Em 04-04-2011 17:18, [email protected] escreveu: > From: Stefan Ringel <[email protected]> > > add dtv78 parameter
The dtv78 entry is a hack meant for card usage in Australia, that speeds up channel detection there. Again, it should be specified only when needed, and at per-board basis. > > > Signed-off-by: Stefan Ringel <[email protected]> > --- > drivers/staging/tm6000/tm6000-cards.c | 11 +++++++++-- > 1 files changed, 9 insertions(+), 2 deletions(-) > > diff --git a/drivers/staging/tm6000/tm6000-cards.c > b/drivers/staging/tm6000/tm6000-cards.c > index eef58da..cf2e76c 100644 > --- a/drivers/staging/tm6000/tm6000-cards.c > +++ b/drivers/staging/tm6000/tm6000-cards.c > @@ -65,6 +65,9 @@ static unsigned int xc2028_mts; > module_param(xc2028_mts, int, 0644); > MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)"); > > +static unsigned int xc2028_dtv78; > +module_param(xc2028_dtv78, int, 0644); > +MODULE_PARM_DESC(xc2028_dtv78, "enable dualband config (xc2028/3028 only)"); > > struct tm6000_board { > char *name; > @@ -687,8 +690,12 @@ static void tm6000_config_tuner(struct tm6000_core *dev) > ctl.read_not_reliable = 0; > ctl.msleep = 10; > ctl.demod = XC3028_FE_ZARLINK456; > - ctl.vhfbw7 = 1; > - ctl.uhfbw8 = 1; > + > + if (xc2028_dtv78) { > + ctl.vhfbw7 = 1; > + ctl.uhfbw8 = 1; > + } > + > if (xc2028_mts) > ctl.mts = 1; > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
