Em 20-09-2011 07:31, Doron Cohen escreveu: > Hi, > This patch changes the usb driver to support flexiable usb endpoint > rather than hard-cored numbers.
Also looked ok, except for the whitespace mangling. > > Thanks, > Doron Cohen > > -------------- > > > >>From e4134fa357d3f41476b8ff33ebbcb69c399641dc Mon Sep 17 00:00:00 2001 > From: Doron Cohen <dor...@siano-ms.com> > Date: Mon, 19 Sep 2011 13:58:43 +0300 > Subject: [PATCH 10/21] Support flexible endpoint numbering for various > SMS devices 9instead of hard coded values) > > --- > drivers/media/dvb/siano/smsusb.c | 240 > +++++++++++++++++++++++-------------- > 1 files changed, 149 insertions(+), 91 deletions(-) > > diff --git a/drivers/media/dvb/siano/smsusb.c > b/drivers/media/dvb/siano/smsusb.c > index b1c38a2..d7ef147 100644 > --- a/drivers/media/dvb/siano/smsusb.c > +++ b/drivers/media/dvb/siano/smsusb.c > @@ -2,7 +2,7 @@ > > Siano Mobile Silicon, Inc. > MDTV receiver kernel modules. > -Copyright (C) 2005-2009, Uri Shkolnik, Anatoly Greenblat > +Copyright (C) 2006-2011, Doron Cohen Cohen > > This program is free software: you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > @@ -29,21 +29,93 @@ along with this program. If not, see > <http://www.gnu.org/licenses/>. > #include "sms-cards.h" > #include "smsendian.h" > > -static int sms_dbg; > -module_param_named(debug, sms_dbg, int, 0644); > +int sms_debug; > +module_param_named(debug, sms_debug, int, 0644); > MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); > > #define USB1_BUFFER_SIZE 0x1000 > -#define USB2_BUFFER_SIZE 0x4000 > +#define USB2_BUFFER_SIZE 0x2000 > > #define MAX_BUFFERS 50 > #define MAX_URBS 10 > > + > +struct usb_device_id smsusb_id_table[] = { > + { USB_DEVICE(0x187f, 0x0010), > + .driver_info = SMS1XXX_BOARD_SIANO_STELLAR_ROM }, > + { USB_DEVICE(0x187f, 0x0100), > + .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, > + { USB_DEVICE(0x187f, 0x0200), > + .driver_info = SMS1XXX_BOARD_SIANO_NOVA_A }, > + { USB_DEVICE(0x187f, 0x0201), > + .driver_info = SMS1XXX_BOARD_SIANO_NOVA_B }, > + { USB_DEVICE(0x187f, 0x0300), > + .driver_info = SMS1XXX_BOARD_SIANO_VEGA }, > + { USB_DEVICE(0x2040, 0x1700), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT }, > + { USB_DEVICE(0x2040, 0x1800), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A }, > + { USB_DEVICE(0x2040, 0x1801), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B }, > + { USB_DEVICE(0x2040, 0x2000), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > + { USB_DEVICE(0x2040, 0x2009), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 }, > + { USB_DEVICE(0x2040, 0x200a), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > + { USB_DEVICE(0x2040, 0x2010), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > + { USB_DEVICE(0x2040, 0x2019), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > + { USB_DEVICE(0x2040, 0x5500), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > + { USB_DEVICE(0x2040, 0x5510), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > + { USB_DEVICE(0x2040, 0x5520), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > + { USB_DEVICE(0x2040, 0x5530), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > + { USB_DEVICE(0x2040, 0x5580), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > + { USB_DEVICE(0x2040, 0x5590), > + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > + { USB_DEVICE(0x187f, 0x0202), > + .driver_info = SMS1XXX_BOARD_SIANO_NICE }, > + { USB_DEVICE(0x187f, 0x0301), > + .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, > + { USB_DEVICE(0x187f, 0x0302), > + .