On Mon, Feb 20, 2012 at 04:17:39PM +0100, Guennadi Liakhovetski wrote:
> From: Sascha Hauer <s.ha...@pengutronix.de>
> 
> The i.MX27 DMA support was introduced with the initial commit of this
> driver and originally created by me. However, I never got this stable
> due to the racy DMA engine and used the EMMA engine instead. As the DMA
> support is most probably unused and broken in its current state, remove
> it. EMMA becomes the only supported mode on i.MX27.
> 
> This also helps us get rid of another user of the legacy i.MX DMA
> support and remove the dependency on ARCH_MX* macros as these are
> scheduled for removal.
> 
> Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
> [g.liakhovet...@gmx.de: remove unused goto]
> Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> ---
> 
> Sascha, I'd prefer to merge your two mx2_camera patches and additionally 
> slightly improve it by removing a dangling goto. Please confirm, that 
> you're ok with this version.
> 

Looks good.

Acked-by: Sascha Hauer <s.ha...@pengutronix.de>

> Thanks
> Guennadi
> 
>  drivers/media/video/mx2_camera.c |  245 ++++---------------------------------
>  1 files changed, 27 insertions(+), 218 deletions(-)
> 
> diff --git a/drivers/media/video/mx2_camera.c 
> b/drivers/media/video/mx2_camera.c
> index 04aab0c..f771f53 100644
> --- a/drivers/media/video/mx2_camera.c
> +++ b/drivers/media/video/mx2_camera.c
> @@ -38,9 +38,6 @@
>  #include <linux/videodev2.h>
>  
>  #include <mach/mx2_cam.h>
> -#ifdef CONFIG_MACH_MX27
> -#include <mach/dma-mx1-mx2.h>
> -#endif
>  #include <mach/hardware.h>
>  
>  #include <asm/dma.h>
> @@ -206,8 +203,6 @@
>  #define PRP_INTR_LBOVF               (1 << 7)
>  #define PRP_INTR_CH2OVF              (1 << 8)
>  
> -#define mx27_camera_emma(pcdev)      (cpu_is_mx27() && pcdev->use_emma)
> -
>  #define MAX_VIDEO_MEM        16
>  
>  struct mx2_prp_cfg {
> @@ -250,8 +245,6 @@ struct mx2_camera_dev {
>       struct mx2_buffer       *fb1_active;
>       struct mx2_buffer       *fb2_active;
>  
> -     int                     use_emma;
> -
>       u32                     csicr1;
>  
>       void                    *discard_buffer;
> @@ -330,7 +323,7 @@ static void mx2_camera_deactivate(struct mx2_camera_dev 
> *pcdev)
>  
>       clk_disable(pcdev->clk_csi);
>       writel(0, pcdev->base_csi + CSICR1);
> -     if (mx27_camera_emma(pcdev)) {
> +     if (cpu_is_mx27()) {
>               writel(0, pcdev->base_emma + PRP_CNTL);
>       } else if (cpu_is_mx25()) {
>               spin_lock_irqsave(&pcdev->lock, flags);
> @@ -362,7 +355,7 @@ static int mx2_camera_add_device(struct soc_camera_device 
> *icd)
>  
>       csicr1 = CSICR1_MCLKEN;
>  
> -     if (mx27_camera_emma(pcdev)) {
> +     if (cpu_is_mx27()) {
>               csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
>                       CSICR1_RXFF_LEVEL(0);
>       } else if (cpu_is_mx27())
> @@ -402,42 +395,6 @@ static void mx2_camera_remove_device(struct 
> soc_camera_device *icd)
>       pcdev->icd = NULL;
>  }
>  
> -#ifdef CONFIG_MACH_MX27
> -static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev)
> -{
> -     u32 tmp;
> -
> -     imx_dma_enable(pcdev->dma);
> -
> -     tmp = readl(pcdev->base_csi + CSICR1);
> -     tmp |= CSICR1_RF_OR_INTEN;
> -     writel(tmp, pcdev->base_csi + CSICR1);
> -}
> -
> -static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
> -{
> -     struct mx2_camera_dev *pcdev = data;
> -     u32 status = readl(pcdev->base_csi + CSISR);
> -
> -     if (status & CSISR_SOF_INT && pcdev->active) {
> -             u32 tmp;
> -
> -             tmp = readl(pcdev->base_csi + CSICR1);
