Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+sams...@kernel.org>
---
include/linux/platform_data/media/si4713.h | 4 ++--
include/media/davinci/dm355_ccdc.h | 4 ++--
include/media/davinci/dm644x_ccdc.h | 2 +-
include/media/drv-intf/exynos-fimc.h | 2 +-
include/media/drv-intf/saa7146.h | 2 +-
include/media/drv-intf/saa7146_vv.h | 4 ++--
include/media/dvb_frontend.h | 8 ++++----
include/media/rc-map.h | 4 ++--
include/media/v4l2-ctrls.h | 2 +-
include/media/v4l2-fwnode.h | 4 ++--
include/media/v4l2-subdev.h | 2 +-
include/media/videobuf-core.h | 2 +-
include/media/videobuf2-core.h | 2 +-
13 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/include/linux/platform_data/media/si4713.h
b/include/linux/platform_data/media/si4713.h
index 932668ad54f7..13b3eb7a9059 100644
--- a/include/linux/platform_data/media/si4713.h
+++ b/include/linux/platform_data/media/si4713.h
@@ -31,7 +31,7 @@ struct si4713_platform_data {
*/
struct si4713_rnl {
__u32 index; /* modulator index */
- __u32 frequency; /* frequency to peform rnl measurement */
+ __u32 frequency; /* frequency to perform rnl measurement */
__s32 rnl; /* result of measurement in dBuV */
__u32 reserved[4]; /* drivers and apps must init this to 0 */
};
@@ -40,7 +40,7 @@ struct si4713_rnl {
* This is the ioctl number to query for rnl. Users must pass a
* struct si4713_rnl pointer specifying desired frequency in 'frequency' field
* following driver capabilities (i.e V4L2_TUNER_CAP_LOW).
- * Driver must return measured value in the same struture, filling 'rnl' field.
+ * Driver must return measured value in the same structure, filling 'rnl'
field.
*/
#define SI4713_IOC_MEASURE_RNL _IOWR('V', BASE_VIDIOC_PRIVATE + 0, \
struct si4713_rnl)
diff --git a/include/media/davinci/dm355_ccdc.h
b/include/media/davinci/dm355_ccdc.h
index e6bc72f6b60f..1cba42d805fa 100644
--- a/include/media/davinci/dm355_ccdc.h
+++ b/include/media/davinci/dm355_ccdc.h
@@ -228,7 +228,7 @@ struct ccdc_config_params_raw {
/* Threshold of median filter */
int med_filt_thres;
/*
- * horz and vertical data offset. Appliable for defect correction
+ * horz and vertical data offset. Applicable for defect correction
* and lsc
*/
struct ccdc_data_offset data_offset;
@@ -238,7 +238,7 @@ struct ccdc_config_params_raw {
struct ccdc_black_clamp blk_clamp;
/* Structure for Black Compensation */
struct ccdc_black_compensation blk_comp;
- /* struture for vertical Defect Correction Module Configuration */
+ /* structure for vertical Defect Correction Module Configuration */
struct ccdc_vertical_dft vertical_dft;
/* structure for color space converter Module Configuration */
struct ccdc_csc csc;
diff --git a/include/media/davinci/dm644x_ccdc.h
b/include/media/davinci/dm644x_ccdc.h
index 6ea2ce241851..694fc8f6081f 100644
--- a/include/media/davinci/dm644x_ccdc.h
+++ b/include/media/davinci/dm644x_ccdc.h
@@ -152,7 +152,7 @@ struct ccdc_params_raw {
* order in memory(bottom to top)
*/
unsigned char image_invert_enable;
- /* configurable paramaters */
+ /* configurable parameters */
struct ccdc_config_params_raw config_params;
};
diff --git a/include/media/drv-intf/exynos-fimc.h
b/include/media/drv-intf/exynos-fimc.h
index f9c64338841f..54c214737142 100644
--- a/include/media/drv-intf/exynos-fimc.h
+++ b/include/media/drv-intf/exynos-fimc.h
@@ -81,7 +81,7 @@ struct fimc_source_info {
* v4l2_device notification id. This is only for internal use in the kernel.
* Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
* frame capture mode when there is only one VSYNC pulse issued by the sensor
- * at begining of the frame transmission.
+ * at beginning of the frame transmission.
*/
#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h
index a7bf2c4a2e4d..71ce63c99cb4 100644
--- a/include/media/drv-intf/saa7146.h
+++ b/include/media/drv-intf/saa7146.h
@@ -139,7 +139,7 @@ struct saa7146_dev
void *ext_priv; /* pointer for
extension private use (most likely some private data) */
struct saa7146_ext_vv *ext_vv_data;
- /* per device video/vbi informations (if available) */
+ /* per device video/vbi information (if available) */
struct saa7146_vv *vv_data;
void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
diff --git a/include/media/drv-intf/saa7146_vv.h
b/include/media/drv-intf/saa7146_vv.h
index 6f80fb7f31a5..b34d86bb0664 100644
--- a/include/media/drv-intf/saa7146_vv.h
+++ b/include/media/drv-intf/saa7146_vv.h
@@ -151,7 +151,7 @@ struct saa7146_vv
struct saa7146_ext_vv
{
- /* informations about the video capabilities of the device */
+ /* information about the video capabilities of the device */
int inputs;
int audios;
u32 capabilities;
@@ -241,7 +241,7 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int
bits);
#define SAA7146_CLIPPING_MASK 0x6
#define SAA7146_CLIPPING_MASK_INVERTED 0x7
-/* output formats: each entry holds four informations */
+/* output formats: each entry holds four information */
#define RGB08_COMPOSED 0x0217 /* composed is used in the sense of "not-planar"
*/
/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1),
format-mode = 7 */
#define RGB15_COMPOSED 0x0213
diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h
index 6f7a85ab3541..f05cd7b94a2c 100644
--- a/include/media/dvb_frontend.h
+++ b/include/media/dvb_frontend.h
@@ -160,7 +160,7 @@ enum dvbfe_algo {
* The frontend search for a signal failed
*
* @DVBFE_ALGO_SEARCH_INVALID:
- * The frontend search algorith was probably supplied with invalid
+ * The frontend search algorithm was probably supplied with invalid
* parameters and the search is an invalid one
*
* @DVBFE_ALGO_SEARCH_ERROR:
@@ -204,7 +204,7 @@ enum dvbfe_search {
* @set_config: callback function used to send some
tuner-specific
* parameters.
