Em 27-07-2011 11:58, Devin Heitmueller escreveu:
> On Wed, Jul 27, 2011 at 10:34 AM, Mauro Carvalho Chehab
> <[email protected]> wrote:
>> Btw, what's the video standard that you're using? DTV7? Does your device use
>> a xc3028 or xc3028xl? Whats's your demod and board?
>
> It was in the first sentence of his email. He's got an HVR-1400,
> which uses the xc3028L and dib7000p.
Hmm...
case CX23885_BOARD_HAUPPAUGE_HVR1400:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(dib7000p_attach,
&i2c_bus->i2c_adap,
0x12, &hauppauge_hvr1400_dib7000_config);
if (fe0->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
.i2c_addr = 0x64,
};
static struct xc2028_ctrl ctl = {
.fname = XC3028L_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = 5000,
/* This is true for all demods with
v36 firmware? */
.type = XC2028_D2633,
};
The entry for xc2028 there seems to be wrong! it is specifying a magic value for
.demod, instead of using one of the defined values for it.
On a quick look, this seems to be the only case where the macro is not used:
$ grep -E "demod\s+\=" `find drivers/media/ -type f`
drivers/media/video/cx231xx/cx231xx-cards.c: .demod = 0;
drivers/media/video/cx23885/cx23885-dvb.c: .demod
= XC3028_FE_OREN538,
drivers/media/video/cx23885/cx23885-dvb.c: .demod
= 5000,
drivers/media/video/cx23885/cx23885-dvb.c: .demod
= XC3028_FE_ZARLINK456,
drivers/media/video/cx23885/cx23885-dvb.c: .demod
= XC3028_FE_ZARLINK456,
drivers/media/video/cx88/cx88-cards.c: ctl->demod =
XC3028_FE_ZARLINK456;
drivers/media/video/cx88/cx88-cards.c: ctl->demod = XC3028_FE_OREN538;
drivers/media/video/cx88/cx88-cards.c: ctl->demod =
XC3028_FE_ZARLINK456;
drivers/media/video/cx88/cx88-cards.c: ctl->demod = XC3028_FE_OREN538;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_ZARLINK456;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_ZARLINK456;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_DEFAULT;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_DEFAULT;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_DEFAULT;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_CHINA;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_CHINA;
drivers/media/video/em28xx/em28xx-cards.c: ctl->demod =
XC3028_FE_OREN538;
drivers/media/video/cx18/cx18-dvb.c: .demod =
XC3028_FE_ZARLINK456,
drivers/media/video/cx18/cx18-dvb.c: .demod =
XC3028_FE_ZARLINK456,
drivers/media/video/cx18/cx18-dvb.c: .demod =
XC3028_FE_ZARLINK456,
drivers/media/video/saa7134/saa7134-cards.c: ctl.demod =
XC3028_FE_ZARLINK456;
drivers/media/video/saa7134/saa7134-cards.c: ctl.demod =
XC3028_FE_OREN538;
drivers/media/dvb/dvb-usb/cxusb.c: .demod =
XC3028_FE_ZARLINK456,
drivers/media/dvb/dvb-usb/dib0700_devices.c: .demod = XC3028_FE_DIBCOM52,
(non-relevant results removed)
In the specific case of this device, it should be using this macro:
#define XC3028_FE_DIBCOM52 5200
As it uses a Dibcom firmware. The logic inside tuner-xc2028 assumes that
those macros are used.
> It's also worth noting that he isn't the first person to complain
> about tuning offset problems with the xc3028L. Just look at the
> rather nasty hack some random user did for the EVGA inDtube (which is
> xc3208L/s5h1409).
As some drivers are properly using the macros while others aren't that
explains why when someone fixes xc3028 for a device, it breaks support
for other devices.
We should make sure that all devices will use the proper macros, and then
look into a fix for the logic.
>
> http://linuxtv.org/wiki/index.php/EVGA_inDtube
>
> Bear in mind that it worked when I added the original support.
> Somebody caused a regression since then though.
>
> In short, I can appreciate why the user is frustrated. The xc3028L
> support worked at one point and then somebody broke the xc3028 driver.
>
> Devin
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