> -             writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1);
> -             mx27_camera_dma_enable(pcdev);
> -     }
> -
> -     writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR);
> -
> -     return IRQ_HANDLED;
> -}
> -#else
> -static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
> -{
> -     return IRQ_NONE;
> -}
> -#endif /* CONFIG_MACH_MX27 */
> -
>  static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
>               int state)
>  {
> @@ -617,28 +574,7 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq,
>       vb->state = VIDEOBUF_QUEUED;
>       list_add_tail(&vb->queue, &pcdev->capture);
>  
> -     if (mx27_camera_emma(pcdev)) {
> -             goto out;
> -#ifdef CONFIG_MACH_MX27
> -     } else if (cpu_is_mx27()) {
> -             int ret;
> -
> -             if (pcdev->active == NULL) {
> -                     ret = imx_dma_setup_single(pcdev->dma,
> -                                     videobuf_to_dma_contig(vb), vb->size,
> -                                     (u32)pcdev->base_dma + 0x10,
> -                                     DMA_MODE_READ);
> -                     if (ret) {
> -                             vb->state = VIDEOBUF_ERROR;
> -                             wake_up(&vb->done);
> -                             goto out;
> -                     }
> -
> -                     vb->state = VIDEOBUF_ACTIVE;
> -                     pcdev->active = buf;
> -             }
> -#endif
> -     } else { /* cpu_is_mx25() */
> +     if (cpu_is_mx25()) {
>               u32 csicr3, dma_inten = 0;
>  
>               if (pcdev->fb1_active == NULL) {
> @@ -674,7 +610,6 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq,
>               }
>       }
>  
> -out:
>       spin_unlock_irqrestore(&pcdev->lock, flags);
>  }
>  
> @@ -939,7 +874,7 @@ static int mx2_camera_set_bus_param(struct 
> soc_camera_device *icd)
>       if (bytesperline < 0)
>               return bytesperline;
>  
> -     if (mx27_camera_emma(pcdev)) {
> +     if (cpu_is_mx27()) {
>               ret = mx27_camera_emma_prp_reset(pcdev);
>               if (ret)
>                       return ret;
> @@ -1089,7 +1024,7 @@ static int mx2_camera_set_fmt(struct soc_camera_device 
> *icd,
>       pix->colorspace         = mf.colorspace;
>       icd->current_fmt        = xlate;
>  
> -     if (mx27_camera_emma(pcdev))
> +     if (cpu_is_mx27())
>               pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code,
>                                               xlate->host_fmt->fourcc);
>  
> @@ -1201,117 +1136,6 @@ static int mx2_camera_reqbufs(struct 
> soc_camera_device *icd,
>       return 0;
>  }
>  
> -#ifdef CONFIG_MACH_MX27
> -static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state)
> -{
> -     struct videobuf_buffer *vb;
> -     struct mx2_buffer *buf;
> -     unsigned long flags;
> -     int ret;
> -
> -     spin_lock_irqsave(&pcdev->lock, flags);
> -
> -     if (!pcdev->active) {
> -             dev_err(pcdev->dev, "%s called with no active buffer!\n",
> -                             __func__);
> -             goto out;
> -     }
> -
> -     vb = &pcdev->active->vb;
> -     buf = container_of(vb, struct mx2_buffer, vb);
> -     WARN_ON(list_empty(&vb->queue));
> -     dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
> -             vb, vb->baddr, vb->bsize);
> -
> -     /* _init is used to debug races, see comment in pxa_camera_reqbufs() */
> -     list_del_init(&vb->queue);
> -     vb->state = state;
> -     do_gettimeofday(&vb->ts);
> -     vb->field_count++;
> -
> -     wake_up(&vb->done);
> -
> -     if (list_empty(&pcdev->capture)) {