* @get_frequency: get the actual tuned frequency
- * @get_bandwidth: get the bandwitdh used by the low pass filters
+ * @get_bandwidth: get the bandwidth used by the low pass filters
* @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband,
* should return 0.
* @get_status: returns the frontend lock status
@@ -232,7 +232,7 @@ struct dvb_tuner_ops {
int (*suspend)(struct dvb_frontend *fe);
int (*resume)(struct dvb_frontend *fe);
- /* This is the recomended way to set the tuner */
+ /* This is the recommended way to set the tuner */
int (*set_params)(struct dvb_frontend *fe);
int (*set_analog_params)(struct dvb_frontend *fe, struct
analog_parameters *p);
@@ -358,7 +358,7 @@ struct dvb_frontend_internal_info {
* @release: callback function called when frontend is ready to be
* freed.
* drivers should free any allocated memory.
- * @release_sec: callback function requesting that the Satelite Equipment
+ * @release_sec: callback function requesting that the Satellite
Equipment
* Control (SEC) driver to release and free any memory
* allocated by the driver.
* @init: callback function used to initialize the tuner device.
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index d621acadfbf3..d2e689fd6b3e 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -136,14 +136,14 @@ struct rc_map_list {
/* Routines from rc-map.c */
/**
- * rc_map_register() - Registers a Remote Controler scancode map
+ * rc_map_register() - Registers a Remote Controller scancode map
*
* @map: pointer to struct rc_map_list
*/
int rc_map_register(struct rc_map_list *map);
/**
- * rc_map_unregister() - Unregisters a Remote Controler scancode map
+ * rc_map_unregister() - Unregisters a Remote Controller scancode map
*
* @map: pointer to struct rc_map_list
*/
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index d63cf227b0ab..e5cae37ced2d 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -648,7 +648,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct
v4l2_ctrl_handler *hdl,
* @def: The control's default value.
* @qmenu_int: The control's menu entries.
*
- * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionaly
+ * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionally
* takes as an argument an array of integers determining the menu items.
*
* If @id refers to a non-integer-menu control, then this function will
diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
index 6d9d9f1839ac..6c07825e18b9 100644
--- a/include/media/v4l2-fwnode.h
+++ b/include/media/v4l2-fwnode.h
@@ -143,7 +143,7 @@ struct v4l2_fwnode_link {
* @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default
* configuration in this case as the defaults are specific to a given bus type.
* This functionality is deprecated and should not be used in new drivers and
it
- * is only supported for CSI-2 D-PHY, parallel and Bt.656 busses.
+ * is only supported for CSI-2 D-PHY, parallel and Bt.656 buses.
*
* The function does not change the V4L2 fwnode endpoint state if it fails.
*
@@ -186,7 +186,7 @@ void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint
*vep);
* @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default
* configuration in this case as the defaults are specific to a given bus type.
* This functionality is deprecated and should not be used in new drivers and
it
- * is only supported for CSI-2 D-PHY, parallel and Bt.656 busses.
+ * is only supported for CSI-2 D-PHY, parallel and Bt.656 buses.
*
* The function does not change the V4L2 fwnode endpoint state if it fails.
*
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 34da094a3f40..349e1c18cf48 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -70,7 +70,7 @@ struct v4l2_decode_vbi_line {
* device. These devices are usually audio/video muxers/encoders/decoders or
* sensors and webcam controllers.
*
- * Usually these devices are controlled through an i2c bus, but other busses
+ * Usually these devices are controlled through an i2c bus, but other buses
* may also be used.
*
* The v4l2_subdev struct provides a way of accessing these devices in a
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 5684dc6f0d0d..2c4db97cd96f 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -43,7 +43,7 @@ struct videobuf_queue;
* (which v4l2 uses).
*
* If there is a valid mapping for a buffer, buffer->baddr/bsize holds
- * userspace address + size which can be feeded into the
+ * userspace address + size which can be fed into the
* videobuf_dma_init_user function listed above.
*
*/
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 06142c1469cc..fb0ea7a06cc9 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -396,7 +396,7 @@ struct vb2_buffer {
* @buf_queue: passes buffer vb to the driver; driver may start
* hardware operation on this buffer; driver should give
* the buffer back by calling vb2_buffer_done() function;
- * it is allways called after calling VIDIOC_STREAMON()
+ * it is always called after calling VIDIOC_STREAMON()
* ioctl; might be called before @start_streaming callback
* if user pre-queued buffers before calling
* VIDIOC_STREAMON().
--
2.20.1
