On Fri, Mar 30, 2018 at 11:15 AM Yong Zhi <[email protected]> wrote:
>
> From: Tomasz Figa <[email protected]>
>
> This driver translates IO virtual address to physical
> address based on two levels page tables.
>
> Signed-off-by: Tomasz Figa <[email protected]>
> Signed-off-by: Yong Zhi <[email protected]>
> ---
> drivers/media/pci/intel/ipu3/ipu3-mmu.c | 560
> ++++++++++++++++++++++++++++++++
> drivers/media/pci/intel/ipu3/ipu3-mmu.h | 28 ++
> 2 files changed, 588 insertions(+)
> create mode 100644 drivers/media/pci/intel/ipu3/ipu3-mmu.c
> create mode 100644 drivers/media/pci/intel/ipu3/ipu3-mmu.h
>
> diff --git a/drivers/media/pci/intel/ipu3/ipu3-mmu.c
> b/drivers/media/pci/intel/ipu3/ipu3-mmu.c
> new file mode 100644
> index 000000000000..a4b3e1680bbb
> --- /dev/null
> +++ b/drivers/media/pci/intel/ipu3/ipu3-mmu.c
> @@ -0,0 +1,560 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Intel Corporation.
> + * Copyright (C) 2018 Google, Inc.
I followed wrong guide when adding this one. Could you fix it up to
the following?
Copyright 2018 Google LLC.
[snip]
> +/**
> + * ipu3_mmu_exit() - clean up IPU3 MMU block
> + * @mmu: IPU3 MMU private data
> + */
> +void ipu3_mmu_exit(struct ipu3_mmu_info *info)
> +{
> + struct ipu3_mmu *mmu = to_ipu3_mmu(info);
> +
> + /* We are going to free our page tables, no more memory access. */
> + ipu3_mmu_set_halt(mmu, true);
> + ipu3_mmu_tlb_invalidate(mmu);
> +
> + ipu3_mmu_free_page_table(mmu->l1pt);
> + vfree(mmu->l2pts);
> + ipu3_mmu_free_page_table(mmu->dummy_l2pt);
> + kfree(mmu->dummy_page);
Should be free_page(). (Might be already included in your tree as per
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/1084522)
> + kfree(mmu);
> +}
> +
> +void ipu3_mmu_suspend(struct ipu3_mmu_info *info)
> +{
> + struct ipu3_mmu *mmu = to_ipu3_mmu(info);
> +
> + ipu3_mmu_set_halt(mmu, true);
> +}
> +
> +void ipu3_mmu_resume(struct ipu3_mmu_info *info)
> +{
> + struct ipu3_mmu *mmu = to_ipu3_mmu(info);
> + u32 pteval;
> +
> + ipu3_mmu_set_halt(mmu, true);
> +
> + pteval = IPU3_ADDR2PTE(virt_to_phys(mmu->l1pt));
> + writel(pteval, mmu->base + REG_L1_PHYS);
> +
> + ipu3_mmu_tlb_invalidate(mmu);
> + ipu3_mmu_set_halt(mmu, false);
> +}
> diff --git a/drivers/media/pci/intel/ipu3/ipu3-mmu.h
> b/drivers/media/pci/intel/ipu3/ipu3-mmu.h
> new file mode 100644
> index 000000000000..4976187c18f6
> --- /dev/null
> +++ b/drivers/media/pci/intel/ipu3/ipu3-mmu.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (C) 2018 Intel Corporation */
> +/* Copyright (C) 2018 Google, Inc. */
> +
> +#ifndef __IPU3_MMU_H
> +#define __IPU3_MMU_H
> +
> +struct ipu3_mmu_info {
> + dma_addr_t aperture_start; /* First address that can be mapped */
> + dma_addr_t aperture_end; /* Last address that can be mapped */
> + unsigned long pgsize_bitmap; /* Bitmap of page sizes in use */
If documenting the fields, why not use a kerneldoc comment above the
struct instead?
Best regards,
Tomasz
