Hi Matt,
I'm merging this patch, but can you add a new patch that updates the entry for
this driver in the MAINTAINERS file with references to the relevant bindings
files?
I.e., for this one you add:
F: Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
but you need to add the panasonic bindings file as well.
Thanks!
Hans
On 12/11/18 4:17 PM, Matt Ranostay wrote:
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Matt Ranostay <matt.ranos...@konsulko.com>
> ---
> .../bindings/media/i2c/melexis,mlx90640.txt | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> new file mode 100644
> index 000000000000..060d2b7a5893
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
> @@ -0,0 +1,20 @@
> +* Melexis MLX90640 FIR Sensor
> +
> +Melexis MLX90640 FIR sensor support which allows recording of thermal data
> +with 32x24 resolution excluding 2 lines of coefficient data that is used by
> +userspace to render processed frames.
> +
> +Required Properties:
> + - compatible : Must be "melexis,mlx90640"
> + - reg : i2c address of the device
> +
> +Example:
> +
> + i2c0@1c22000 {
> + ...
> + mlx90640@33 {
> + compatible = "melexis,mlx90640";
> + reg = <0x33>;
> + };
> + ...
> + };
>
