The driver initializes all board related properties except the s_power()
callback to board code. The platforms that require this callback are not
supported by this driver yet for CONFIG_OF=y.
Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
.../bindings/camera/samsung-s5k6aafx.txt | 57 +++++++++
drivers/media/video/s5k6aa.c | 129 ++++++++++++++------
2 files changed, 146 insertions(+), 40 deletions(-)
create mode 100644
Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt
diff --git a/Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt
b/Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt
new file mode 100644
index 0000000..6685a9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/camera/samsung-s5k6aafx.txt
@@ -0,0 +1,57 @@
+Samsung S5K6AAFX camera sensor
+------------------------------
+
+Required properties:
+
+- compatible : "samsung,s5k6aafx";
+- reg : base address of the device on I2C bus;
+- video-itu-601-bus : parallel bus with HSYNC and VSYNC - ITU-R BT.601;
+- vdd_core-supply : digital core voltage supply 1.5V (1.4V to 1.6V);
+- vdda-supply : analog power voltage supply 2.8V (2.6V to 3.0V);
+- vdd_reg-supply : regulator input power voltage supply 1.8V (1.7V to 1.9V)
+ or 2.8V (2.6V to 3.0);
+- vddio-supply : I/O voltage supply 1.8V (1.65V to 1.95V)
+ or 2.8V (2.5V to 3.1V);
+
+Optional properties:
+
+- clock-frequency : the IP's main (system bus) clock frequency in Hz, the
default
+ value when this property is not specified is 24 MHz;
+- data-lanes : number of physical lanes used (default 2 if not specified);
+- gpio-stby : specifies the S5K6AA_STBY GPIO
+- gpio-rst : specifies the S5K6AA_RST GPIO
+- samsung,s5k6aa-inv-stby : set inverted S5K6AA_STBY GPIO level;
+- samsung,s5k6aa-inv-rst : set inverted S5K6AA_RST GPIO level;
+- samsung,s5k6aa-hflip : set the default horizontal image flipping;
+- samsung,s5k6aa-vflip : set the default vertical image flipping;
+
+
+Example:
+
+ gpl2: gpio-controller@0 {
+ };
+
+ reg0: regulator@0 {
+ };
+
+ reg1: regulator@1 {
+ };
+
+ reg2: regulator@2 {
+ };
+
+ reg3: regulator@3 {
+ };
+
+ s5k6aafx@3c {
+ compatible = "samsung,s5k6aafx";
+ reg = <0x3c>;
+ clock-frequency = <24000000>;
+ gpio-rst = <&gpl2 0 2 0 3>;
+ gpio-stby = <&gpl2 1 2 0 3>;
+ video-itu-601-bus;
+ vdd_core-supply = <®0>;
+ vdda-supply = <®1>;
+ vdd_reg-supply = <®2>;
+ vddio-supply = <®3>;
+ };
diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c
index 6625e46..ed172bb 100644
--- a/drivers/media/video/s5k6aa.c
+++ b/drivers/media/video/s5k6aa.c
@@ -20,6 +20,7 @@
#include <linux/i2c.h>
#include <linux/media.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
@@ -232,14 +233,14 @@ struct s5k6aa {
struct media_pad pad;
enum v4l2_mbus_type bus_type;
- u8 mipi_lanes;
+ u32 mipi_lanes;
int (*s_power)(int enable);
struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES];
struct s5k6aa_gpio gpio[GPIO_NUM];
/* external master clock frequency */
- unsigned long mclk_frequency;
+ u32 mclk_frequency;
/* ISP internal master clock frequency */
u16 clk_fop;
/* output pixel clock frequency range */
@@ -1519,68 +1520,109 @@ static void s5k6aa_free_gpios(struct s5k6aa *s5k6aa)
}
}
-static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
- const struct s5k6aa_platform_data *pdata)
+static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa, struct device *dev)
{
- const struct s5k6aa_gpio *gpio = &pdata->gpio_stby;
+ const struct s5k6aa_platform_data *pdata = dev->platform_data;
+ struct device_node *np = dev->of_node;
+ const struct s5k6aa_gpio *pgpio;
+ struct s5k6aa_gpio gpio = { 0 };
int ret;
s5k6aa->gpio[STBY].gpio = -EINVAL;
s5k6aa->gpio[RST].gpio = -EINVAL;
- ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_STBY");
+ if (np) {
+ gpio.gpio = of_get_named_gpio(np, "gpio-stby", 0);
+ if (!of_get_property(np, "samsung,s5k6aa-inv-stby", NULL))
+ gpio.level = 1;
+ }
+ pgpio = np ? &gpio : &pdata->gpio_stby;
+ ret = s5k6aa_configure_gpio(pgpio->gpio, pgpio->level, "S5K6AA_STBY");
if (ret) {
s5k6aa_free_gpios(s5k6aa);
return ret;
}
- s5k6aa->gpio[STBY] = *gpio;
- if (gpio_is_valid(gpio->gpio))
- gpio_set_value(gpio->gpio, 0);
+ s5k6aa->gpio[STBY] = *pgpio;
- gpio = &pdata->gpio_reset;
- ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_RST");
- if (ret) {
- s5k6aa_free_gpios(s5k6aa);
