Em Sun, 30 Sep 2012 05:49:26 +0200
Wolfgang Bail <[email protected]> escreveu:
> Hello,
>
> the ir-rc from my msi DigiVox mini II Version 3 (af9015) will not work since
> kernel 3.2.x (kubuntu 12.04), same with s2-liplianin or v4l.
>
> sudo ir-keytable -t shows:
>
> Testing events. Please, press CTRL-C to abort.
> 1348890734.303273: event MSC: scancode = 317
> 1348890734.303280: event key down: KEY_POWER (0x0074)
> 1348890734.303282: event sync
> 1348890734.553961: event key up: KEY_POWER (0x0074)
> 1348890734.553963: event sync
> 1348890741.303451: event MSC: scancode = 30d
> 1348890741.303457: event key down: KEY_DOWN (0x006c)
> 1348890741.303459: event sync
> ^[[B1348890741.553956: event key up: KEY_DOWN (0x006c)
>
> So I changed in rc-msi-digivox-ii.c { 0x0002, KEY_2 }, to { 0x0302, KEY_2 },
> and so on. And now it works well.
>
> I hope, my mini patch is standard, the first I made.
Well, you should have using a subject like:
[PATCH] rc-msi-digivox-ii: Add full scan keycodes
And your signed-off-by. There are some pages at linuxtv.org wiki that points
how to write a patch.
Yet, as this is a really trivial one, I'll accept it without your Signed-off-by.
> I don't know, whether
> there are different variants of remote controls. But I don't believe it,
> because it was ok with kernel 2.6.x.
No, this seems just yet-another-regression caused by some patch that changed
the code that gets IR scancode to report the 16-bit keycode, instead of
just the last 8 bits.
Thanks for it.
>
> @Mauro, thank you for the reply.
>
Regards,
Mauro
-
FYI, this is how I applied it.
From: Wolfgang Bail <[email protected]>
Date: Sat, 29 Sep 2012 23:49:26 -0300
Subject: [PATCH] [media] rc-msi-digivox-ii: Add full scan keycodes
The ir-rc from my MSI DigiVox mini II Version 3 (af9015) will not work since
kernel 3.2.x.
sudo ir-keytable -t shows:
1348890734.303273: event MSC: scancode = 317
1348890734.303280: event key down: KEY_POWER (0x0074)
1348890734.303282: event sync
1348890734.553961: event key up: KEY_POWER (0x0074)
1348890734.553963: event sync
1348890741.303451: event MSC: scancode = 30d
1348890741.303457: event key down: KEY_DOWN (0x006c)
1348890741.303459: event sync
1348890741.553956: event key up: KEY_DOWN (0x006c)
So I changed in rc-msi-digivox-ii.c { 0x0002, KEY_2 }, to { 0x0302, KEY_2 },
and so on. And now it works well.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
index c64e9e3..2fa71d0 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -22,24 +22,24 @@
#include <linux/module.h>
static struct rc_map_table msi_digivox_ii[] = {
- { 0x0002, KEY_2 },
- { 0x0003, KEY_UP }, /* up */
- { 0x0004, KEY_3 },
- { 0x0005, KEY_CHANNELDOWN },
- { 0x0008, KEY_5 },
- { 0x0009, KEY_0 },
- { 0x000b, KEY_8 },
- { 0x000d, KEY_DOWN }, /* down */
- { 0x0010, KEY_9 },
- { 0x0011, KEY_7 },
- { 0x0014, KEY_VOLUMEUP },
- { 0x0015, KEY_CHANNELUP },
- { 0x0016, KEY_OK },
- { 0x0017, KEY_POWER2 },
- { 0x001a, KEY_1 },
- { 0x001c, KEY_4 },
- { 0x001d, KEY_6 },
- { 0x001f, KEY_VOLUMEDOWN },
+ { 0x0302, KEY_2 },
+ { 0x0303, KEY_UP }, /* up */
+ { 0x0304, KEY_3 },
+ { 0x0305, KEY_CHANNELDOWN },
+ { 0x0308, KEY_5 },
+ { 0x0309, KEY_0 },
+ { 0x030b, KEY_8 },
+ { 0x030d, KEY_DOWN }, /* down */
+ { 0x0310, KEY_9 },
+ { 0x0311, KEY_7 },
+ { 0x0314, KEY_VOLUMEUP },
+ { 0x0315, KEY_CHANNELUP },
+ { 0x0316, KEY_OK },
+ { 0x0317, KEY_POWER2 },
+ { 0x031a, KEY_1 },
+ { 0x031c, KEY_4 },
+ { 0x031d, KEY_6 },
+ { 0x031f, KEY_VOLUMEDOWN },
};
static struct rc_map_list msi_digivox_ii_map = {
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
