Hi Marco, Enrico,
On Mon, Oct 29, 2018 at 07:24:08PM +0100, Marco Felsch wrote:
> From: Enrico Scholz <enrico.sch...@sigma-chemnitz.de>
>
> The chip can be configured to output data transitions on the
> rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
> falling edge.
>
> Parsing the fw-node is made in a subfunction to bundle all (future)
> dt-parsing / fw-parsing stuff.
>
> Signed-off-by: Enrico Scholz <enrico.sch...@sigma-chemnitz.de>
> (m.grzesc...@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
> per default. Set bit to 0 (enable mask bit without value) to enable
> falling edge sampling.)
> Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
> (m.fel...@pengutronix.de: use fwnode helpers)
> (m.fel...@pengutronix.de: mv fw parsing into own function)
> (m.fel...@pengutronix.de: adapt commit msg)
> Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
>
> ---
> Changelog:
>
> v2:
> - make use of fwnode_*() to drop OF dependency and ifdef's
> - mt9m111_g_mbus_config: fix pclk_sample logic which I made due the
> conversion from Enrico's patch.
>
> drivers/media/i2c/mt9m111.c | 46 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 45 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> index e9879e111f58..112eaa5ba917 100644
> --- a/drivers/media/i2c/mt9m111.c
> +++ b/drivers/media/i2c/mt9m111.c
> @@ -15,12 +15,14 @@
> #include <linux/delay.h>
> #include <linux/v4l2-mediabus.h>
> #include <linux/module.h>
> +#include <linux/property.h>
>
> #include <media/v4l2-async.h>
> #include <media/v4l2-clk.h>
> #include <media/v4l2-common.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
>
> /*
> * MT9M111, MT9M112 and MT9M131:
> @@ -239,6 +241,8 @@ struct mt9m111 {
> const struct mt9m111_datafmt *fmt;
> int lastpage; /* PageMap cache value */
> bool is_streaming;
> + /* user point of view - 0: falling 1: rising edge */
> + unsigned int pclk_sample:1;
You could use a bool. Up to you.
> #ifdef CONFIG_MEDIA_CONTROLLER
> struct media_pad pad;
> #endif
> @@ -591,6 +595,10 @@ static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
> return -EINVAL;
> }
>
> + /* receiver samples on falling edge, chip-hw default is rising */
> + if (mt9m111->pclk_sample == 0)
> + mask_outfmt2 |= MT9M111_OUTFMT_INV_PIX_CLOCK;
> +
> ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2,
> data_outfmt2, mask_outfmt2);
> if (!ret)
> @@ -1051,9 +1059,15 @@ static int mt9m111_s_stream(struct v4l2_subdev *sd,
> int enable)
> static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
> struct v4l2_mbus_config *cfg)
> {
> - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
> + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
> +
> + cfg->flags = V4L2_MBUS_MASTER |
> V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> V4L2_MBUS_DATA_ACTIVE_HIGH;
> +
> + cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_RISING :
> + V4L2_MBUS_PCLK_SAMPLE_FALLING;
> +
> cfg->type = V4L2_MBUS_PARALLEL;
>
> return 0;
> @@ -1123,6 +1137,32 @@ static int mt9m111_video_probe(struct i2c_client
> *client)
> return ret;
> }
>
> +static int mt9m111_probe_fw(struct i2c_client *client, struct mt9m111
> *mt9m111)
> +{
> + struct v4l2_fwnode_endpoint *bus_cfg;
> + struct fwnode_handle *np;
> + int ret = 0;
> +
> + np = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
> + if (!np)
> + return -EINVAL;
> +
> + bus_cfg = v4l2_fwnode_endpoint_alloc_parse(np);
> + if (IS_ERR(bus_cfg)) {
> + ret = PTR_ERR(bus_cfg);
> + goto out_put_fw;
> + }
> +
> + mt9m111->pclk_sample = !!(bus_cfg->bus.parallel.flags &
> + V4L2_MBUS_PCLK_SAMPLE_RISING);
> +
> + v4l2_fwnode_endpoint_free(bus_cfg);
> +
> +out_put_fw:
> + fwnode_handle_put(np);
> + return ret;
> +}
> +
> static int mt9m111_probe(struct i2c_client *client,
> const struct i2c_device_id *did)
> {
> @@ -1147,6 +1187,10 @@ static int mt9m111_probe(struct i2c_client *client,
> /* Default HIGHPOWER context */
> mt9m111->ctx = &context_b;
>
> + ret = mt9m111_probe_fw(client, mt9m111);
> + if (ret)
> + return ret;
Can you do this before v4l2_clk_get()? That'll go anyway, but for now,
you'd need extra error handling for it.
> +
> v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
> mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>
Please also put this patch after the DT binding changes.
--
Kind regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi
