On 06.05.2012 19:29, Hans-Frieder Vogt wrote:
> Thomas,
>
> in your patch for the RTL28xxu you introduce a tuner callback (see below).
> You
> called the command FC0012_FE_CALLBACK_UHF_ENABLE.
> Since the argument is currently defined to be true if the frequency is below
> 300MHz, i.e. the argument is true if the frequency is a VHF frequency.
> Therefore I would rather recommend to call the command
> ..._FE_CALLBACK_VHF_ENABLE.
> What do you think?
Yes. I changed that 5 times. That is why it ended up wrong.
I am currently resolving your issues and will rename it too in other patches.
> I am just about to send out a patch for the fc0013 tuner, and since this
> tuner
> has a lot in common with the fc0012, I intend to put the callback definition
> into a separate fc001x-common.h header. I just like to know if you have any
> objections me renaming the callback command.
>
> Cheers,
> Hans-Frieder
>
>> +
>> +
>> +static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
>> + int cmd, int arg)
>> +{
>> + int ret;
>> + u8 val;
>> +
>> + deb_info("%s cmd=%d arg=%d", __func__, cmd, arg);
>> + switch (cmd) {
>> + case FC0012_FE_CALLBACK_UHF_ENABLE:
>> + /* set output values */
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
>> + if (ret)
>> + goto err;
>> +
>> + val &= 0xbf;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
>> + if (ret)
>> + goto err;
>> +
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x40;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
>> + if (ret)
>> + goto err;
>> +
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
>> + if (ret)
>> + goto err;
>> +
>> + if (arg)
>> + val &= 0xbf; /* set GPIO6 low */
>> + else
>> + val |= 0x40; /* set GPIO6 high */
>> +
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
>> + if (ret)
>> + goto err;
>> + break;
>> + default:
>> + ret = -EINVAL;
>> + goto err;
>> + }
>> + return 0;
>> +
>> +err:
>> + err("%s: failed=%d", __func__, ret);
>> +
>> return ret;
>> }
>>
>
> Hans-Frieder Vogt e-mail: hfvogt <at> gmx .dot. net
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