- return ret;
+ if (np) {
+ gpio.gpio = of_get_named_gpio(np, "gpio-rst", 0);
+ if (!of_get_property(np, "samsung,s5k6aa-inv-rst", NULL))
+ gpio.level = 1;
+ }
+ pgpio = np ? &gpio : &pdata->gpio_reset;
+ ret = s5k6aa_configure_gpio(pgpio->gpio, pgpio->level, "S5K6AA_RST");
+ if (ret)
+ goto err;
+
+ s5k6aa->gpio[RST] = *pgpio;
+ return 0;
+ err:
+ s5k6aa_free_gpios(s5k6aa);
+ return ret;
+}
+
+static int s5k6aa_get_platform_data(struct s5k6aa *s5k6aa,
+ struct i2c_client *client)
+{
+ const struct s5k6aa_platform_data *pdata = client->dev.platform_data;
+ struct device_node *np = client->dev.of_node;
+ const char *bus_type;
+
+ if (np == NULL) {
+ if (pdata == NULL) {
+ dev_err(&client->dev, "Platform data not specified\n");
+ return -EINVAL;
+ }
+ s5k6aa->mclk_frequency = pdata->mclk_frequency;
+ s5k6aa->bus_type = pdata->bus_type;
+ s5k6aa->mipi_lanes = pdata->nlanes;
+ s5k6aa->s_power = pdata->set_power;
+ s5k6aa->inv_hflip = pdata->horiz_flip;
+ s5k6aa->inv_vflip = pdata->vert_flip;
+ return 0;
}
- s5k6aa->gpio[RST] = *gpio;
- if (gpio_is_valid(gpio->gpio))
- gpio_set_value(gpio->gpio, 0);
+ if (of_property_read_u32(np, "clock-frequency",
+ &s5k6aa->mclk_frequency))
+ s5k6aa->mclk_frequency = 24000000UL;
+
+ if (of_property_read_u32(np, "data-lanes", &s5k6aa->mipi_lanes))
+ s5k6aa->mipi_lanes = 2;
+
+ if (!of_property_read_string(np, "video-bus-type", &bus_type) &&
+ !strcmp(bus_type, "mipi-csi2"))
+ s5k6aa->bus_type = V4L2_MBUS_CSI2;
+ else
+ s5k6aa->bus_type = V4L2_MBUS_PARALLEL;
+
+ s5k6aa->inv_hflip = of_property_read_bool(np, "samsung,s5k6aa-hflip");
+ s5k6aa->inv_vflip = of_property_read_bool(np, "samsung,s5k6aa-vflip");
return 0;
}
+
static int s5k6aa_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct s5k6aa_platform_data *pdata = client->dev.platform_data;
struct v4l2_subdev *sd;
struct s5k6aa *s5k6aa;
- int i, ret;
+ int i, ret = -EINVAL;
- if (pdata == NULL) {
- dev_err(&client->dev, "Platform data not specified\n");
- return -EINVAL;
- }
+ s5k6aa = devm_kzalloc(&client->dev, sizeof(*s5k6aa), GFP_KERNEL);
+ if (!s5k6aa)
+ return -ENOMEM;
- if (pdata->mclk_frequency == 0) {
+ ret = s5k6aa_get_platform_data(s5k6aa, client);
+ if (ret < 0)
+ return ret;
+
+ if (s5k6aa->mclk_frequency == 0) {
dev_err(&client->dev, "MCLK frequency not specified\n");
return -EINVAL;
}
- s5k6aa = kzalloc(sizeof(*s5k6aa), GFP_KERNEL);
- if (!s5k6aa)
- return -ENOMEM;
-
mutex_init(&s5k6aa->lock);
- s5k6aa->mclk_frequency = pdata->mclk_frequency;
- s5k6aa->bus_type = pdata->bus_type;
- s5k6aa->mipi_lanes = pdata->nlanes;
- s5k6aa->s_power = pdata->set_power;
- s5k6aa->inv_hflip = pdata->horiz_flip;
- s5k6aa->inv_vflip = pdata->vert_flip;
-
sd = &s5k6aa->sd;
v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops);
strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
@@ -1592,9 +1634,9 @@ static int s5k6aa_probe(struct i2c_client *client,
sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0);
if (ret)
- goto out_err1;
+ return ret;
- ret = s5k6aa_configure_gpios(s5k6aa, pdata);
+ ret = s5k6aa_configure_gpios(s5k6aa, &client->dev);
if (ret)
goto out_err2;
@@ -1627,8 +1669,6 @@ out_err3:
s5k6aa_free_gpios(s5k6aa);
out_err2:
media_entity_cleanup(&s5k6aa->sd.entity);
-out_err1:
- kfree(s5k6aa);
return ret;
}
@@ -1642,7 +1682,6 @@ static int s5k6aa_remove(struct i2c_client *client)
media_entity_cleanup(&sd->entity);
regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
s5k6aa_free_gpios(s5k6aa);
- kfree(s5k6aa);
return 0;
}
@@ -1653,9 +1692,18 @@ static const struct i2c_device_id s5k6aa_id[] = {
};
MODULE_DEVICE_TABLE(i2c, s5k6aa_id);
+#ifdef CONFIG_OF
+static const struct of_device_id s5k6aa_of_match[] __devinitconst = {
+ { .compatible = "samsung,s5k6aafx" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, s5k6aa_of_match);
+#endif
+
static struct i2c_driver s5k6aa_i2c_driver = {
.driver = {
+ .of_match_table = of_match_ptr(s5k6aa_of_match),
.name = DRIVER_NAME
},
.probe = s5k6aa_probe,
@@ -1665,6 +1713,7 @@ static struct i2c_driver s5k6aa_i2c_driver = {
module_i2c_driver(s5k6aa_i2c_driver);
+MODULE_ALIAS("i2c:s5k6aafx");
MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver");
MODULE_AUTHOR("Sylwester Nawrocki <s.nawro...@samsung.com>");
MODULE_LICENSE("GPL");
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