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, > + { USB_DEVICE(0x187f, 0x0310), > + .driver_info = SMS1XXX_BOARD_SIANO_MING }, > + { USB_DEVICE(0x187f, 0x0500), > + .driver_info = SMS1XXX_BOARD_SIANO_PELE }, > + { USB_DEVICE(0x187f, 0x0600), > + .driver_info = SMS1XXX_BOARD_SIANO_RIO }, > + { USB_DEVICE(0x187f, 0x0700), > + .driver_info = SMS1XXX_BOARD_SIANO_DENVER_2160 }, > + { USB_DEVICE(0x187f, 0x0800), > + .driver_info = SMS1XXX_BOARD_SIANO_DENVER_1530 }, > + { USB_DEVICE(0x19D2, 0x0086), > + .driver_info = SMS1XXX_BOARD_ZTE_DVB_DATA_CARD }, > + { USB_DEVICE(0x19D2, 0x0078), > + .driver_info = SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD }, > + { } /* Terminating entry */ > + }; > + > +MODULE_DEVICE_TABLE(usb, smsusb_id_table); > + > +enum smsusb_state { > + SMSUSB_DISCONNECTED, > + SMSUSB_SUSPENDED, > + SMSUSB_ACTIVE > +}; > + > struct smsusb_device_t; > > struct smsusb_urb_t { > + struct list_head entry; > struct smscore_buffer_t *cb; > - struct smsusb_device_t *dev; > + struct smsusb_device_t *dev; > > struct urb urb; > }; > @@ -54,13 +126,26 @@ struct smsusb_device_t { > > struct smsusb_urb_t surbs[MAX_URBS]; > > - int response_alignment; > - int buffer_size; > + int response_alignment; > + int buffer_size; > + unsigned char in_ep; > + unsigned char out_ep; > + enum smsusb_state state; > }; > > static int smsusb_submit_urb(struct smsusb_device_t *dev, > struct smsusb_urb_t *surb); > > +/** > + * Completing URB's callback handler - top half (interrupt context) > + > + * adds completing sms urb to the global surbs list and activtes the > worker > + * thread the surb > + * IMPORTANT - blocking functions must not be called from here !!! > + > + * @param urb pointer to a completing urb object > + */ > + > static void smsusb_onresponse(struct urb *urb) > { > struct smsusb_urb_t *surb = (struct smsusb_urb_t *) urb->context; > @@ -121,6 +206,7 @@ exit_and_resubmit: > smsusb_submit_urb(dev, surb); > } > > + > static int smsusb_submit_urb(struct smsusb_device_t *dev, > struct smsusb_urb_t *surb) > { > @@ -135,7 +221,7 @@ static int smsusb_submit_urb(struct smsusb_device_t > *dev, > usb_fill_bulk_urb( > &surb->urb, > dev->udev, > - usb_rcvbulkpipe(dev->udev, 0x81), > + usb_rcvbulkpipe(dev->udev, dev->in_ep), > surb->cb->p, > dev->buffer_size, > smsusb_onresponse, > @@ -182,6 +268,9 @@ static int smsusb_sendrequest(void *context, void > *buffer, size_t size) > struct smsusb_device_t *dev = (struct smsusb_device_t *) context; > int dummy; > > + if (dev->state != SMSUSB_ACTIVE) > + return -ENOENT; > + > smsendian_handle_message_header((struct SmsMsgHdr_S *)buffer); > return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2), > buffer, size, &dummy, 1000); > @@ -291,15 +380,16 @@ static void smsusb_term_device(struct > usb_interface *intf) > struct smsusb_device_t *dev = usb_get_intfdata(intf); > > if (dev) { > + dev->state = SMSUSB_DISCONNECTED; > + > smsusb_stop_streaming(dev); > > /* unregister from smscore */ > if (dev->coredev) > smscore_unregister_device(dev->coredev); > > + sms_info("device 0x%p destroyed", dev); > kfree(dev); > - > - sms_info("device %p destroyed", dev); > } > > usb_set_intfdata(intf, NULL); > @@ -321,6 +411,7 @@ static int smsusb_init_device(struct usb_interface > *intf, int board_id) > memset(¶ms, 0, sizeof(params)); > usb_set_intfdata(intf, dev); > dev->udev = interface_to_usbdev(intf); > + dev->state = SMSUSB_DISCONNECTED; > > params.device_type = sms_get_board(board_id)->type; > > @@ -337,6 +428,8 @@ static int smsusb_init_device(struct usb_interface > *intf, int board_id) > case SMS_NOVA_A0: > case SMS_NOVA_B0: > case SMS_VEGA: > + case