salonen <olli.salo...@iki.fi>
---
 drivers/media/pci/cx23885/cx23885-dvb.c | 105 +++++++++++++++++++++++++++++++-
 1 file changed, 103 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c 
b/drivers/media/pci/cx23885/cx23885-dvb.c
index cc88997..70dbcd6 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -71,6 +71,7 @@
 #include "si2165.h"
 #include "si2168.h"
 #include "si2157.h"
+#include "sp2.h"
 #include "m88ds3103.h"
 #include "m88ts2022.h"
 
@@ -616,6 +617,76 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend 
*fe,
        return 0;
 }
 
+static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
+                               u8 data, int *mem)
+{
+
+       /* MC417 */
+       #define SP2_DATA              0x000000ff
+       #define SP2_WR                0x00008000
+       #define SP2_RD                0x00004000
+       #define SP2_ACK               0x00001000
+       #define SP2_ADHI              0x00000800
+       #define SP2_ADLO              0x00000400
+       #define SP2_CS1               0x00000200
+       #define SP2_CS0               0x00000100
+       #define SP2_EN_ALL            0x00001000
+       #define SP2_CTRL_OFF          (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD)
+
+       struct cx23885_tsport *port = priv;
+       struct cx23885_dev *dev = port->dev;
+       int ret;
+       int tmp;
+       unsigned long timeout;
+
+       mutex_lock(&dev->gpio_lock);
+
+       /* write addr */
+       cx_write(MC417_OEN, SP2_EN_ALL);
+       cx_write(MC417_RWD, SP2_CTRL_OFF |
+                               SP2_ADLO | (0xff & addr));
+       cx_clear(MC417_RWD, SP2_ADLO);
+       cx_write(MC417_RWD, SP2_CTRL_OFF |
+                               SP2_ADHI | (0xff & (addr >> 8)));
+       cx_clear(MC417_RWD, SP2_ADHI);
+
+       if (read) { /* data in */
+               cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA);
+       } else /* data out */
+               cx_write(MC417_RWD, SP2_CTRL_OFF | data);
+
+       /* chip select 0 */
+       cx_clear(MC417_RWD, SP2_CS0);
+
+       /* read/write */
+       cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR);
+
+       timeout = jiffies + msecs_to_jiffies(1);
+       for (;;) {
+               tmp = cx_read(MC417_RWD);
+               if ((tmp & SP2_ACK) == 0)
+                       break;
+               if (time_after(jiffies, timeout))
+                       break;
+               udelay(1);
+       }
+
+       cx_set(MC417_RWD, SP2_CTRL_OFF);
+       *mem = tmp & 0xff;
+
+       mutex_unlock(&dev->gpio_lock);
+
+       if (!read)
+               if (*mem < 0) {
+                       ret = -EREMOTEIO;
+                       goto err;
+               }
+
+       return 0;
+err:
+       return ret;
+}
+
 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
 {
        struct dtv_frontend_properties *p = &fe->dtv_property_cache;
@@ -944,11 +1015,11 @@ static int dvb_register(struct cx23885_tsport *port)
        struct vb2_dvb_frontend *fe0, *fe1 = NULL;
        struct si2168_config si2168_config;
        struct si2157_config si2157_config;
+       struct sp2_config sp2_config;
        struct m88ts2022_config m88ts2022_config;
        struct i2c_board_info info;
        struct i2c_adapter *adapter;
-       struct i2c_client *client_demod;
-       struct i2c_client *client_tuner;
+       struct i2c_client *client_demod, *client_tuner, *client_ci;
        int mfe_shared = 0; /* bus not shared by default */
        int ret;
 
@@ -1683,6 +1754,7 @@ static int dvb_register(struct cx23885_tsport *port)
                break;
        case CX23885_BOARD_DVBSKY_T980C:
                i2c_bus = &dev->i2c_bus[1];
+               i2c_bus2 = &dev->i2c_bus[0];
 
                /* attach frontend */
                memset(&si2168_config, 0, sizeof(si2168_config));
@@ -1820,6 +1892,35 @@ static int dvb_register(struct cx23885_tsport *port)
        case CX23885_BOARD_DVBSKY_T980C: {
                u8 eeprom[256]; /* 24C02 i2c eeprom */
 
+               /* attach CI */
+               memset(&sp2_config, 0, sizeof(sp2_config));
+               sp2_config.dvb_adap = &port->frontends.adapter;
+               sp2_config.priv = port;
+               sp2_config.ci_control = cx23885_sp2_ci_ctrl;
+               memset(&info, 0, sizeof(struct i2c_board_info));
+               strlcpy(info.type, "sp2", I2C_NAME_SIZE);
+               info.addr = 0x40;
+               info.platform_data = &sp2_config;
+               request_module(info.type);
+               client_ci = i2c_new_device(&i2c_bus2->i2c_adap, &info);
+               if (client_ci == NULL ||
+                               client_ci->dev.driver == NULL) {
+                       module_put(client_tuner->dev.driver->owner);
+                       i2c_unregister_device(client_tuner);
+                       module_put(client_demod->dev.driver->owner);
+                       i2c_unregister_device(client_demod);
+                       goto frontend_detach;
+               }
+               if (!try_module_get(client_ci->dev.driver->owner)) {
+                       i2c_unregister_device(client_ci);
+                       module_put(client_tuner->dev.driver->owner);
+                       i2c_unregister_device(client_tuner);
+                       module_put(client_demod->dev.driver->owner);
+                       i2c_unregister_device(client_demod);
+                       goto frontend_detach;
+               }
+               port->i2c_client_ci = client_ci;
+
                if (port->nr != 1)
                        break;
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to