Hi Randy, We also experienced this issue. One of the changes in the v4l2 core affected the MFC driver. A fix for MFC has been prepared by Marek Szyprowski and should be sent out soon.
Also another tip - in 3.13 a check on bytesused and length fields in planes array has been implemented. So make sure to set them appropriately. Best wishes, -- Kamil Debski Samsung R&D Institute Poland > -----Original Message----- > From: randy [mailto:lxr1...@hotmail.com] > Sent: Tuesday, December 03, 2013 11:15 AM > To: linux-media@vger.kernel.org > Cc: kyungmin.p...@samsung.com; k.deb...@samsung.com; > m.che...@samsung.com; jtp.p...@samsung.com > Subject: Can't open mfc v5 encode but decode can > > The kernel is 3.13-rc2, the mfc has been configured by dts, the dts is > attached below. I have placed s5p-mfc.fw in /lib/firmware/ . > I can use v4l2-ctl(from v4l2-utils) the encoder in the manufacturer > kernel, but I can't in here. What is the problem? > Thank you > ==================================log================================== > > root@mifu:~# dmesg|grep mfc > [ 3.165000] s5p-mfc 13400000.codec: decoder registered as > /dev/video0 > [ 3.170000] s5p-mfc 13400000.codec: encoder registered as > /dev/video1 > root@mifu:~# v4l2-ctl -d /dev/video0 --all Driver Info (not using > libv4l2): > Driver name : 13400000.codec[ 153.415000] vidioc_g_crop:777: > Cannont set crop > > Card type : 13400000.codec > Bus info : > Driver version: 1.0.0 > Capabilities : 0x04007000 > Video Capture Multiplanar > Video Output Multiplanar > Streaming > root@mifu:~# v4l2-ctl -d /dev/video1 --all Failed to open /dev/video1: > No such file or directory > =============================dts===================== > diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts > b/arch/arm/boot/dts/exynos4412-tiny4412.dts > new file mode 100644 > index 0000000..fedd9cc > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts > @@ -0,0 +1,173 @@ > +/* > + * Hardkernel's Exynos4412 based tiny4412 1306 board device tree > source > + * > + * Copyright (c) 2013 Tomoya Gitsufuki <ay...@mail.soulik.info> > + * > + * Device tree source file for Friendyarm tiny4412 1306 board which > is based on > + * Samsung's Exynos4412 SoC. > + * > + * This program is free software; you can redistribute it and/or > modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +#include "exynos4412.dtsi" > + > +/ { > + model = "Friendly Arm Tiny4412 1306 board based on Exynos4412"; > + compatible = "friendlyarm,tiny4412-1306", "samsung,exynos4412"; > + > + memory { > + reg = <0x40000000 0x40000000>; > + }; > + > + chosen { > + bootargs ="root=/dev/mmcblk0p1 rootfstype=ext4 rw > console=ttySAC0,115200 init=/sbin/init"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + led1 { > + label = "led1:heart"; > + gpios = <&gpm4 0 1>; > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > + led2 { > + label = "led2:mmc0"; > + gpios = <&gpm4 1 1>; > + default-state = "on"; > + linux,default-trigger = "mmc0"; > + }; > + > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + > + vemmc_reg: regulator-0 { > + compatible = "regulator-fixed"; > + regulator-name = "VMEM_VDD_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + gpio = <&gpk0 2 0>; > + enable-active-high; > + }; > + > + }; > + > + /* > + mshc@12550000 { > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; > + pinctrl-names = "default"; > + status = "okay"; > + > + vmmc-supply = <&vemmc_reg>; > + clocks = <&clock 301>, <&clock 149>; > + clocks-name = "biu", "ciu"; > + > + num-slots = <1>; > + supports-highspeed; > + broken-cd; > + fifo-depth = <0x80>; > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <2 3>; > + samsung,dw-mshc-ddr-timing = <1 2>; > + > + slot@0 { > + reg = <0>; > + bus-width = <8>; > + > + }; > + }; > + */ > + > + rtc@10070000 { > + status = "okay"; > + }; > + > + sdhci@12530000 { > + bus-width = <4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; > + pinctrl-names = "default"; > + status = "okay"; > + }; > + sdhci@1254000 { > + bus-width = <4>; > + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &sd3_cd>; > + pinctrl-names = "default"; > + status = "okay"; > + }; > + > + usb_phy: usbphy@125B0000 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "samsung,exynos4210-usb2phy"; > + reg = <0x125B0000 0x100>; > + ranges; > + status = "okay"; > + > + clocks = <&clock 2>, <&clock 305>; > + clock-names = "xusbxti", "otg"; > + usbphy-sys { > + /* USB device and host PHY_CONTROL registers */ > + /*reg = <0x10020704 0xc 0x1001021c 0x4>;*/ > + reg = <0x10020704 0x8>; > + }; > + }; > + > + ehci@12580000 { > + usb-phy = <&usb_phy>; > + status = "okay"; > + }; > + > + codec@13400000 { > + samsung,mfc-r = <0x43000000 0x800000>; > + samsung,mfc-l = <0x51000000 0x800000>; > + status = "okay"; > + }; > + > + serial@13800000 { > + status = "okay"; > + }; > + > + serial@13810000 { > + status = "okay"; > + }; > + > + serial@13820000 { > + status = "okay"; > + }; > + > + serial@13830000 { > + status = "okay"; > + }; > + > + fixed-rate-clocks { > + xxti { > + compatible = "samsung,clock-xxti"; > + clock-frequency = <0>; > + }; > + > + xusbxti { > + compatible = "samsung,clock-xusbxti"; > + clock-frequency = <24000000>; > + }; > + }; > + > + i2c@13860000 { > + status = "okay"; > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-max-bus-freq = <200000>; > + > + wm8960@10 { > + compatible = "wlf,wm8960"; > + reg = <0x10>; > + }; > + }; > +}; -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
