Em 16-08-2012 23:03, Antti Palosaari escreveu:
> Common routine for use of dvb-core, demodulator and tuner for check
> given DVB-T2 parameters correctness.
> 
> Signed-off-by: Antti Palosaari <cr...@iki.fi>
> ---
>  drivers/media/dvb-core/dvb_frontend.c | 118 
> ++++++++++++++++++++++++++++++++++
>  drivers/media/dvb-core/dvb_frontend.h |   1 +
>  2 files changed, 119 insertions(+)
> 
> diff --git a/drivers/media/dvb-core/dvb_frontend.c 
> b/drivers/media/dvb-core/dvb_frontend.c
> index 4abb648..6413c74 100644
> --- a/drivers/media/dvb-core/dvb_frontend.c
> +++ b/drivers/media/dvb-core/dvb_frontend.c
> @@ -2641,6 +2641,124 @@ int dvb_validate_params_dvbt(struct dvb_frontend *fe)
>  }
>  EXPORT_SYMBOL(dvb_validate_params_dvbt);
>  
> +int dvb_validate_params_dvbt2(struct dvb_frontend *fe)
> +{
> +     struct dtv_frontend_properties *c = &fe->dtv_property_cache;
> +
> +     dev_dbg(fe->dvb->device, "%s:\n", __func__);
> +
> +     switch (c->delivery_system) {
> +     case SYS_DVBT2:
> +             break;
> +     default:
> +             dev_dbg(fe->dvb->device, "%s: delivery_system=%d\n", __func__,
> +                             c->delivery_system);
> +             return -EINVAL;
> +     }

Same comments made on patch 1/4 apply here.

> +
> +     /*
> +      * DVB-T2 specification as such does not specify any frequency bands.
> +      * Define real life limits still. L-Band 1452 - 1492 MHz may exits in
> +      * future too.
> +      */
> +     if (c->frequency >= 174000000 && c->frequency <= 230000000) {
> +             ;
> +     } else if (c->frequency >= 470000000 && c->frequency <= 862000000) {
> +             ;
> +     } else {
> +             dev_dbg(fe->dvb->device, "%s: frequency=%d\n", __func__,
> +                             c->frequency);
> +             return -EINVAL;
> +     }

Same comments made on patch 1/4 apply here.

> +
> +     switch (c->bandwidth_hz) {
> +     case  6000000:
> +     case  7000000:
> +     case  8000000:
> +     case  1700000:
> +     case  5000000:
> +     case 10000000:
> +             break;

0 is also valid. Also, better to sort the entries here.

> +     default:
> +             dev_dbg(fe->dvb->device, "%s: bandwidth_hz=%d\n", __func__,
> +                             c->bandwidth_hz);
> +             return -EINVAL;
> +     }
> +
> +     /*
> +      * Valid Physical Layer Pipe (PLP) values are 0 - 255
> +      */
> +     if (c->dvbt2_plp_id <= 255) {
> +             ;
> +     } else {
> +             dev_dbg(fe->dvb->device, "%s: dvbt2_plp_id=%d\n", __func__,
> +                             c->dvbt2_plp_id);
> +             return -EINVAL;
> +     }

Is it possible to disable it for DVB-T2? If so, a new value
is needed here (~0), according with our discussions related to
multistream patches.

> +
> +     switch (c->transmission_mode) {
> +     case TRANSMISSION_MODE_AUTO:
> +     case TRANSMISSION_MODE_2K:
> +     case TRANSMISSION_MODE_8K:
> +     case TRANSMISSION_MODE_1K:
> +     case TRANSMISSION_MODE_4K:
> +     case TRANSMISSION_MODE_16K:
> +     case TRANSMISSION_MODE_32K:
> +             break;
> +     default:
> +             dev_dbg(fe->dvb->device, "%s: transmission_mode=%d\n", __func__,
> +                             c->transmission_mode);
> +             return -EINVAL;
> +     }
> +
> +     switch (c->modulation) {
> +     case QAM_AUTO:
> +     case QPSK:
> +     case QAM_16:
> +     case QAM_64:
> +     case QAM_256:
> +             break;
> +     default:
> +             dev_dbg(fe->dvb->device, "%s: modulation=%d\n", __func__,
> +                             c->modulation);
> +             return -EINVAL;
> +     }
> +
> +     switch (c->guard_interval) {
> +     case GUARD_INTERVAL_AUTO:
> +     case GUARD_INTERVAL_1_32:
> +     case GUARD_INTERVAL_1_16:
> +     case GUARD_INTERVAL_1_8:
> +     case GUARD_INTERVAL_1_4:
> +     case GUARD_INTERVAL_1_128:
> +     case GUARD_INTERVAL_19_128:
> +     case GUARD_INTERVAL_19_256:
> +             break;
> +     default:
> +             dev_dbg(fe->dvb->device, "%s: guard_interval=%d\n", __func__,
> +                             c->guard_interval);
> +             return -EINVAL;
> +     }
> +
> +     switch (c->fec_inner) {
> +     case FEC_AUTO:
> +     case FEC_1_2:
> +     case FEC_3_5:
> +     case FEC_2_3:
> +     case FEC_3_4:
> +     case FEC_4_5:
> +     case FEC_5_6:
> +             break;
> +     default:
> +             dev_dbg(fe->dvb->device, "%s: fec_inner=%d\n", __func__,
> +                             c->fec_inner);
> +             return -EINVAL;
> +     }
> +
> +     return 0;
> +}
> +EXPORT_SYMBOL(dvb_validate_params_dvbt2);

Same comments made on patch 1/4 apply here.

> +
>  int dvb_register_frontend(struct dvb_adapter* dvb,
>                         struct dvb_frontend* fe)
>  {
> diff --git a/drivers/media/dvb-core/dvb_frontend.h 
> b/drivers/media/dvb-core/dvb_frontend.h
> index 6df0c44..bcd572d 100644
> --- a/drivers/media/dvb-core/dvb_frontend.h
> +++ b/drivers/media/dvb-core/dvb_frontend.h
> @@ -426,5 +426,6 @@ extern void dvb_frontend_sleep_until(struct timeval 
> *waketime, u32 add_usec);
>  extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval 
> curtime);
>  
>  extern int dvb_validate_params_dvbt(struct dvb_frontend *fe);
> +extern int dvb_validate_params_dvbt2(struct dvb_frontend *fe);
>  
>  #endif
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to