> -             pcdev->active = NULL;
> -             goto out;
> -     }
> -
> -     pcdev->active = list_entry(pcdev->capture.next,
> -                     struct mx2_buffer, vb.queue);
> -
> -     vb = &pcdev->active->vb;
> -     vb->state = VIDEOBUF_ACTIVE;
> -
> -     ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb),
> -                     vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ);
> -
> -     if (ret) {
> -             vb->state = VIDEOBUF_ERROR;
> -             pcdev->active = NULL;
> -             wake_up(&vb->done);
> -     }
> -
> -out:
> -     spin_unlock_irqrestore(&pcdev->lock, flags);
> -}
> -
> -static void mx27_camera_dma_err_callback(int channel, void *data, int err)
> -{
> -     struct mx2_camera_dev *pcdev = data;
> -
> -     mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR);
> -}
> -
> -static void mx27_camera_dma_callback(int channel, void *data)
> -{
> -     struct mx2_camera_dev *pcdev = data;
> -
> -     mx27_camera_frame_done(pcdev, VIDEOBUF_DONE);
> -}
> -
> -#define DMA_REQ_CSI_RX          31 /* FIXME: Add this to a resource */
> -
> -static int __devinit mx27_camera_dma_init(struct platform_device *pdev,
> -             struct mx2_camera_dev *pcdev)
> -{
> -     int err;
> -
> -     pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH);
> -     if (pcdev->dma < 0) {
> -             dev_err(&pdev->dev, "%s failed to request DMA channel\n",
> -                             __func__);
> -             return pcdev->dma;
> -     }
> -
> -     err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback,
> -                                     mx27_camera_dma_err_callback, pcdev);
> -     if (err) {
> -             dev_err(&pdev->dev, "%s failed to set DMA callback\n",
> -                             __func__);
> -             goto err_out;
> -     }
> -
> -     err = imx_dma_config_channel(pcdev->dma,
> -                     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
> -                     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
> -                     DMA_REQ_CSI_RX, 1);
> -     if (err) {
> -             dev_err(&pdev->dev, "%s failed to config DMA channel\n",
> -                             __func__);
> -             goto err_out;
> -     }
> -
> -     imx_dma_config_burstlen(pcdev->dma, 64);
> -
> -     return 0;
> -
> -err_out:
> -     imx_dma_free(pcdev->dma);
> -
> -     return err;
> -}
> -#endif /* CONFIG_MACH_MX27 */
> -
>  static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
>  {
>       struct soc_camera_device *icd = file->private_data;
> @@ -1527,8 +1351,6 @@ static int __devinit mx2_camera_probe(struct 
> platform_device *pdev)
>       struct resource *res_csi, *res_emma;
>       void __iomem *base_csi;
>       int irq_csi, irq_emma;
> -     irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq
> -             : mx27_camera_irq;
>       int err = 0;
>  
>       dev_dbg(&pdev->dev, "initialising\n");
> @@ -1557,15 +1379,6 @@ static int __devinit mx2_camera_probe(struct 
> platform_device *pdev)
>       dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n",
>                       clk_get_rate(pcdev->clk_csi));
>  
> -     /* Initialize DMA */
> -#ifdef CONFIG_MACH_MX27
> -     if (cpu_is_mx27()) {
> -             err = mx27_camera_dma_init(pdev, pcdev);
> -             if (err)
> -                     goto exit_clk_put;
> -     }
> -#endif /* CONFIG_MACH_MX27 */
> -
>       pcdev->res_csi = res_csi;
>       pcdev->pdata = pdev->dev.platform_data;
>       if (pcdev->pdata) {
> @@ -1606,11 +1419,13 @@ static int __devinit mx2_camera_probe(struct 
> platform_device *pdev)
>       pcdev->base_dma = res_csi->start;
