From: Hans Verkuil <hans.verk...@cisco.com>

If a queue was canceled, then the buf_finish op was never called for the
pending buffers. So add this call to queue_cancel. Before calling buf_finish
set the buffer state to PREPARED, which is the correct state. That way the
states DONE and ERROR will only be seen in buf_finish if streaming is in
progress.

Since buf_finish can now be called from non-streaming state we need to
adapt the handful of drivers that actually need to know this.

Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
 drivers/media/parport/bw-qcam.c          |  3 +++
 drivers/media/pci/sta2x11/sta2x11_vip.c  |  3 ++-
 drivers/media/usb/uvc/uvc_queue.c        |  3 ++-
 drivers/media/v4l2-core/videobuf2-core.c | 14 ++++++++++++--
 include/media/videobuf2-core.h           | 10 +++++++++-
 5 files changed, 28 insertions(+), 5 deletions(-)

diff --git a/drivers/media/parport/bw-qcam.c b/drivers/media/parport/bw-qcam.c
index 0166aef..8d69bfb 100644
--- a/drivers/media/parport/bw-qcam.c
+++ b/drivers/media/parport/bw-qcam.c
@@ -674,6 +674,9 @@ static void buffer_finish(struct vb2_buffer *vb)
        int size = vb->vb2_queue->plane_sizes[0];
        int len;
 
+       if (!vb2_is_streaming(vb->vb2_queue))
+               return;
+
        mutex_lock(&qcam->lock);
        parport_claim_or_block(qcam->pdev);
 
diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c 
b/drivers/media/pci/sta2x11/sta2x11_vip.c
index e66556c..bb11443 100644
--- a/drivers/media/pci/sta2x11/sta2x11_vip.c
+++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
@@ -337,7 +337,8 @@ static void buffer_finish(struct vb2_buffer *vb)
        list_del_init(&vip_buf->list);
        spin_unlock(&vip->lock);
 
-       vip_active_buf_next(vip);
+       if (vb2_is_streaming(vb->vb2_queue))
+               vip_active_buf_next(vip);
 }
 
 static int start_streaming(struct vb2_queue *vq, unsigned int count)
diff --git a/drivers/media/usb/uvc/uvc_queue.c 
b/drivers/media/usb/uvc/uvc_queue.c
index cca2c6e..ab9f96e 100644
--- a/drivers/media/usb/uvc/uvc_queue.c
+++ b/drivers/media/usb/uvc/uvc_queue.c
@@ -111,7 +111,8 @@ static void uvc_buffer_finish(struct vb2_buffer *vb)
                        container_of(queue, struct uvc_streaming, queue);
        struct uvc_buffer *buf = container_of(vb, struct uvc_buffer, buf);
 
-       uvc_video_clock_update(stream, &vb->v4l2_buf, buf);
+       if (vb->state == VB2_BUF_STATE_DONE)
+               uvc_video_clock_update(stream, &vb->v4l2_buf, buf);
 }
 
 static void uvc_wait_prepare(struct vb2_queue *vq)
diff --git a/drivers/media/v4l2-core/videobuf2-core.c 
b/drivers/media/v4l2-core/videobuf2-core.c
index 59bfd85..6f84bcb 100644
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -1878,9 +1878,19 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
 
        /*
         * Reinitialize all buffers for next use.
+        * Make sure to call buf_finish for any queued buffers. Normally
+        * that's done in dqbuf, but that's not going to happen when we
+        * cancel the whole queue.
         */
-       for (i = 0; i < q->num_buffers; ++i)
-               __vb2_dqbuf(q->bufs[i]);
+       for (i = 0; i < q->num_buffers; ++i) {
+               struct vb2_buffer *vb = q->bufs[i];
+
+               if (vb->state != VB2_BUF_STATE_DEQUEUED) {
+                       vb->state = VB2_BUF_STATE_PREPARED;
+                       call_vb_qop(vb, buf_finish, vb);
+               }
+               __vb2_dqbuf(vb);
+       }
 }
 
 static int vb2_internal_streamon(struct vb2_queue *q, enum v4l2_buf_type type)
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index f443ce0..3cb0bcf 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -276,7 +276,15 @@ struct vb2_buffer {
  *                     in driver; optional
  * @buf_finish:                called before every dequeue of the buffer back 
to
  *                     userspace; drivers may perform any operations required
- *                     before userspace accesses the buffer; optional
+ *                     before userspace accesses the buffer; optional. The
+ *                     buffer state can be one of the following: DONE and
+ *                     ERROR occur while streaming is in progress, and the
+ *                     PREPARED state occurs when the queue has been canceled
+ *                     and all pending buffers are being returned to their
+ *                     default DEQUEUED state. Typically you only have to do
+ *                     something if the state is VB2_BUF_STATE_DONE, since in
+ *                     all other cases the buffer contents will be ignored
+ *                     anyway.
  * @buf_cleanup:       called once before the buffer is freed; drivers may
  *                     perform any additional cleanup; optional
  * @start_streaming:   called once to enter 'streaming' state; the driver may
-- 
1.9.rc1

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to