This patch adds the of_graph support to describe the tvp connections. Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result of discussion [1],[2] the device-tree maps these ports 1:1. The svideo connector must be conneted to port@0/endpoint@1, look at the Documentation for more information. Since the TVP5150 is a converter the device-tree must contain at least 1-input and 1-output port. The mc-connectors and mc-links are only created if the device-tree contains the corresponding connector nodes. If more than one connector is available the media_entity_operations.link_setup() callback ensures that only one connector is active.
[1] https://www.spinics.net/lists/linux-media/msg138545.html [2] https://www.spinics.net/lists/linux-media/msg138546.html Signed-off-by: Marco Felsch <m.fel...@pengutronix.de> --- Changelog: [1] https://patchwork.kernel.org/cover/10794703/ [2] https://patchwork.kernel.org/cover/10786553/ v5: - Fixing build deps: - tvp5150_mc_init: fix CONFIG_MEDIA_CONTROLLER deps - struct tvp5150: drop CONFIG_MEDIA_CONTROLLER conditional property includes. This leads into to complex deps for futher development. - tvp5150_dt_cleanup: enable function only if CONFIG_OF is enabled - tvp5150_parse_dt: enable function only if CONFIG_OF is enabled - tvp5150_probe: call tvp5150_dt_cleanup only if CONFIG_OF is enabled - Simplify link_setup routine: - use generic connector parsing since both series [1,2] are squashed into one - struct tvp5150: drop pads_state and modify_second_link property due to link_setup() rework. - tvp5150_link_setup: add more comments - tvp5150_link_setup: simply the link setup routine a lot. Edit the 2nd link directly within the driver instead of a recursive media-framework call (__media_entity_setup_link). This improves the readability and shrinks the driver code. - tvp5150_link_setup: disable all active links in case user switches connectors without disable it first. - tvp5150_registered: simplify default link enable path due to link_setup() rework. - General cleanups - tvp5150_parse_dt: drop unecessary test - tvp5150_parse_dt: add err message due to misconfiguration - tvp5150_parse_dt: make use of V4L2_MBUS_UNKNOWN definition - s/dev_dbg/dev_dbg_lvl v4: - rebase on top of media_tree/master, fix merge conflict due to commit 60359a28d592 ("media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zero") v3: - probe(): s/err/err_free_v4l2_ctrls - drop MC dependency for tvp5150_pads v2: - adapt commit message - unify ifdef switches - rename tvp5150_valid_input -> tvp5150_of_valid_input, to be more precise - mc: use 2-input and 1-output pad - mc: link svideo connector to both input pads - mc: enable/disable svideo links in one go - mc: change link_setup() behaviour, switch the input src don't require a explicite disable before. - mc: rename 'local' media_pad param to tvp5150_pad to avoid confusion - mc: enable link to the first available connector and set the corresponding tvp5150 input src per default during registered() - mc/of: factor out oftree connector allocation - of: drop svideo dt port - of: move svideo connector to port@0/endpoint@1 - of: require at least 1-in and 1-out endpoint drivers/media/i2c/tvp5150.c | 408 ++++++++++++++++++++++++++++++++---- 1 file changed, 368 insertions(+), 40 deletions(-) diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index 89da921c8886..91504fddb551 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -44,16 +44,29 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg) enum tvp5150_pads { - TVP5150_PAD_IF_INPUT, + TVP5150_PAD_AIP1A = TVP5150_COMPOSITE0, + TVP5150_PAD_AIP1B, TVP5150_PAD_VID_OUT, TVP5150_NUM_PADS }; +struct tvp5150_connector { + struct v4l2_fwnode_connector base; + struct media_entity ent; + struct media_pad pad; +}; + struct tvp5150 { struct v4l2_subdev sd; -#ifdef CONFIG_MEDIA_CONTROLLER + /* additional additional endpoint for the svideo connector */ + struct device_node *endpoints[TVP5150_NUM_PADS + 1]; + unsigned int endpoints_num; + + /* media-ctl properties */ struct media_pad pads[TVP5150_NUM_PADS]; -#endif + struct tvp5150_connector *connectors; + int connectors_num; + struct v4l2_ctrl_handler hdl; struct v4l2_rect rect; struct regmap *regmap; @@ -1167,6 +1180,129 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd, return 0; } +/**************************************************************************** + * Media entity ops + ****************************************************************************/ +#if defined(CONFIG_MEDIA_CONTROLLER) +static int tvp5150_set_link(struct media_pad *connector_pad, + struct media_pad *tvp5150_pad, u32 flags) +{ + struct media_link *link; + + link = media_entity_find_link(connector_pad, tvp5150_pad); + if (!link) + return -EINVAL; + + link->flags = flags; + link->reverse->flags = link->flags; + + return 0; +} + +static int tvp5150_disable_all_input_links(struct tvp5150 *decoder) +{ + struct media_pad *connector_pad; + int i, err; + + for (i = 0; i < TVP5150_NUM_PADS - 1; i++) { + connector_pad = media_entity_remote_pad(&decoder->pads[i]); + if (!connector_pad) + continue; + + err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0); + if (err) + return err; + } + + return 0; +} + +static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config); + +static int tvp5150_link_setup(struct media_entity *entity, + const struct media_pad *tvp5150_pad, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct tvp5150 *decoder = to_tvp5150(sd); + struct media_pad *other_tvp5150_pad = + &decoder->pads[tvp5150_pad->index ^ 1]; + bool is_svideo = false; + int i, err; + + /* + * The TVP5150 state is determined by the enabled sink pad link(s). + * Enabling or disabling the source pad link has no effect. + */ + if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE) + return 0; + + /* Check if the svideo connector should be enabled */ + for (i = 0; i < decoder->connectors_num; i++) { + if (remote->entity == &decoder->connectors[i].ent) { + is_svideo = + decoder->connectors[i].base.type == V4L2_CON_SVIDEO; + break; + } + } + + dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]", + remote->entity->name, remote->index, + tvp5150_pad->entity->name, tvp5150_pad->index, + flags & MEDIA_LNK_FL_ENABLED); + if (is_svideo) + dev_dbg_lvl(sd->dev, 1, debug, + "link setup '%s':%d->'%s':%d[%d]", + remote->entity->name, remote->index, + other_tvp5150_pad->entity->name, + other_tvp5150_pad->index, + flags & MEDIA_LNK_FL_ENABLED); + + /* + * The TVP5150 has a internal mux which allows the following setup: + * + * comp-connector1 --\ + * |---> AIP1A + * / + * svideo-connector -| + * \ + * |---> AIP1B + * comp-connector2 --/ + * + * We can't rely on user space that the current connector gets disabled + * first before enabling the new connector. Disable all active + * connector links to be on the safe side. + */ + err = tvp5150_disable_all_input_links(decoder); + if (err) + return err; + + tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index, + flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL : + TVP5150_BLACK_SCREEN, 0); + + if (flags & MEDIA_LNK_FL_ENABLED) { + /* + * S-Video connector is conneted to both ports AIP1A and AIP1B. + * Both links must be enabled in one-shot regardless which link + * the user requests. + */ + if (is_svideo) { + err = tvp5150_set_link((struct media_pad *) remote, + other_tvp5150_pad, flags); + if (err) + return err; + } + } + + return 0; +} + +static const struct media_entity_operations tvp5150_sd_media_ops = { + .link_setup = tvp5150_link_setup, +}; +#endif /**************************************************************************** I2C Command ****************************************************************************/ @@ -1314,6 +1450,65 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) return 0; } +static int tvp5150_registered(struct v4l2_subdev *sd) +{ +#if defined(CONFIG_MEDIA_CONTROLLER) + struct tvp5150 *decoder = to_tvp5150(sd); + unsigned int i; + int ret; + + /* + * Setup connector pads and links. Enable the link to the first + * available connector per default. + */ + for (i = 0; i < decoder->connectors_num; i++) { + struct media_entity *con = &decoder->connectors[i].ent; + struct media_pad *pad = &decoder->connectors[i].pad; + unsigned int port = decoder->connectors[i].base.remote_port; + bool is_svideo = + decoder->connectors[i].base.type == V4L2_CON_SVIDEO; + int flags = i ? 