SMS_VENICE: > + case SMS_DENVER_1530: > dev->buffer_size = USB2_BUFFER_SIZE; > dev->response_alignment = > le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) - > @@ -346,6 +439,18 @@ static int smsusb_init_device(struct usb_interface > *intf, int board_id) > break; > } > > + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) > + if (intf->cur_altsetting->endpoint[i].desc. > + bEndpointAddress & USB_DIR_IN) > + dev->in_ep = intf->cur_altsetting->endpoint[i].desc. > + bEndpointAddress; > + else > + dev->out_ep = intf->cur_altsetting->endpoint[i].desc. > + bEndpointAddress; > + > + sms_info("in_ep = %02x, out_ep = %02x", > + dev->in_ep, dev->out_ep); > + > params.device = &dev->udev->dev; > params.buffer_size = dev->buffer_size; > params.num_buffers = MAX_BUFFERS; > @@ -377,6 +482,8 @@ static int smsusb_init_device(struct usb_interface > *intf, int board_id) > return rc; > } > > + dev->state = SMSUSB_ACTIVE; > + > rc = smscore_start_device(dev->coredev); > if (rc < 0) { > sms_err("smscore_start_device(...) failed"); > @@ -384,7 +491,7 @@ static int smsusb_init_device(struct usb_interface > *intf, int board_id) > return rc; > } > > - sms_info("device %p created", dev); > + sms_info("device 0x%p created", dev); > > return rc; > } > @@ -396,12 +503,21 @@ static int __devinit smsusb_probe(struct > usb_interface *intf, > char devpath[32]; > int i, rc; > > - rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81)); > - rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02)); > + sms_info("interface number %d", > + intf->cur_altsetting->desc.bInterfaceNumber); > > - if (intf->num_altsetting > 0) { > - rc = usb_set_interface( > - udev, intf->cur_altsetting->desc.bInterfaceNumber, 0); > + if (sms_get_board(id->driver_info)->intf_num != > + intf->cur_altsetting->desc.bInterfaceNumber) { > + sms_err("interface number is %d expecting %d", > + sms_get_board(id->driver_info)->intf_num, > + intf->cur_altsetting->desc.bInterfaceNumber); > + return -ENODEV; > + } > + > + if (intf->num_altsetting > 1) { > + rc = usb_set_interface(udev, > + intf->cur_altsetting->desc. > + bInterfaceNumber, 0); > if (rc < 0) { > sms_err("usb_set_interface failed, rc %d", rc); > return rc; > @@ -411,18 +527,24 @@ static int __devinit smsusb_probe(struct > usb_interface *intf, > sms_info("smsusb_probe %d", > intf->cur_altsetting->desc.bInterfaceNumber); > for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) > + { > sms_info("endpoint %d %02x %02x %d", i, > intf->cur_altsetting->endpoint[i].desc.bEndpointAddress, > intf->cur_altsetting->endpoint[i].desc.bmAttributes, > intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize); > - > - if ((udev->actconfig->desc.bNumInterfaces == 2) && > - (intf->cur_altsetting->desc.bInterfaceNumber == 0)) { > - sms_err("rom interface 0 is not used"); > - return -ENODEV; > + if (intf->cur_altsetting->endpoint[i].desc. > + bEndpointAddress & USB_DIR_IN) > + rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, > + intf->cur_altsetting->endpoint[i].desc. > + bEndpointAddress)); > + else > + rc = usb_clear_halt(udev, usb_sndbulkpipe(udev, > + intf->cur_altsetting->endpoint[i].desc. > + bEndpointAddress)); > } > > - if (intf->cur_altsetting->desc.bInterfaceNumber == 1) { > + if (id->driver_info == SMS1XXX_BOARD_SIANO_STELLAR_ROM) { > + sms_info("stellar device was found."); > snprintf(devpath, sizeof(devpath), "usb\\%d-%s", > udev->bus->busnum, udev->devpath); > sms_info("stellar device was found."); > @@ -445,7 +567,9 @@ static void smsusb_disconnect(struct usb_interface > *intf) > static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg) > { > struct smsusb_device_t *dev = usb_get_intfdata(intf); > - printk(KERN_INFO "%s: Entering status %d.