Hi Jacopo,
On 06/01/2019 15:54, Jacopo Mondi wrote:
> The power_up_tx() procedure needs to set a few registers conditionally to
> the selected video source, but it currently checks for the provided tx to
> be either TXA or TXB.
>
> With the introduction of dynamic routing between HDMI and AFE entities to
> TXA, checking which TX the function is operating on is not meaningful anymore.
>
> To fix this, store the subdevice of the source providing video data to the
> CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
>
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> ---
> drivers/media/i2c/adv748x/adv748x-core.c | 2 +-
> drivers/media/i2c/adv748x/adv748x-csi2.c | 13 ++++++++++---
> drivers/media/i2c/adv748x/adv748x.h | 1 +
> 3 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c
> b/drivers/media/i2c/adv748x/adv748x-core.c
> index ad4e6424753a..200e00f93546 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -254,7 +254,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
> adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
>
> /* ADI Required Write */
> - if (is_txa(tx)) {
> + if (tx->src == &state->hdmi.sd) {
> adv748x_write_check(state, page, 0xdb, 0x10, &ret);
> adv748x_write_check(state, page, 0xd6, 0x07, &ret);
> } else {
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c
> b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 9d391d6f752e..de3944615e64 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -46,9 +46,16 @@ static int adv748x_csi2_register_link(struct adv748x_csi2
> *tx,
> return ret;
> }
>
> - return media_create_pad_link(&src->entity, src_pad,
> - &tx->sd.entity, ADV748X_CSI2_SINK,
> - enable ? MEDIA_LNK_FL_ENABLED : 0);
> + ret = media_create_pad_link(&src->entity, src_pad,
> + &tx->sd.entity, ADV748X_CSI2_SINK,
> + enable ? MEDIA_LNK_FL_ENABLED : 0);
> + if (ret)
> + return ret;
> +
> + if (enable)
> + tx->src = src;
> +
> + return 0;
> }
>
> /*
> -----------------------------------------------------------------------------
> diff --git a/drivers/media/i2c/adv748x/adv748x.h
> b/drivers/media/i2c/adv748x/adv748x.h
> index bc2da1b5ce29..d8d94053301b 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -84,6 +84,7 @@ struct adv748x_csi2 {
> struct media_pad pads[ADV748X_CSI2_NR_PADS];
> struct v4l2_ctrl_handler ctrl_hdl;
> struct v4l2_ctrl *pixel_rate;
> + struct v4l2_subdev *src;
> struct v4l2_subdev sd;
> };
>
>
--
Regards
--
Kieran