0 : MEDIA_LNK_FL_ENABLED; + + pad->flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(con, 1, pad); + if (ret < 0) + return ret; + + ret = media_device_register_entity(sd->v4l2_dev->mdev, con); + if (ret < 0) + return ret; + + ret = media_create_pad_link(con, 0, &sd->entity, port, flags); + if (ret < 0) { + media_device_unregister_entity(con); + return ret; + } + + if (is_svideo) { + /* svideo links to both aip1a and aip1b */ + ret = media_create_pad_link(con, 0, &sd->entity, + port + 1, flags); + if (ret < 0) { + media_device_unregister_entity(con); + return ret; + } + } + + /* enable default input */ + if (flags == MEDIA_LNK_FL_ENABLED) { + decoder->input = + is_svideo ? TVP5150_SVIDEO : + port == 0 ? TVP5150_COMPOSITE0 : + TVP5150_COMPOSITE1; + + tvp5150_selmux(sd); + } + } +#endif + return 0; +} + + /* ----------------------------------------------------------------------- */ static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { @@ -1367,6 +1562,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = { .pad = &tvp5150_pad_ops, }; +static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = { + .registered = tvp5150_registered, +}; + /**************************************************************************** I2C Client & Driver ****************************************************************************/ @@ -1515,38 +1714,171 @@ static int tvp5150_init(struct i2c_client *c) return 0; } -static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np) +#if defined(CONFIG_MEDIA_CONTROLLER) +static int tvp5150_add_of_connectors(struct tvp5150 *decoder) { - struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; - struct device_node *ep; - unsigned int flags; - int ret = 0; + struct device *dev = decoder->sd.dev; + struct tvp5150_connector *connectors; + unsigned int connectors_num = decoder->connectors_num; + int i, ret; + + /* Allocate and initialize all available input connectors */ + connectors = devm_kcalloc(dev, connectors_num, sizeof(*connectors), + GFP_KERNEL); + if (!connectors) + return -ENOMEM; - ep = of_graph_get_next_endpoint(np, NULL); - if (!ep) - return -EINVAL; + for (i = 0; i < connectors_num; i++) { + struct v4l2_fwnode_connector *c = &connectors[i].base; - ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg); - if (ret) - goto err; + ret = v4l2_fwnode_parse_connector( + of_fwnode_handle(decoder->endpoints[i]), c); + + connectors[i].ent.flags = MEDIA_ENT_FL_CONNECTOR; + connectors[i].ent.function = c->type == V4L2_CON_SVIDEO ? + MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE; + connectors[i].ent.name = c->label; + } + + decoder->connectors = connectors; - flags = bus_cfg.bus.parallel.flags; + return 0; +} +#endif - if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && - !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && - flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && - flags & V4L2_MBUS_FIELD_EVEN_LOW)) { +static int tvp5150_mc_init(struct v4l2_subdev *sd) +{ +#if defined(CONFIG_MEDIA_CONTROLLER) + struct tvp5150 *decoder = to_tvp5150(sd); + unsigned int i; + int ret; + + sd->entity.ops = &tvp5150_sd_media_ops; + sd->entity.function = MEDIA_ENT_F_ATV_DECODER; + + /* Initialize all TVP5150 pads */ + for (i = 0; i < TVP5150_NUM_PADS; i++) { + if (i < TVP5150_NUM_PADS - 1) { + decoder->pads[i].flags = MEDIA_PAD_FL_SINK; + decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG; + } else { + decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE; + decoder->pads[i].sig_type = PAD_SIGNAL_DV; + } + } + ret = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, + decoder->pads); + if (ret < 0) + goto out; + + if (IS_ENABLED(CONFIG_OF)) + ret = tvp5150_add_of_connectors(decoder); +out: + return ret; +#else + return 0; +#endif +} + +#if defined(CONFIG_OF) +static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np) +{ + struct device *dev = decoder->sd.dev; + struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_UNKNOWN }; + struct v4l2_fwnode_connector c; + struct device_node *ep_np; + unsigned int flags; + int ret, i = 0, in = 0; + bool found = false; + + /* at least 1 output and 1 input */ + decoder->endpoints_num = of_graph_get_endpoint_count(np); + if (decoder->endpoints_num < 2 || decoder->endpoints_num > 4) { + dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n"); ret = -EINVAL; goto err; } - decoder->mbus_type = bus_cfg.bus_type; + for_each_endpoint_of_node(np, ep_np) { + struct of_endpoint ep; + + of_graph_parse_endpoint(ep_np, &ep); + switch (ep.port) { + /* fall through */ + case TVP5150_PAD_AIP1A: + case TVP5150_PAD_AIP1B: + ret = v4l2_fwnode_parse_connector( + of_fwnode_handle(ep_np), &c); + if (c.type != V4L2_CON_COMPOSITE && + c.type != V4L2_CON_SVIDEO) { + dev_err(dev, + "Invalid endpoint %d on port %d\n", + c.remote_id, c.remote_port); + ret = -EINVAL; + goto err; + } + in++; + break; + case TVP5150_PAD_VID_OUT: + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), + &bus_cfg); + if (ret) + goto err; + + flags = bus_cfg.bus.parallel.flags; + + if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && + !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && + flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && + flags & V4L2_MBUS_FIELD_EVEN_LOW)) { + ret = -EINVAL; + goto err; + } + + decoder->mbus_type = bus_cfg.bus_type; + break; + default: + dev_err(dev, "Invalid port %d for endpoint %pOF\n", + ep.port, ep.local_node); + ret = -EINVAL; + goto err; + } + + of_node_get(ep_np); + decoder->endpoints[i] = ep_np; + i++; + found = true; + } + + decoder->connectors_num = in; + return found ? 0 : -ENODEV; err: - of_node_put(ep); return ret; } +static void tvp5150_dt_cleanup(struct tvp5150 *decoder) +{ + unsigned int i; + + for (i = 0; i < TVP5150_NUM_PADS; i++) + of_node_put(decoder->endpoints[i]); +} + +#else /* !defined(CONFIG_OF) */ + +static inline int +tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np) +{ + return 0; +} + +static inline void tvp5150_dt_cleanup(struct tvp5150 *decoder) +{ + +} +#endif + static const char * const tvp5150_test_patterns[2] = { "Disabled", "Black screen" @@ -1585,7 +1917,7 @@ static int tvp5150_probe(struct i2c_client *c, res = tvp5150_parse_dt(core, np); if (res) { dev_err(sd->dev, "DT parsing error: %d\n", res); - return res; + goto err_cleanup_dt; } } else { /* Default to BT.656 embedded sync */ @@ -1593,25 +1925,16 @@ static int tvp5150_probe(struct i2c_client *c, } v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); + sd->internal_ops = &tvp5150_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; -#if defined(CONFIG_MEDIA_CONTROLLER) - core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; - core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG; - core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; - core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV; - - sd->entity.function = MEDIA_ENT_F_ATV_DECODER; - - res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads); - if (res < 0) - return res; - -#endif + res = tvp5150_mc_init(sd); + if (res) + goto err_cleanup_dt; res = tvp5150_detect_version(core); if (res < 0) - return res; + goto err_cleanup_dt; core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->detected_norm = V4L2_STD_UNKNOWN; @@ -1637,7 +1960,7 @@ static int tvp5150_probe(struct i2c_client *c, sd->ctrl_handler = &core->hdl; if (core->hdl.error) { res = core->hdl.error; - goto err; + goto err_free_v4l2_ctrls; } tvp5150_set_default(tvp5150_read_std(sd), &core->rect); @@ -1649,19 +1972,24 @@ static int tvp5150_probe(struct i2c_client *c, tvp5150_isr, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "tvp5150", core); if (res) - goto err; + goto err_free_v4l2_ctrls; } res = v4l2_async_register_subdev(sd); if (res < 0) - goto err; + goto err_free_v4l2_ctrls; if (debug > 1) tvp5150_log_status(sd); + return 0; -err: +err_free_v4l2_ctrls: v4l2_ctrl_handler_free(&core->hdl); +err_cleanup_dt: + if (IS_ENABLED(CONFIG_OF) && np) + tvp5150_dt_cleanup(core); + return res; } -- 2.20.1