\n", __func__, msg.event); > + printk(KERN_INFO "%s Entering status %d.\n", __func__, msg.event); > + dev->state = SMSUSB_SUSPENDED; > + /*smscore_set_power_mode(dev, SMS_POWER_MODE_SUSPENDED);*/ > smsusb_stop_streaming(dev); > return 0; > } > @@ -457,8 +581,8 @@ static int smsusb_resume(struct usb_interface *intf) > struct usb_device *udev = interface_to_usbdev(intf); > > printk(KERN_INFO "%s: Entering.\n", __func__); > - usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81)); > - usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02)); > + usb_clear_halt(udev, usb_rcvbulkpipe(udev, dev->in_ep)); > + usb_clear_halt(udev, usb_sndbulkpipe(udev, dev->out_ep)); > > for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) > printk(KERN_INFO "endpoint %d %02x %02x %d\n", i, > @@ -481,72 +605,6 @@ static int smsusb_resume(struct usb_interface > *intf) > return 0; > } > > -static const struct usb_device_id smsusb_id_table[] __devinitconst = { > - { USB_DEVICE(0x187f, 0x0010), > - .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, > - { USB_DEVICE(0x187f, 0x0100), > - .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, > - { USB_DEVICE(0x187f, 0x0200), > - .driver_info = SMS1XXX_BOARD_SIANO_NOVA_A }, > - { USB_DEVICE(0x187f, 0x0201), > - .driver_info = SMS1XXX_BOARD_SIANO_NOVA_B }, > - { USB_DEVICE(0x187f, 0x0300), > - .driver_info = SMS1XXX_BOARD_SIANO_VEGA }, > - { USB_DEVICE(0x2040, 0x1700), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT }, > - { USB_DEVICE(0x2040, 0x1800), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A }, > - { USB_DEVICE(0x2040, 0x1801), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B }, > - { USB_DEVICE(0x2040, 0x2000), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > - { USB_DEVICE(0x2040, 0x2009), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 }, > - { USB_DEVICE(0x2040, 0x200a), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > - { USB_DEVICE(0x2040, 0x2010), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > - { USB_DEVICE(0x2040, 0x2011), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > - { USB_DEVICE(0x2040, 0x2019), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, > - { USB_DEVICE(0x2040, 0x5500), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0x5510), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0x5520), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0x5530), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0x5580), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0x5590), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x187f, 0x0202), > - .driver_info = SMS1XXX_BOARD_SIANO_NICE }, > - { USB_DEVICE(0x187f, 0x0301), > - .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, > - { USB_DEVICE(0x2040, 0xb900), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xb910), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xb980), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xb990), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xc000), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xc010), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xc080), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { USB_DEVICE(0x2040, 0xc090), > - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, > - { } /* Terminating entry */ > - }; > - > -MODULE_DEVICE_TABLE(usb, smsusb_id_table); > - > static struct usb_driver smsusb_driver = { > .name = "smsusb", > .probe = smsusb_probe, -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
