stb0899_read_signal_strength() adds an offset to the result of the table lookup.
That offset must correspond to the lowest value in the lookup table, to make
sure
the result doesn't get below 0, which would mean a "very high" value since the
parameter is unsigned.
'strength' and 'snr' need to be initialized to 0 to make sure they have a
defined result in case there is no "internal->lock".
Signed-off-by: Klaus Schmidinger <klaus.schmidin...@tvdr.de>
--- a/linux/drivers/media/dvb/frontends/stb0899_drv.c 2011-06-11
16:54:32.000000000 +0200
+++ b/linux/drivers/media/dvb/frontends/stb0899_drv.c 2011-06-11
16:23:00.000000000 +0200
@@ -67,7 +67,7 @@
* Crude linear extrapolation below -84.8dBm and above -8.0dBm.
*/
static const struct stb0899_tab stb0899_dvbsrf_tab[] = {
- { -950, -128 },
+ { -750, -128 },
{ -748, -94 },
{ -745, -92 },
{ -735, -90 },
@@ -131,7 +131,7 @@
{ -730, 13645 },
{ -750, 13909 },
{ -766, 14153 },
- { -999, 16383 }
+ { -950, 16383 }
};
/* DVB-S2 Es/N0 quant in dB/100 vs read value * 100*/
@@ -964,6 +964,7 @@
int val;
u32 reg;
+ *strength = 0;
switch (state->delsys) {
case SYS_DVBS:
case SYS_DSS:
@@ -987,7 +988,7 @@
val = STB0899_GETFIELD(IF_AGC_GAIN, reg);
*strength = stb0899_table_lookup(stb0899_dvbs2rf_tab,
ARRAY_SIZE(stb0899_dvbs2rf_tab) - 1, val);
- *strength += 750;
+ *strength += 950;
dprintk(state->verbose, FE_DEBUG, 1, "IF_AGC_GAIN = 0x%04x,
C = %d * 0.1 dBm",
val & 0x3fff, *strength);
}
@@ -1009,6 +1010,7 @@
u8 buf[2];
u32 reg;
+ *snr = 0;
reg = stb0899_read_reg(state, STB0899_VSTATUS);
switch (state->delsys) {
case SYS_DVBS:
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
