Em 03-10-2011 04:11, Javier Martinez Canillas escreveu:
> On Mon, Oct 3, 2011 at 8:30 AM, Hans Verkuil <hverk...@xs4all.nl> wrote:
>> On Monday, October 03, 2011 04:17:06 Mauro Carvalho Chehab wrote:
>>> Em 02-10-2011 18:18, Javier Martinez Canillas escreveu:
>>>>
>>>> Yes, I'll change that.
>>>>
>>>>>> static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
>>>>>> .s_routing = tvp5150_s_routing,
>>>>>> + .s_stream = tvp515x_s_stream,
>>>>>> + .enum_mbus_fmt = tvp515x_enum_mbus_fmt,
>>>>>> + .g_mbus_fmt = tvp515x_mbus_fmt,
>>>>>> + .try_mbus_fmt = tvp515x_mbus_fmt,
>>>>>> + .s_mbus_fmt = tvp515x_mbus_fmt,
>>>>>> + .g_parm = tvp515x_g_parm,
>>>>>> + .s_parm = tvp515x_s_parm,
>>>>>> + .s_std_output = tvp5150_s_std,
>>>>>
>>>>> Do we really need both video and pad format ops?
>>>>>
>>>>
>>>> Good question, I don't know. Can this device be used as a standalone
>>>> v4l2 device? Or is supposed to always be a part of a video streaming
>>>> pipeline as a sub-device with a source pad? Sorry if my questions are
>>>> silly but as I stated before, I'm a newbie with v4l2 and MCF.
>>>
>>> The tvp5150 driver is used on some em28xx devices. It is nice to add
>>> auto-detection
>>> code to the driver, but converting it to the media bus should be done with
>>> enough care to not break support for the existing devices.
>>
>> So in other words, the tvp5150 driver needs both pad and non-pad ops.
>> Eventually all non-pad variants in subdev drivers should be replaced by the
>> pad variants so you don't have duplication of ops. But that will take a lot
>> more work.
Why doing it at pad level? It makes no sense. After selecting the pipeline/input
all pad's that handle analog TV formats should be changed at the same time:
video decoder, audio decoder, video enhancer/filters, etc.
> Great, that was a doubt I had, thanks for the clarification.
>
>>
>>> In the specific code of standards auto-detection, a few drivers currently
>>> support
>>> this feature. They're (or should be) coded to do is:
>>>
>>> If V4L2_STD_ALL is used, the driver should autodetect the video standard of
>>> the
>>> currently tuned channel.
>>
>> Actually, this is optional. As per the spec:
>>
>> "When the standard set is ambiguous drivers may return EINVAL or choose any
>> of
>> the requested standards."
>>
>> Nor does the spec say anything about doing an autodetect when STD_ALL is
>> passed
>> in. Most drivers will just set the std to PAL or NTSC in this case.
>>
>> If you want to autodetect, then use QUERYSTD. Applications cannot rely on
>> drivers
>> to handle V4L2_STD_ALL the way you say.
>>
>>> The detected standard can be returned to userspace via VIDIOC_G_STD.
>>
>> No! G_STD always returns the current *selected* standard. Only QUERYSTD
>> returns
>> the detected standard.
>>
>>>
>>> If otherwise, another standard mask is sent to the driver via VIDIOC_S_STD,
>>> the expected behavior is that the driver should select the standards
>>> detector
>>> to conform with the desired mask. If an unsupported configuration is
>>> requested,
>>> the driver should return the mask it actually used at the return of
>>> VIDIOC_S_STD
>>> call.
>>
>> S_STD is a write-only ioctl, so the mask isn't updated.
>>
>>> For example, if V4L2_STD_NTSC_M_JP is used, the driver should disable the
>>> auto-detector, and use NTSC/M with the Japanese audio standard. both S_STD
>>> and G_STD will return V4L2_STD_NTSC_M_JP.
>>> If V4L2_STD_MN is used and the driver can auto-detect between all those
>>> formats,
>>> the driver should detect if the standard is PAL or NTSC and detect between
>>> STD/M or STD/M (and the corresponding audio standards).
>>>
>>> If an unsupported mask like V4L2_STD_PAL_J | V4L2_STD_NTSC_M_JP is used,
>>> the driver
>>> should return a valid combination to S_STD (for example, returning
>>> V4L2_STD_PAL_J.
>>>
>>> In any case, on V4L2_G_STD, if the driver can't detect what's the standard,
>>> it should
>>> just return the current detection mask to userspace (instead of returning
>>> something
>>> like STD_INVALID).
>>
>> G_STD must always return the currently selected standard, never the detected
>> standard.
>> That's QUERYSTD.
>>
>> When the driver is first loaded it must pre-select a standard (usually in
>> the probe
>> function), either hardcoded (NTSC or PAL), or by doing an initial
>> autodetect. But
>> the standard should always be set to something. This allows you to start
>> streaming
>> immediately.
>>
>> Regards,
>>
>> Hans
>>
>>> I hope that helps,
>>> Mauro.
>>>
>>
>
> Thanks Mauro and Hans for your comments.
>
> I plan to work on the autodetect code and the issues called out by
> Sakari and resubmit the patch, can you point me a driver that got
> auto-detect the right way so I can use it as a reference?
The saa7115 driver implements it right. I've reviewed its code and tested it
with
a real device.
Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
