There are some init stuff to be done for each new tuner at the
demod code. Add the code there for r820t.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
drivers/media/dvb-frontends/rtl2832.c | 76 +++++++++++++++++++++++-------
drivers/media/dvb-frontends/rtl2832.h | 1 +
drivers/media/dvb-frontends/rtl2832_priv.h | 28 +++++++++++
3 files changed, 88 insertions(+), 17 deletions(-)
diff --git a/drivers/media/dvb-frontends/rtl2832.c
b/drivers/media/dvb-frontends/rtl2832.c
index 7388769..b6f50c7 100644
--- a/drivers/media/dvb-frontends/rtl2832.c
+++ b/drivers/media/dvb-frontends/rtl2832.c
@@ -432,22 +432,12 @@ static int rtl2832_init(struct dvb_frontend *fe)
{DVBT_TR_THD_SET2, 0x6},
{DVBT_TRK_KC_I2, 0x5},
{DVBT_CR_THD_SET2, 0x1},
- {DVBT_SPEC_INV, 0x0},
};
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0);
- /*
- * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
- * / CrystalFreqHz)
- */
- pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
- pset_iffreq *= 0x400000;
- pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
- pset_iffreq = pset_iffreq & 0x3fffff;
-
for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg,
rtl2832_initial_regs[i].value);
@@ -472,6 +462,10 @@ static int rtl2832_init(struct dvb_frontend *fe)
len = ARRAY_SIZE(rtl2832_tuner_init_e4000);
init = rtl2832_tuner_init_e4000;
break;
+ case RTL2832_TUNER_R820T:
+ len = ARRAY_SIZE(rtl2832_tuner_init_r820t);
+ init = rtl2832_tuner_init_r820t;
+ break;
default:
ret = -EINVAL;
goto err;
@@ -483,14 +477,43 @@ static int rtl2832_init(struct dvb_frontend *fe)
goto err;
}
- /* if frequency settings */
- ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
- if (ret)
- goto err;
+ /*
+ * if frequency settings
+ * Some tuners (r820t) don't initialize IF here; instead; they do it
+ * at set_params()
+ */
+ if (!fe->ops.tuner_ops.get_if_frequency) {
+ /*
+ * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
+ * / CrystalFreqHz)
+ */
+ pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
+ pset_iffreq *= 0x400000;
+ pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
+ pset_iffreq = pset_iffreq & 0x3fffff;
+ ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
+ if (ret)
+ goto err;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
+ if (ret)
+ goto err;
+ }
- ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
- if (ret)
- goto err;
+ /*
+ * r820t NIM code does a software reset here at the demod -
+ * may not be needed, as there's already a software reset at
set_params()
+ */
+#if 1
+ /* soft reset */
+ ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
+ if (ret)
+ goto err;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
+ if (ret)
+ goto err;
+#endif
priv->sleeping = false;
@@ -564,6 +587,25 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe)
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe);
+ /* If the frontend has get_if_frequency(), use it */
+ if (fe->ops.tuner_ops.get_if_frequency) {
+ u32 if_freq;
+ u64 pset_iffreq;
+
+ ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
+ if (ret)
+ goto err;
+
+ pset_iffreq = if_freq % priv->cfg.xtal;
+ pset_iffreq *= 0x400000;
+ pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
+ pset_iffreq = pset_iffreq & 0x3fffff;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
+ if (ret)
+ goto err;
+ }
+
switch (c->bandwidth_hz) {
case 6000000:
i = 0;
diff --git a/drivers/media/dvb-frontends/rtl2832.h
b/drivers/media/dvb-frontends/rtl2832.h
index fefba0e..91b2dcf 100644
--- a/drivers/media/dvb-frontends/rtl2832.h
+++ b/drivers/media/dvb-frontends/rtl2832.h
@@ -52,6 +52,7 @@ struct rtl2832_config {
#define RTL2832_TUNER_FC0012 0x26
#define RTL2832_TUNER_E4000 0x27
#define RTL2832_TUNER_FC0013 0x29
+#define RTL2832_TUNER_R820T 0x2a
u8 tuner;
};
diff --git a/drivers/media/dvb-frontends/rtl2832_priv.h
b/drivers/media/dvb-frontends/rtl2832_priv.h
index 7d97ce9..b5f2b80 100644
--- a/drivers/media/dvb-frontends/rtl2832_priv.h
+++ b/drivers/media/dvb-frontends/rtl2832_priv.h
@@ -267,6 +267,7 @@ static const struct rtl2832_reg_value
rtl2832_tuner_init_tua9001[] = {
{DVBT_OPT_ADC_IQ, 0x1},
{DVBT_AD_AVI, 0x0},
{DVBT_AD_AVQ, 0x0},
+ {DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = {
@@ -300,6 +301,7 @@ static const struct rtl2832_reg_value
rtl2832_tuner_init_fc0012[] = {
{DVBT_GI_PGA_STATE, 0x0},
{DVBT_EN_AGC_PGA, 0x1},
{DVBT_IF_AGC_MAN, 0x0},
+ {DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = {
@@ -337,6 +339,32 @@ static const struct rtl2832_reg_value
rtl2832_tuner_init_e4000[] = {
{DVBT_REG_MONSEL, 0x1},
{DVBT_REG_MON, 0x1},
{DVBT_REG_4MSEL, 0x0},
+ {DVBT_SPEC_INV, 0x0},
+};
+
+static const struct rtl2832_reg_value rtl2832_tuner_init_r820t[] = {
+ {DVBT_DAGC_TRG_VAL, 0x39},
+ {DVBT_AGC_TARG_VAL_0, 0x0},
+ {DVBT_AGC_TARG_VAL_8_1, 0x40},
+ {DVBT_AAGC_LOOP_GAIN, 0x16},
+ {DVBT_LOOP_GAIN2_3_0, 0x8},
+ {DVBT_LOOP_GAIN2_4, 0x1},
+ {DVBT_LOOP_GAIN3, 0x18},
+ {DVBT_VTOP1, 0x35},
+ {DVBT_VTOP2, 0x21},
+ {DVBT_VTOP3, 0x21},
+ {DVBT_KRF1, 0x0},
+ {DVBT_KRF2, 0x40},
+ {DVBT_KRF3, 0x10},
+ {DVBT_KRF4, 0x10},
+ {DVBT_IF_AGC_MIN, 0x80},
+ {DVBT_IF_AGC_MAX, 0x7f},
+ {DVBT_RF_AGC_MIN, 0x80},
+ {DVBT_RF_AGC_MAX, 0x7f},
+ {DVBT_POLAR_RF_AGC, 0x0},
+ {DVBT_POLAR_IF_AGC, 0x0},
+ {DVBT_AD7_SETTING, 0xe9f4},
+ {DVBT_SPEC_INV, 0x1},
};
#endif /* RTL2832_PRIV_H */
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
