Hi Sascha,
this solution is not working for me. When compiling and installing the
"media_build", it works
fine. Here in combination with a Digivox Duo Stick:
> Bus 002 Device 002: ID 1462:8801 Micro Star International
# lsmod | grep dvb
dvb_usb_af9015 21067 5
dvb_usb 22011 1 dvb_usb_af9015
dvb_core 67624 1 dvb_usb
rc_core 17813 12
dvb_usb_af9015,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,dvb_usb,ir_rc5_decoder,rc_imon_pad,ir_nec_decoder,imon
i2c_core 18989 6
mxl5005s,af9013,nvidia,dvb_usb_af9015,dvb_usb,i2c_nforce2
usbcore 99058 11
lirc_imon,dvb_usb_af9015,dvb_usb,usbhid,imon,usb_storage,uas,ohci_hcd,ehci_hcd
One very strange behavior is, when theres no dvb-adapter at all, the system
loads dvb_ttpci, but
no such card is installed, nor gets any /dev/dvb/ created or anything logged in
dmsg:
# lsmod | grep dvb
dvb_ttpci 71007 0
dvb_core 67624 1 dvb_ttpci
saa7146_vv 39558 1 dvb_ttpci
saa7146 17148 2 dvb_ttpci,saa7146_vv
ttpci_eeprom 12344 1 dvb_ttpci
i2c_core 18989 5
dvb_ttpci,videodev,ttpci_eeprom,nvidia,i2c_nforce2
Building and installing "new_build" as suggested, ends up with
# dmesg | grep dvb
[ 26.828625] dvb_ttpci: Unknown symbol dvb_net_init (err 0)
[ 26.830730] dvb_ttpci: Unknown symbol dvb_net_release (err 0)
Here no dvb-adapter was attached, now insert the rtl2831u ...
[ 161.752088] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 161.886020] usb 1-2: New USB device found, idVendor=14aa, idProduct=0160
[ 161.886030] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 161.886036] usb 1-2: Product: DTV Receiver
[ 161.886041] usb 1-2: Manufacturer: DTV Receiver
[ 161.886046] usb 1-2: SerialNumber: 0000000000067936
... device got identified, but no module was loaded at all, doing it by hand ...
# modprobe -v dvb-usb-rtl2832u
WARNING: All config files need .conf: /etc/modprobe.d/usbhid, it will be
ignored in a future release.
insmod /lib/modules/2.6.38-bpo.2-686/kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko
WARNING: Error inserting dvb_usb
(/lib/modules/2.6.38-bpo.2-686/kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko):
Invalid argument
FATAL: Error inserting dvb_usb_rtl2832u
(/lib/modules/2.6.38-bpo.2-686/kernel/drivers/media/dvb/dvb-usb/dvb-usb-rtl2832u.ko):
Invalid argument
lets ignore the usbhid warning, its made out of comments anyway, checking dmsg
...
[ 296.652984] dvb_usb: disagrees about version of symbol rc_register_device
[ 296.652997] dvb_usb: Unknown symbol rc_register_device (err -22)
[ 296.654001] dvb_usb: disagrees about version of symbol rc_free_device
[ 296.654007] dvb_usb: Unknown symbol rc_free_device (err -22)
[ 296.654823] dvb_usb: disagrees about version of symbol rc_allocate_device
[ 296.654828] dvb_usb: Unknown symbol rc_allocate_device (err -22)
[ 296.656427] dvb_usb: disagrees about version of symbol rc_unregister_device
[ 296.656440] dvb_usb: Unknown symbol rc_unregister_device (err -22)
>From there on, those errors appear attaching any dvb-usb adapter i have, there
>seem to be a
problem. The rtl2831u adapter identifies as following and is labeled "Digitus
DA-70781-B/A1" and
worked fine with Jan Hoogenraads driver under 2.6.32.
lsusb -v -s 001:004
Bus 001 Device 004: ID 14aa:0160 WideView Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x14aa WideView Technology Inc.
idProduct 0x0160
bcdDevice 1.00
iManufacturer 1 DTV Receiver
iProduct 2 DTV Receiver
iSerial 3 0000000000067936
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB2.0-Bulk&Iso
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 6 Iso-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
Device Status: 0x0000
(Bus Powered)
Finally the kernel version (the only one installed):
# uname -a
Linux xbmc 2.6.38-bpo.2-686 #1 SMP Tue Jun 14 11:43:18 UTC 2011 i686 GNU/Linux
Greetings, from Germany as well ;-)
Thomas
Sascha Wüstemann wrote:
> Thomas Holzeisen wrote:
>> Hi there,
>>
>> I tried to get an RTL2831U dvb-t usb-stick running with a more recent kernel
>> (2.6.38) and failed.
>>
>> The hg respository ~jhoogenraad/rtl2831-r2 aborts on countless drivers, the
>> rc coding seem have to
>> changed a lot since it got touched the last time.
>>
>> The hg respository ~anttip/rtl2831u wont compile as well, since its even
>> older.
>>
>> The recent git respositories for media_tree and anttip dont contain drivers
>> for the rtl2831u.
>>
>> Has this device been abandoned, or is anyone working on it?
>>
>> greetings,
>> Thomas
>
> There are still people working on it and there is new sources, e.g. look at
> http://www.spinics.net/lists/linux-media/msg24890.html
> at the very bottom. Worked like a charm at my system with kernel 2.6.39.
>
> I think, there will be announcements later at
> http://wiki.zeratul.org/doku.php?id=linux:v4l:realtek:start
>
> Greetings from Braunschweig, Germany.
> Sascha
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html