Radek, Please attach the full dmesg output when starting video capture with the second camera. Also increase log verbosity first:
something like this: rmmod uvcvideo modprobe uvcvideo trace=65535 You should also refer your capture settings (if I remember MJPG 640x480@24 fps) and that if you use one c910 and one c600 everything works fine. Note: Cc linux-media since you also posted this thread there. Regards, Paulo 2011/1/14 Radek Mašín <ra...@masin.eu>: > Hello, > I'm trying to get working two Logitech C910 cameras in one computer and I'm > unable to > do it. I connect both cameras to one USB controller and first camera is > starting capture > without problem, but when I try to start second camera during first camera is > running, > I get message in log "uvcvideo: Failed to submit URB 0" and capturing fails. > I have discussed this problem on quickcamteam forum and it seems, that there > is problem > with uvcvideo driver for this camera. > Cameras have been tested in two different systems (SuSe 11.2 and Ubuntu > 10.10) and on > both systems I get same behavior. > > Thank you > Radek Masin > _______________________________________________ > Linux-uvc-devel mailing list > linux-uvc-de...@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/linux-uvc-devel > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
