On 6/16/19 8:22 PM, Johan Korsnes wrote:
> CEC adapters and controllers (handlers) are now set up as follows:
>
> 1. Allocate CEC adapters: setup of control handlers in next step
> requires these adapters to be allocated.
> 2. Setup of control handlers: This must be done prior to registering
> and exposing the adapters to user space to avoid a race condition.
> 3. Register CEC adapters: make them available to user space.
>
> Signed-off-by: Johan Korsnes <johan.kors...@gmail.com>
> ---
> drivers/media/platform/vivid/vivid-core.c | 100 +++++++++++++---------
> 1 file changed, 58 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/media/platform/vivid/vivid-core.c
> b/drivers/media/platform/vivid/vivid-core.c
> index 8c211fba3c66..bc2a176937a4 100644
> --- a/drivers/media/platform/vivid/vivid-core.c
> +++ b/drivers/media/platform/vivid/vivid-core.c
> @@ -667,6 +667,9 @@ static int vivid_create_instance(struct platform_device
> *pdev, int inst)
> v4l2_std_id tvnorms_cap = 0, tvnorms_out = 0;
> int ret;
> int i;
> +#ifdef CONFIG_VIDEO_VIVID_CEC
> + unsigned int cec_tx_bus_cnt = 0;
> +#endif
>
> /* allocate main vivid state structure */
> dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> @@ -1058,14 +1061,6 @@ static int vivid_create_instance(struct
> platform_device *pdev, int inst)
> vivid_update_format_cap(dev, false);
> vivid_update_format_out(dev);
>
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_cap);
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_out);
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_cap);
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_out);
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_rx);
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_tx);
> - v4l2_ctrl_handler_setup(&dev->ctrl_hdl_sdr_cap);
> -
> /* initialize overlay */
> dev->fb_cap.fmt.width = dev->src_rect.width;
> dev->fb_cap.fmt.height = dev->src_rect.height;
> @@ -1226,6 +1221,47 @@ static int vivid_create_instance(struct
> platform_device *pdev, int inst)
> dev->fb_info.node);
> }
>
> +#ifdef CONFIG_VIDEO_VIVID_CEC
> + if (dev->has_vid_cap && in_type_counter[HDMI]) {
> + struct cec_adapter *adap;
> +
> + adap = vivid_cec_alloc_adap(dev, 0, false);
> + ret = PTR_ERR_OR_ZERO(adap);
Since you are changing things in this code anyway, can you make another
change? PTR_ERR_OR_ZERO should be PTR_ERR instead.
> + if (ret < 0)
> + goto unreg_dev;
> + dev->cec_rx_adap = adap;
> + }
> +
> + if (dev->has_vid_out) {
> + for (i = 0; i < dev->num_outputs; i++) {
> + struct cec_adapter *adap;
> +
> + if (dev->output_type[i] != HDMI)
> + continue;
> +
> + dev->cec_output2bus_map[i] = cec_tx_bus_cnt;
> + adap = vivid_cec_alloc_adap(dev, cec_tx_bus_cnt, true);
> + ret = PTR_ERR_OR_ZERO(adap);
Same here.
cec_allocate_adapter() never returns NULL, so PTR_ERR is preferred.
