On Tue, 09 Oct 2018, Vladimir Zapolskiy wrote: > From: Vladimir Zapolskiy <vladimir_zapols...@mentor.com> > > The change adds TI DS90Ux9xx I2C bridge/alias subdevice driver and > FPD Link connection handling mechanism. > > Access to I2C devices connected to a remote de-/serializer is done in > a transparent way, on established link detection event such devices > are registered on an I2C bus, which serves a local de-/serializer IC. > > The development of the driver was a collaborative work, the > contribution done by Balasubramani Vivekanandan includes: > * original simplistic implementation of the driver, > * support of implicitly specified devices in device tree, > * support of multiple FPD links for TI DS90Ux9xx, > * other kind of valuable review comments, clean-ups and fixes. > > Also Steve Longerbeam made the following changes: > * clear address maps after linked device removal, > * disable pass-through in disconnection, > * qualify locked status with non-zero remote address. > > Signed-off-by: Vladimir Zapolskiy <vladimir_zapols...@mentor.com> > --- > drivers/mfd/Kconfig | 8 + > drivers/mfd/Makefile | 1 + > drivers/mfd/ds90ux9xx-i2c-bridge.c | 764 +++++++++++++++++++++++++++++ > 3 files changed, 773 insertions(+) > create mode 100644 drivers/mfd/ds90ux9xx-i2c-bridge.c
Shouldn't this live in drivers/i2c? -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
