Hi Jernej,
On Tue, Nov 27, 2018 at 06:23:10PM +0100, Jernej Škrabec wrote:
> > @@ -1156,4 +1164,162 @@ struct v4l2_ctrl_mpeg2_quantization {
> > __u8 chroma_non_intra_quantiser_matrix[64];
> > };
> >
> > +/* Compounds controls */
> > +
> > +#define V4L2_H264_SPS_CONSTRAINT_SET0_FLAG 0x01
> > +#define V4L2_H264_SPS_CONSTRAINT_SET1_FLAG 0x02
> > +#define V4L2_H264_SPS_CONSTRAINT_SET2_FLAG 0x04
> > +#define V4L2_H264_SPS_CONSTRAINT_SET3_FLAG 0x08
> > +#define V4L2_H264_SPS_CONSTRAINT_SET4_FLAG 0x10
> > +#define V4L2_H264_SPS_CONSTRAINT_SET5_FLAG 0x20
>
> How are these constraint flags meant to be used?
They are supposed to be used as bit fields in the constraint_set_flags
variable part of the v4l2_ctrl_h264_sps structure.
> > +
> > +#define V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE 0x01
> > +#define V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS 0x02
> > +#define V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO 0x04
> > +#define V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED 0x08
> > +#define V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY 0x10
> > +#define V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD 0x20
> > +#define V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE 0x40
> > +
> > +struct v4l2_ctrl_h264_sps {
> > + __u8 profile_idc;
> > + __u8 constraint_set_flags;
> > + __u8 level_idc;
> > + __u8 seq_parameter_set_id;
> > + __u8 chroma_format_idc;
> > + __u8 bit_depth_luma_minus8;
> > + __u8 bit_depth_chroma_minus8;
> > + __u8 log2_max_frame_num_minus4;
> > + __u8 pic_order_cnt_type;
> > + __u8 log2_max_pic_order_cnt_lsb_minus4;
> > + __u8 max_num_ref_frames;
> > + __u8 num_ref_frames_in_pic_order_cnt_cycle;
> > + __s32 offset_for_ref_frame[255];
> > + __s32 offset_for_non_ref_pic;
> > + __s32 offset_for_top_to_bottom_field;
> > + __u16 pic_width_in_mbs_minus1;
> > + __u16 pic_height_in_map_units_minus1;
> > + __u8 flags;
> > +};
> > +
> > +#define V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE
> > 0x0001
> > +#define V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT 0x0002
> > +#define V4L2_H264_PPS_FLAG_WEIGHTED_PRED 0x0004
> > +#define V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT
> > 0x0008
> > +#define V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED 0x0010
> > +#define V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT
> > 0x0020
> > +#define V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE
> > 0x0040
> > +#define V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT
> > 0x0080
> > +
> > +struct v4l2_ctrl_h264_pps {
> > + __u8 pic_parameter_set_id;
> > + __u8 seq_parameter_set_id;
> > + __u8 num_slice_groups_minus1;
> > + __u8 num_ref_idx_l0_default_active_minus1;
> > + __u8 num_ref_idx_l1_default_active_minus1;
> > + __u8 weighted_bipred_idc;
> > + __s8 pic_init_qp_minus26;
> > + __s8 pic_init_qs_minus26;
> > + __s8 chroma_qp_index_offset;
> > + __s8 second_chroma_qp_index_offset;
> > + __u8 flags;
> > +};
> > +
> > +struct v4l2_ctrl_h264_scaling_matrix {
> > + __u8 scaling_list_4x4[6][16];
> > + __u8 scaling_list_8x8[6][64];
> > +};
> > +
> > +struct v4l2_h264_weight_factors {
> > + __s8 luma_weight[32];
> > + __s8 luma_offset[32];
> > + __s8 chroma_weight[32][2];
> > + __s8 chroma_offset[32][2];
> > +};
>
> Regarding weight type __s8 - isn't too small just a bit?
>
> ITU-T Rec. H264 (05/2003) says that this field has value between -128 to 127
> if
> weight flag is set. That fits perfectly. However, when weight flag is 0,
> default
> value is 2^luma_log2_weight_denom (for example). luma_log2_weight_denom can
> have values between 0 and 7, which means that weight will have values from 1
> to 128. That is just slightly over the max value for __s8.
luma_log2_weight_denom is in the v4l2_h264_pred_weight_table
structure, so you wouldn't use the weights if the weight flag isn't
set.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
signature.asc
Description: PGP signature
