Hi Jarod,
I'm using an MultiCard-reader which exposes itself like shown below.
It is falsly claimed by the mceusb-driver from (2.6.36 from debian-
experimental) .
Would be good to create an exception for this one if possible. Let me know if
you need more information or if you want me to take other actions.
>From dmesg:
[22389.084024] Registered IR keymap rc-rc6-mce
[22389.084288] input: Media Center Ed. eHome Infrared Remote Transceiver
(0bda:0161) as /devices/virtual/rc/rc0/input8
[22389.084484] rc0: Media Center Ed. eHome Infrared Remote Transceiver
(0bda:0161) as /devices/virtual/rc/rc0
[22389.084877] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at
minor = 1
[22389.085515] mceusb 1-2:1.0: Registered Generic USB2.0-CRW on usb1:6
[22389.164964] Registered IR keymap rc-rc6-mce
[22389.165264] input: Media Center Ed. eHome Infrared Remote Transceiver
(0bda:0161) as /devices/virtual/rc/rc1/input9
[22389.165402] rc1: Media Center Ed. eHome Infrared Remote Transceiver
(0bda:0161) as /devices/virtual/rc/rc1
[22389.171179] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at
minor = 2
[22389.171995] mceusb 1-2:1.1: Registered Generic USB2.0-CRW on usb1:6
lsusb -v:
Bus 001 Device 007: ID 0bda:0161 Realtek Semiconductor Corp. Mass Storage
Device
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0161 Mass Storage Device
bcdDevice 61.10
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 116
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.10 (Warning: Only accurate for version 1.0)
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 3750
dwMaxiumumClock 7500
bNumClockSupported 0
dwDataRate 10080 bps
dwMaxDataRate 312500 bps
bNumDataRatesSupp. 0
dwMaxIFSD 254
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00010030
Auto clock change
Auto baud rate change
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 8
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
best regards,
--
Patrick Boettcher - KernelLabs
http://www.kernellabs.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
