Currently there are two different commands: the old command which takes
4 parameters, and a newer one with just takes 2 parameters.
The driver shows an error in dmesg When using the old command with a new
firmware. Unfortunately this happens every time when chaning the
frequency (on DVB-C).
This patch simply makes configurable, whether the old or the new command
will be used.
All existing drxk_config instances using the "drxk_a3.mc" are updated to
make sure that these won't break (as this is the only firmware that uses
the old command).
I also removed a few lines of duplicated code.
Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
drivers/media/dvb/ddbridge/ddbridge-core.c | 1 +
drivers/media/dvb/frontends/drxk.h | 6 +++-
drivers/media/dvb/frontends/drxk_hard.c | 44 ++++++++++++++++++------------
drivers/media/dvb/frontends/drxk_hard.h | 3 +-
drivers/media/dvb/ngene/ngene-cards.c | 1 +
5 files changed, 36 insertions(+), 19 deletions(-)
diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c
b/drivers/media/dvb/ddbridge/ddbridge-core.c
index 131b938..80985bb 100644
--- a/drivers/media/dvb/ddbridge/ddbridge-core.c
+++ b/drivers/media/dvb/ddbridge/ddbridge-core.c
@@ -578,6 +578,7 @@ static int demod_attach_drxk(struct ddb_input *input)
memset(&config, 0, sizeof(config));
config.microcode_name = "drxk_a3.mc";
+ config.old_qam_demod_cmd = true;
config.adr = 0x29 + (input->nr & 1);
fe = input->fe = dvb_attach(drxk_attach, &config, i2c);
diff --git a/drivers/media/dvb/frontends/drxk.h
b/drivers/media/dvb/frontends/drxk.h
index 9d64e4f..c718530 100644
--- a/drivers/media/dvb/frontends/drxk.h
+++ b/drivers/media/dvb/frontends/drxk.h
@@ -20,6 +20,9 @@
* means that 1=DVBC, 0 = DVBT. Zero means the opposite.
* @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
* @microcode_name: Name of the firmware file with the microcode
+ * @old_qam_demod_cmd: True if the firmware uses the old (4-parameter)
+ * version of the command to set the demodulator params.
+ * Only the initial firmware (drxk_a3.mc) use this.
*
* On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
* UIO-3.
@@ -38,7 +41,8 @@ struct drxk_config {
u8 mpeg_out_clk_strength;
int chunk_size;
- const char *microcode_name;
+ const char *microcode_name;
+ bool old_qam_demod_cmd;
};
#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \
diff --git a/drivers/media/dvb/frontends/drxk_hard.c
b/drivers/media/dvb/frontends/drxk_hard.c
index 60b868f..9b4d28c 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -5445,34 +5445,43 @@ static int SetQAM(struct drxk_state *state, u16
IntermediateFreqkHz,
}
if (status < 0)
goto error;
+
setParamParameters[0] = state->m_Constellation; /* modulation */
setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */
- if (state->m_OperationMode == OM_QAM_ITU_C)
- setParamParameters[2] = QAM_TOP_ANNEX_C;
- else
- setParamParameters[2] = QAM_TOP_ANNEX_A;
- setParamParameters[3] |= (QAM_MIRROR_AUTO_ON);
- /* Env parameters */
- /* check for LOCKRANGE Extented */
- /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */
- status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM |
SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult);
- if (status < 0) {
- /* Fall-back to the simpler call */
+ if (state->old_qam_demod_cmd) {
if (state->m_OperationMode == OM_QAM_ITU_C)
- setParamParameters[0] = QAM_TOP_ANNEX_C;
+ setParamParameters[2] = QAM_TOP_ANNEX_C;
else
- setParamParameters[0] = QAM_TOP_ANNEX_A;
- status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM |
SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setParamParameters, 1, &cmdResult);
+ setParamParameters[2] = QAM_TOP_ANNEX_A;
+ setParamParameters[3] |= (QAM_MIRROR_AUTO_ON);
+ /* Env parameters */
+ /* check for LOCKRANGE Extented */
+ /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */
+
+ status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM |
SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult);
+ } else {
+ u16 setEnvParameters[1];
+
+ if (state->m_OperationMode == OM_QAM_ITU_C)
+ setEnvParameters[0] = QAM_TOP_ANNEX_C;
+ else
+ setEnvParameters[0] = QAM_TOP_ANNEX_A;
+
+ status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM |
SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setEnvParameters, 1, &cmdResult);
if (status < 0)
goto error;
- setParamParameters[0] = state->m_Constellation; /* modulation
*/
- setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave
mode */
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM |
SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 2, setParamParameters, 1, &cmdResult);
}
- if (status < 0)
+
+ if (status < 0) {
+ dprintk(1, "Could not set demodulator parameters. Make "
+ "sure old_qam_demod_cmd (%d) is correct for your "
+ "firmware (%s).\n",
+ state->old_qam_demod_cmd, state->microcode_name);
goto error;
+ }
/*
* STEP 3: enable the system in a mode where the ADC provides valid
@@ -6385,6 +6394,7 @@ struct dvb_frontend *drxk_attach(const struct drxk_config
*config,
state->demod_address = adr;
state->single_master = config->single_master;
state->microcode_name = config->microcode_name;
+ state->old_qam_demod_cmd = config->old_qam_demod_cmd;
state->no_i2c_bridge = config->no_i2c_bridge;
state->antenna_gpio = config->antenna_gpio;
state->antenna_dvbt = config->antenna_dvbt;
diff --git a/drivers/media/dvb/frontends/drxk_hard.h
b/drivers/media/dvb/frontends/drxk_hard.h
index 4bbf841..9c84197 100644
--- a/drivers/media/dvb/frontends/drxk_hard.h
+++ b/drivers/media/dvb/frontends/drxk_hard.h
@@ -338,7 +338,8 @@ struct drxk_state {
bool antenna_dvbt;
u16 antenna_gpio;
- const char *microcode_name;
+ const char *microcode_name;
+ bool old_qam_demod_cmd;
};
#define NEVER_LOCK 0
diff --git a/drivers/media/dvb/ngene/ngene-cards.c
b/drivers/media/dvb/ngene/ngene-cards.c
index 7539a5d..ad45570 100644
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ b/drivers/media/dvb/ngene/ngene-cards.c
@@ -217,6 +217,7 @@ static int demod_attach_drxk(struct ngene_channel *chan,
memset(&config, 0, sizeof(config));
config.microcode_name = "drxk_a3.mc";
+ config.old_qam_demod_cmd = true;
config.adr = 0x29 + (chan->number ^ 2);
chan->fe = dvb_attach(drxk_attach, &config, i2c);
--
1.7.11.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