>       pcdev->dev = &pdev->dev;
>  
> -     err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0,
> -                     MX2_CAM_DRV_NAME, pcdev);
> -     if (err) {
> -             dev_err(pcdev->dev, "Camera interrupt register failed \n");
> -             goto exit_iounmap;
> +     if (cpu_is_mx25()) {
> +             err = request_irq(pcdev->irq_csi, mx25_camera_irq, 0,
> +                             MX2_CAM_DRV_NAME, pcdev);
> +             if (err) {
> +                     dev_err(pcdev->dev, "Camera interrupt register failed 
> \n");
> +                     goto exit_iounmap;
> +             }
>       }
>  
>       if (cpu_is_mx27()) {
> @@ -1618,14 +1433,15 @@ static int __devinit mx2_camera_probe(struct 
> platform_device *pdev)
>               res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>               irq_emma = platform_get_irq(pdev, 1);
>  
> -             if (res_emma && irq_emma >= 0) {
> -                     dev_info(&pdev->dev, "Using EMMA\n");
> -                     pcdev->use_emma = 1;
> -                     pcdev->res_emma = res_emma;
> -                     pcdev->irq_emma = irq_emma;
> -                     if (mx27_camera_emma_init(pcdev))
> -                             goto exit_free_irq;
> +             if (!res_emma || !irq_emma) {
> +                     dev_err(&pdev->dev, "no EMMA resources\n");
> +                     goto exit_free_irq;
>               }
> +
> +             pcdev->res_emma = res_emma;
> +             pcdev->irq_emma = irq_emma;
> +             if (mx27_camera_emma_init(pcdev))
> +                     goto exit_free_irq;
>       }
>  
>       pcdev->soc_host.drv_name        = MX2_CAM_DRV_NAME,
> @@ -1643,26 +1459,22 @@ static int __devinit mx2_camera_probe(struct 
> platform_device *pdev)
>       return 0;
>  
>  exit_free_emma:
> -     if (mx27_camera_emma(pcdev)) {
> +     if (cpu_is_mx27()) {
>               free_irq(pcdev->irq_emma, pcdev);
>               clk_disable(pcdev->clk_emma);
>               clk_put(pcdev->clk_emma);
>               iounmap(pcdev->base_emma);
> -             release_mem_region(res_emma->start, resource_size(res_emma));
> +             release_mem_region(pcdev->res_emma->start, 
> resource_size(pcdev->res_emma));
>       }
>  exit_free_irq:
> -     free_irq(pcdev->irq_csi, pcdev);
> +     if (cpu_is_mx25())
> +             free_irq(pcdev->irq_csi, pcdev);
>  exit_iounmap:
>       iounmap(base_csi);
>  exit_release:
>       release_mem_region(res_csi->start, resource_size(res_csi));
>  exit_dma_free:
> -#ifdef CONFIG_MACH_MX27
> -     if (cpu_is_mx27())
> -             imx_dma_free(pcdev->dma);
> -exit_clk_put:
>       clk_put(pcdev->clk_csi);
> -#endif /* CONFIG_MACH_MX27 */
>  exit_kfree:
>       kfree(pcdev);
>  exit:
> @@ -1677,19 +1489,16 @@ static int __devexit mx2_camera_remove(struct 
> platform_device *pdev)
>       struct resource *res;
>  
>       clk_put(pcdev->clk_csi);
> -#ifdef CONFIG_MACH_MX27
> +     if (cpu_is_mx25())
> +             free_irq(pcdev->irq_csi, pcdev);
>       if (cpu_is_mx27())
> -             imx_dma_free(pcdev->dma);
> -#endif /* CONFIG_MACH_MX27 */
> -     free_irq(pcdev->irq_csi, pcdev);
> -     if (mx27_camera_emma(pcdev))
>               free_irq(pcdev->irq_emma, pcdev);
>  
>       soc_camera_host_unregister(&pcdev->soc_host);
>  
>       iounmap(pcdev->base_csi);
>  
> -     if (mx27_camera_emma(pcdev)) {
> +     if (cpu_is_mx27()) {
>               clk_disable(pcdev->clk_emma);
>               clk_put(pcdev->clk_emma);
>               iounmap(pcdev->base_emma);
> -- 
> 1.7.2.5
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to