The boards listed below use i2c device drivers and have
tuner_type equal TUNER_ABSENT. This means additional support
is required to enable the analog tuning capability, a case
statement is used to identify these models.
Models with analog tuning enabled:
- CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx (tested)
- CX231XX_BOARD_HAUPPAUGE_935C (tested)
- CX231XX_BOARD_HAUPPAUGE_955Q (tested)
- CX231XX_BOARD_HAUPPAUGE_975 (tested)
- CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD (untested)
The EvroMedia model was added, since it uses the si2157
tuner and the board profile claims it has analog inputs.
Signed-off-by: Brad Love <b...@nextdimension.cc>
---
drivers/media/usb/cx231xx/cx231xx-avcore.c | 35 ++++++++++++++----
drivers/media/usb/cx231xx/cx231xx-video.c | 57 ++++++++++++++++++++++++------
2 files changed, 76 insertions(+), 16 deletions(-)
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c
b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index fdd3c22..a6202a4 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -599,14 +599,27 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8
input)
return status;
}
}
- if (dev->tuner_type == TUNER_NXP_TDA18271)
+ switch (dev->model) { /* i2c device tuners */
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+ case CX231XX_BOARD_HAUPPAUGE_935C:
+ case CX231XX_BOARD_HAUPPAUGE_955Q:
+ case CX231XX_BOARD_HAUPPAUGE_975:
+ case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
status = cx231xx_set_decoder_video_input(dev,
CX231XX_VMUX_TELEVISION,
INPUT(input)->vmux);
- else
- status = cx231xx_set_decoder_video_input(dev,
+ break;
+ default:
+ if (dev->tuner_type == TUNER_NXP_TDA18271)
+ status = cx231xx_set_decoder_video_input(dev,
+ CX231XX_VMUX_TELEVISION,
+ INPUT(input)->vmux);
+ else
+ status = cx231xx_set_decoder_video_input(dev,
CX231XX_VMUX_COMPOSITE1,
INPUT(input)->vmux);
+ break;
+ };
break;
default:
@@ -1205,12 +1218,22 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev,
cx231xx_set_field(FLD_SIF_EN, 0));
break;
default:
+ switch (dev->model) { /* i2c device tuners */
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+ case CX231XX_BOARD_HAUPPAUGE_935C:
+ case CX231XX_BOARD_HAUPPAUGE_955Q:
+ case CX231XX_BOARD_HAUPPAUGE_975:
+ case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+ /* TODO: Normal mode: SIF passthrough at 14.32 MHz??? */
+ break;
+ default:
/* This is just a casual suggestion to people adding
new boards in case they use a tuner type we don't
currently know about */
- dev_info(dev->dev,
- "Unknown tuner type configuring SIF");
- break;
+ dev_info(dev->dev,
+ "Unknown tuner type configuring SIF");
+ break;
+ }
}
break;
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c
b/drivers/media/usb/cx231xx/cx231xx-video.c
index 0d451c4..d5e51a5 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -1293,7 +1293,7 @@ int cx231xx_s_frequency(struct file *file, void *priv,
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
struct v4l2_frequency new_freq = *f;
- int rc;
+ int rc, need_if_freq = 0;
u32 if_frequency = 5400000;
dev_dbg(dev->dev,
@@ -1310,14 +1310,30 @@ int cx231xx_s_frequency(struct file *file, void *priv,
/* set pre channel change settings in DIF first */
rc = cx231xx_tuner_pre_channel_change(dev);
- call_all(dev, tuner, s_frequency, f);
- call_all(dev, tuner, g_frequency, &new_freq);
- dev->ctl_freq = new_freq.frequency;
+ switch (dev->model) { /* i2c device tuners */
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+ case CX231XX_BOARD_HAUPPAUGE_935C:
+ case CX231XX_BOARD_HAUPPAUGE_955Q:
+ case CX231XX_BOARD_HAUPPAUGE_975:
+ case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+ if (dev->cx231xx_set_analog_freq)
+ dev->cx231xx_set_analog_freq(dev, f->frequency);
+ dev->ctl_freq = f->frequency;
+ need_if_freq = 1;
+ break;
+ default:
+ call_all(dev, tuner, s_frequency, f);
+ call_all(dev, tuner, g_frequency, &new_freq);
+ dev->ctl_freq = new_freq.frequency;
+ break;
+ }
+
+ pr_err("%s() %u : %u\n", __func__, f->frequency, dev->ctl_freq);
/* set post channel change settings in DIF first */
rc = cx231xx_tuner_post_channel_change(dev);
- if (dev->tuner_type == TUNER_NXP_TDA18271) {
+ if (need_if_freq || dev->tuner_type == TUNER_NXP_TDA18271) {
if (dev->norm & (V4L2_STD_MN | V4L2_STD_NTSC_443))
if_frequency = 5400000; /*5.4MHz */
else if (dev->norm & V4L2_STD_B)
@@ -1584,8 +1600,19 @@ int cx231xx_querycap(struct file *file, void *priv,
else
cap->device_caps |= V4L2_CAP_VIDEO_CAPTURE;
}
- if (dev->tuner_type != TUNER_ABSENT)
+ switch (dev->model) { /* i2c device tuners */
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+ case CX231XX_BOARD_HAUPPAUGE_935C:
+ case CX231XX_BOARD_HAUPPAUGE_955Q:
+ case CX231XX_BOARD_HAUPPAUGE_975:
+ case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
cap->device_caps |= V4L2_CAP_TUNER;
+ break;
+ default:
+ if (dev->tuner_type != TUNER_ABSENT)
+ cap->device_caps |= V4L2_CAP_TUNER;
+ break;
+ }
cap->capabilities = cap->device_caps | V4L2_CAP_READWRITE |
V4L2_CAP_VBI_CAPTURE | V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_STREAMING | V4L2_CAP_DEVICE_CAPS;
@@ -2191,10 +2218,20 @@ static void cx231xx_vdev_init(struct cx231xx *dev,
video_set_drvdata(vfd, dev);
if (dev->tuner_type == TUNER_ABSENT) {
- v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY);
- v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY);
- v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER);
- v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER);
+ switch (dev->model) {
+ case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+ case CX231XX_BOARD_HAUPPAUGE_935C:
+ case CX231XX_BOARD_HAUPPAUGE_955Q:
+ case CX231XX_BOARD_HAUPPAUGE_975:
+ case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+ break;
+ default:
+ v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY);
+ v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY);
+ v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER);
+ v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER);
+ break;
+ }
}
}
--
2.7.4
