On Thu, Oct 13, 2011 at 7:06 PM, Benjamin Larsson <benja...@southpole.se> wrote: > On 10/13/2011 07:48 PM, Devin Heitmueller wrote: >> On Thu, Oct 13, 2011 at 12:19 PM, Antti Palosaari <cr...@iki.fi> wrote: >>>> You were close: em2884, drx-k, xc5000, and for analog it uses the >>>> afv4910b. >>> Then it should be peace of cake at least for digital side. >> I don't think we've ever done xc5000 on an em28xx before, so it's >> entirely possible that the xc5000 clock stretching will expose bugs in >> the em28xx i2c implementation (it uncovered bugs in essentially every >> other bridge driver I did work on). >> >> That, and we don't know how much is hard-coded into the drx-k driver >> making it specific to the couple of device it's currently being used >> with. >> >> But yeah, it shouldn't be rocket science. I added support for the >> board in my OSX driver and it only took me a couple of hours. >> >> Devin >> > > Eddi De Pieri has patches for the HVR-930C that works somewhat. The > hardware in that stick is the same. > > MvH > Benjamin Larsson
While the basic chips used are different, they are completely different hardware designs and likely have different GPIO configurations as well as IF specs. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
