Em 20-03-2011 16:32, Wojciech Myrda escreveu:
> It turns ot that revised patch not only applies cleanly but compiles as
> well agaist Linux Kernel 2.6.38-rc8-next-20110321. Looking at dmesg
> everything is recognized properly as well. Do you guys think if it is
> possible to include it into the tree?
Please post the patch again, with a few fixes (see bellow), and add your
Signed-off-by: (please read how to submit patches section at linuxtv.org wiki
for more details).
> diff -r 1da5fed5c8b2 linux/drivers/media/video/cx23885/cx23885-cards.c
> --- a/linux/drivers/media/video/cx23885/cx23885-cards.c Sun Sep 19
> 02:23:09 2010 -0300
> +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c Sat Oct 02
> 11:19:50 2010 +0300
/linux? Are you using the old -hg tree? Please don't do that. The mercurial
tree is not touched for the last 8 months! Please use, instead the
media_tree.git
(media_build.git allows you to compile/test a driver against the media_tree.git
tree).
> @@ -169,6 +169,10 @@
> .name = "TurboSight TBS 6920",
> .portb = CX23885_MPEG_DVB,
> },
> + [CX23885_BOARD_PROF_8000] = {
> + .name = "Prof Revolution DVB-S2 8000",
> + .portb = CX23885_MPEG_DVB,
> + },
> [CX23885_BOARD_TEVII_S470] = {
> .name = "TeVii S470",
> .portb = CX23885_MPEG_DVB,
> @@ -388,6 +392,10 @@
> .subdevice = 0x8888,
> .card = CX23885_BOARD_TBS_6920,
> }, {
> + .subvendor = 0x8000,
> + .subdevice = 0x3034,
> + .card = CX23885_BOARD_PROF_8000,
> + }, {
> .subvendor = 0xd470,
> .subdevice = 0x9022,
> .card = CX23885_BOARD_TEVII_S470,
> @@ -813,6 +821,7 @@
> mdelay(20);
> cx_set(GP0_IO, 0x00040004);
> break;
> + case CX23885_BOARD_PROF_8000:
> case CX23885_BOARD_TBS_6920:
> cx_write(MC417_CTL, 0x00000036);
> cx_write(MC417_OEN, 0x00001000);
> @@ -1043,6 +1052,7 @@
> ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> break;
> + case CX23885_BOARD_PROF_8000:
> case CX23885_BOARD_TEVII_S470:
> case CX23885_BOARD_DVBWORLD_2005:
> ts1->gen_ctrl_val = 0x5; /* Parallel */
> --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c.old 2011-03-20
> 08:20:37.384001338 +0100
> +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c 2011-03-20
> 08:29:56.757001476 +0100
> @@ -47,6 +47,9 @@
> #include "dibx000_common.h"
> #include "zl10353.h"
> #include "stv0900.h"
> +#include "stb6100.h"
> +#include "stb6100_proc.h"
> +#include "stv0900.h"
If you're adding more dependencies here, you'll need to touch also
drivers/media/video/cx23885/Kconfig
in order to select the right frontends.
> #include "stv0900_reg.h"
> #include "stv6110.h"
> #include "lnbh24.h"
> @@ -478,6 +478,35 @@
> .if_khz = 5380,
> };
>
> +static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t
> voltage)
> +{
> + struct cx23885_tsport *port = fe->dvb->priv;
> + struct cx23885_dev *dev = port->dev;
> +
> + if (voltage == SEC_VOLTAGE_18)
> + cx_write(MC417_RWD, 0x00001e00);
> + else if (voltage == SEC_VOLTAGE_13)
> + cx_write(MC417_RWD, 0x00001a00);
> + else
> + cx_write(MC417_RWD, 0x00001800);
> + return 0;
> +}
> +
> +static struct stv0900_config prof_8000_stv0900_config = {
> + .demod_address = 0x6a,
> + .xtal = 27000000,
> + .clkmode = 3,
> + .diseqc_mode = 2,
> + .tun1_maddress = 0,
> + .tun1_adc = 0,
> + .path1_mode = 3,
> +};
> +
> +static struct stb6100_config prof_8000_stb6100_config = {
> + .tuner_address = 0x60,
> + .refclock = 27000000,
> +};
> +
> static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
> struct dvb_frontend_parameters *param)
> {
> @@ -1094,6 +1123,29 @@
> goto frontend_detach;
> }
> break;
> + case CX23885_BOARD_PROF_8000: {
> + struct dvb_tuner_ops *tuner_ops = NULL;
> +
> + i2c_bus = &dev->i2c_bus[0];
> + fe0->dvb.frontend = dvb_attach(stv0900_attach,
> + &prof_8000_stv0900_config,
> + &i2c_bus->i2c_adap, 0);
> + if (fe0->dvb.frontend != NULL) {
> + if (dvb_attach(stb6100_attach, fe0->dvb.frontend,
> + &prof_8000_stb6100_config,
> + &i2c_bus->i2c_adap)) {
> + tuner_ops = &fe0->dvb.frontend->ops.tuner_ops;
> + tuner_ops->set_frequency = stb6100_set_freq;
> + tuner_ops->get_frequency = stb6100_get_freq;
> + tuner_ops->set_bandwidth = stb6100_set_bandw;
> + tuner_ops->get_bandwidth = stb6100_get_bandw;
> +
> + fe0->dvb.frontend->ops.set_voltage =
> + p8000_set_voltage;
> + }
> + }
> + break;
> + }
> default:
> printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
> " isn't supported yet\n",
> --- a/linux/drivers/media/video/cx23885/cx23885.h.old 2011-03-20
> 08:33:15.159001527 +0100
> +++ b/linux/drivers/media/video/cx23885/cx23885.h 2011-03-20
> 08:34:32.244001547 +0100
> @@ -86,6 +86,7 @@
> #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
> #define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29
> #define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
> +#define CX23885_BOARD_PROF_8000 31
>
> #define GPIO_0 0x00000001
> #define GPIO_1 0x00000002
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
