This patch renames the B_vmalloc/B_DMA_contig/B_DMA_sg to B_VMALLOC/B_DMA_CONTIG/B_DMA_SG variables to avoid CamelCase warning reported by the checkpatch.pl script.
Signed-off-by: Albert Wang <[email protected]> Signed-off-by: Libin Yang <[email protected]> --- drivers/media/platform/marvell-ccic/cafe-driver.c | 2 +- drivers/media/platform/marvell-ccic/mcam-core.c | 38 ++++++++++----------- drivers/media/platform/marvell-ccic/mcam-core.h | 12 +++---- drivers/media/platform/marvell-ccic/mmp-driver.c | 2 +- 4 files changed, 27 insertions(+), 27 deletions(-) diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c index d030f9b..f85f119 100755 --- a/drivers/media/platform/marvell-ccic/cafe-driver.c +++ b/drivers/media/platform/marvell-ccic/cafe-driver.c @@ -486,7 +486,7 @@ static int cafe_pci_probe(struct pci_dev *pdev, * We *might* be able to run DMA_contig, especially on a system * with CMA in it. */ - mcam->buffer_mode = B_vmalloc; + mcam->buffer_mode = B_VMALLOC; /* * Get set up on the PCI bus. */ diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index 29c68f1..939c430 100755 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -554,7 +554,7 @@ static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) } /* - * Initial B_DMA_contig setup. + * Initial B_DMA_CONTIG setup. */ static void mcam_ctlr_dma_contig(struct mcam_camera *cam) { @@ -611,7 +611,7 @@ static void mcam_sg_next_buffer(struct mcam_camera *cam) } /* - * Initial B_DMA_sg setup + * Initial B_DMA_SG setup */ static void mcam_ctlr_dma_sg(struct mcam_camera *cam) { @@ -1005,7 +1005,7 @@ static int mcam_read_setup(struct mcam_camera *cam) * Configuration. If we still don't have DMA buffers, * make one last, desperate attempt. */ - if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 && + if (cam->buffer_mode == B_VMALLOC && cam->nbufs == 0 && mcam_alloc_dma_bufs(cam, 0)) return -ENOMEM; @@ -1051,13 +1051,13 @@ static int mcam_vb_queue_setup(struct vb2_queue *vq, void *alloc_ctxs[]) { struct mcam_camera *cam = vb2_get_drv_priv(vq); - int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2; + int minbufs = (cam->buffer_mode == B_DMA_CONTIG) ? 3 : 2; sizes[0] = cam->pix_format.sizeimage; *num_planes = 1; /* Someday we have to support planar formats... */ if (*nbufs < minbufs) *nbufs = minbufs; - if (cam->buffer_mode == B_DMA_contig) + if (cam->buffer_mode == B_DMA_CONTIG) alloc_ctxs[0] = cam->vb_alloc_ctx; return 0; } @@ -1144,7 +1144,7 @@ static int mcam_vb_start_streaming(struct vb2_queue *vq, unsigned int count) * destination. So go into a wait state and hope they * give us buffers soon. */ - if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) { + if (cam->buffer_mode != B_VMALLOC && list_empty(&cam->buffers)) { cam->state = S_BUFWAIT; return 0; } @@ -1285,7 +1285,7 @@ static int mcam_setup_vb2(struct mcam_camera *cam) vq->drv_priv = cam; INIT_LIST_HEAD(&cam->buffers); switch (cam->buffer_mode) { - case B_DMA_contig: + case B_DMA_CONTIG: #ifdef MCAM_MODE_DMA_CONTIG vq->ops = &mcam_vb2_ops; vq->mem_ops = &vb2_dma_contig_memops; @@ -1295,7 +1295,7 @@ static int mcam_setup_vb2(struct mcam_camera *cam) cam->frame_complete = mcam_dma_contig_done; #endif break; - case B_DMA_sg: + case B_DMA_SG: #ifdef MCAM_MODE_DMA_SG vq->ops = &mcam_vb2_sg_ops; vq->mem_ops = &vb2_dma_sg_memops; @@ -1304,7 +1304,7 @@ static int mcam_setup_vb2(struct mcam_camera *cam) cam->frame_complete = mcam_dma_sg_done; #endif break; - case B_vmalloc: + case B_VMALLOC: #ifdef MCAM_MODE_VMALLOC tasklet_init(&cam->s_tasklet, mcam_frame_tasklet, (unsigned long) cam); @@ -1324,7 +1324,7 @@ static void mcam_cleanup_vb2(struct mcam_camera *cam) { vb2_queue_release(&cam->vb_queue); #ifdef MCAM_MODE_DMA_CONTIG - if (cam->buffer_mode == B_DMA_contig) + if (cam->buffer_mode == B_DMA_CONTIG) vb2_dma_contig_cleanup_ctx(cam->vb_alloc_ctx); #endif } @@ -1536,7 +1536,7 @@ static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv, /* * Make sure we have appropriate DMA buffers. */ - if (cam->buffer_mode == B_vmalloc) { + if (cam->buffer_mode == B_VMALLOC) { ret = mcam_check_dma_buffers(cam); if (ret) goto out; @@ -1774,7 +1774,7 @@ static int mcam_v4l_release(struct file *filp) mcam_cleanup_vb2(cam); mcam_config_mipi(cam, 0); mcam_ctlr_power_down(cam); - if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) + if (cam->buffer_mode == B_VMALLOC && alloc_bufs_at_read) mcam_free_dma_bufs(cam); } if (cam->bus_type == V4L2_MBUS_CSI2) { @@ -1902,7 +1902,7 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs) mcam_frame_complete(cam, frame); handled = 1; clear_bit(CF_FRAME_SOF0 + frame, &cam->flags); - if (cam->buffer_mode == B_DMA_sg) + if (cam->buffer_mode == B_DMA_SG) break; } /* @@ -1919,7 +1919,7 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs) if (handled == IRQ_HANDLED) { set_bit(CF_DMA_ACTIVE, &cam->flags); - if (cam->buffer_mode == B_DMA_sg) + if (cam->buffer_mode == B_DMA_SG) mcam_ctlr_stop(cam); } return handled; @@ -1953,11 +1953,11 @@ int mccic_register(struct mcam_camera *cam) */ if (buffer_mode >= 0) cam->buffer_mode = buffer_mode; - if (cam->buffer_mode == B_DMA_sg && + if (cam->buffer_mode == B_DMA_SG && cam->chip_id == V4L2_IDENT_CAFE) { printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, " "attempting vmalloc mode instead\n"); - cam->buffer_mode = B_vmalloc; + cam->buffer_mode = B_VMALLOC; } if (!mcam_buffer_mode_supported(cam->buffer_mode)) { printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n", @@ -2010,7 +2010,7 @@ int mccic_register(struct mcam_camera *cam) /* * If so requested, try to get our DMA buffers now. */ - if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) { + if (cam->buffer_mode == B_VMALLOC && !alloc_bufs_at_read) { if (mcam_alloc_dma_bufs(cam, 1)) cam_warn(cam, "Unable to alloc DMA buffers at load" " will try again later."); @@ -2038,7 +2038,7 @@ void mccic_shutdown(struct mcam_camera *cam) mcam_ctlr_power_down(cam); } vb2_queue_release(&cam->vb_queue); - if (cam->buffer_mode == B_vmalloc) + if (cam->buffer_mode == B_VMALLOC) mcam_free_dma_bufs(cam); video_unregister_device(&cam->vdev); v4l2_device_unregister(&cam->v4l2_dev); @@ -2081,7 +2081,7 @@ int mccic_resume(struct mcam_camera *cam) * If there was a buffer in the DMA engine at suspend * time, put it back on the queue or we'll forget about it. */ - if (cam->buffer_mode == B_DMA_sg && cam->vb_bufs[0]) + if (cam->buffer_mode == B_DMA_SG && cam->vb_bufs[0]) list_add(&cam->vb_bufs[0]->queue, &cam->buffers); ret = mcam_read_setup(cam); } diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h index 692727d..263767e 100755 --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -47,9 +47,9 @@ enum mcam_state { * let the platform pick. */ enum mcam_buffer_mode { - B_vmalloc = 0, - B_DMA_contig = 1, - B_DMA_sg = 2 + B_VMALLOC = 0, + B_DMA_CONTIG = 1, + B_DMA_SG = 2 }; /* @@ -59,13 +59,13 @@ static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode) { switch (mode) { #ifdef MCAM_MODE_VMALLOC - case B_vmalloc: + case B_VMALLOC: #endif #ifdef MCAM_MODE_DMA_CONTIG - case B_DMA_contig: + case B_DMA_CONTIG: #endif #ifdef MCAM_MODE_DMA_SG - case B_DMA_sg: + case B_DMA_SG: #endif return 1; default: diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index d355840..89dd078 100755 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -365,7 +365,7 @@ static int mmpcam_probe(struct platform_device *pdev) mcam->mipi_enabled = 0; mcam->lane = pdata->lane; mcam->chip_id = V4L2_IDENT_ARMADA610; - mcam->buffer_mode = B_DMA_sg; + mcam->buffer_mode = B_DMA_SG; spin_lock_init(&mcam->dev_lock); /* * Get our I/O memory. -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