Regards,
Hans
> + if (ret < 0) {
> + for (i = 0; i < dev->num_outputs; i++)
> + cec_delete_adapter(dev->cec_tx_adap[i]);
> + goto unreg_dev;
> + }
> +
> + dev->cec_tx_adap[cec_tx_bus_cnt] = adap;
> + cec_tx_bus_cnt++;
> + }
> + }
> +#endif
> +
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_cap);
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_out);
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_cap);
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_out);
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_rx);
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_tx);
> + v4l2_ctrl_handler_setup(&dev->ctrl_hdl_sdr_cap);
> +
> /* finally start creating the device nodes */
> if (dev->has_vid_cap) {
> vfd = &dev->vid_cap_dev;
> @@ -1255,22 +1291,15 @@ static int vivid_create_instance(struct
> platform_device *pdev, int inst)
>
> #ifdef CONFIG_VIDEO_VIVID_CEC
> if (in_type_counter[HDMI]) {
> - struct cec_adapter *adap;
> -
> - adap = vivid_cec_alloc_adap(dev, 0, false);
> - ret = PTR_ERR_OR_ZERO(adap);
> - if (ret < 0)
> - goto unreg_dev;
> - dev->cec_rx_adap = adap;
> - ret = cec_register_adapter(adap, &pdev->dev);
> + ret = cec_register_adapter(dev->cec_rx_adap,
> &pdev->dev);
> if (ret < 0) {
> - cec_delete_adapter(adap);
> + cec_delete_adapter(dev->cec_rx_adap);
> dev->cec_rx_adap = NULL;
> goto unreg_dev;
> }
> - cec_s_phys_addr(adap, 0, false);
> + cec_s_phys_addr(dev->cec_rx_adap, 0, false);
> v4l2_info(&dev->v4l2_dev, "CEC adapter %s registered
> for HDMI input 0\n",
> - dev_name(&adap->devnode.dev));
> + dev_name(&dev->cec_rx_adap->devnode.dev));
> }
> #endif
>
> @@ -1282,10 +1311,6 @@ static int vivid_create_instance(struct
> platform_device *pdev, int inst)
> }
>
> if (dev->has_vid_out) {
> -#ifdef CONFIG_VIDEO_VIVID_CEC
> - unsigned int bus_cnt = 0;
> -#endif
> -
> vfd = &dev->vid_out_dev;
> snprintf(vfd->name, sizeof(vfd->name),
> "vivid-%03d-vid-out", inst);
> @@ -1313,30 +1338,21 @@ static int vivid_create_instance(struct
> platform_device *pdev, int inst)
> #endif
>
> #ifdef CONFIG_VIDEO_VIVID_CEC
> - for (i = 0; i < dev->num_outputs; i++) {
> - struct cec_adapter *adap;
> -
> - if (dev->output_type[i] != HDMI)
> - continue;
> - dev->cec_output2bus_map[i] = bus_cnt;
> - adap = vivid_cec_alloc_adap(dev, bus_cnt, true);
> - ret = PTR_ERR_OR_ZERO(adap);
> - if (ret < 0)
> - goto unreg_dev;
> - dev->cec_tx_adap[bus_cnt] = adap;
> - ret = cec_register_adapter(adap, &pdev->dev);
> + for (i = 0; i < cec_tx_bus_cnt; i++) {
> + ret = cec_register_adapter(dev->cec_tx_adap[i],
> &pdev->dev);
> if (ret < 0) {
> - cec_delete_adapter(adap);
> - dev->cec_tx_adap[bus_cnt] = NULL;
> + for (; i < cec_tx_bus_cnt; i++) {
> + cec_delete_adapter(dev->cec_tx_adap[i]);
> + dev->cec_tx_adap[i] = NULL;
> + }
> goto unreg_dev;
> }
> v4l2_info(&dev->v4l2_dev, "CEC adapter %s registered
> for HDMI output %d\n",
> - dev_name(&adap->devnode.dev), bus_cnt);
> - bus_cnt++;
> - if (bus_cnt <= out_type_counter[HDMI])
> - cec_s_phys_addr(adap, bus_cnt << 12, false);
> + dev_name(&dev->cec_tx_adap[i]->devnode.dev),
> i);
> + if (i <= out_type_counter[HDMI])
> + cec_s_phys_addr(dev->cec_tx_adap[i], i << 12,
> false);
> else
> - cec_s_phys_addr(adap, 0x1000, false);
> + cec_s_phys_addr(dev->cec_tx_adap[i], 0x1000,
> false);
> }
> #endif
>
>
