Hi Sakari, thanks for the clarification, please ignore my comment then. Thanks j
On Mon, May 14, 2018 at 12:49:19PM +0300, Sakari Ailus wrote:
> Hi Jacopo,
>
> On Mon, May 14, 2018 at 11:06:46AM +0200, jacopo mondi wrote:
> > Hi Akinobu,
> >
> > a small nit below
> >
> > On Sun, May 06, 2018 at 11:19:27PM +0900, Akinobu Mita wrote:
> > > The set_fmt() in subdev pad ops, the s_ctrl() for subdev control handler,
> > > and the s_frame_interval() in subdev video ops could be called when the
> > > device is under power saving mode. These callbacks for ov772x driver
> > > cause updating H/W registers that will fail under power saving mode.
> > >
> > > This avoids it by not apply any changes to H/W if the device is not
> > > powered
> > > up. Instead the changes will be restored right after power-up.
> > >
> > > Cc: Jacopo Mondi <jacopo+rene...@jmondi.org>
> > > Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> > > Cc: Hans Verkuil <hans.verk...@cisco.com>
> > > Cc: Sakari Ailus <sakari.ai...@linux.intel.com>
> > > Cc: Mauro Carvalho Chehab <mche...@s-opensource.com>
> > > Signed-off-by: Akinobu Mita <akinobu.m...@gmail.com>
> > > ---
> > > * v5
> > > - No changes
> > >
> > > drivers/media/i2c/ov772x.c | 79
> > > +++++++++++++++++++++++++++++++++++++---------
> > > 1 file changed, 64 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> > > index 9292a18..262a7e5 100644
> > > --- a/drivers/media/i2c/ov772x.c
> > > +++ b/drivers/media/i2c/ov772x.c
> > > @@ -741,19 +741,30 @@ static int ov772x_s_frame_interval(struct
> > > v4l2_subdev *sd,
> > > struct ov772x_priv *priv = to_ov772x(sd);
> > > struct v4l2_fract *tpf = &ival->interval;
> > > unsigned int fps;
> > > - int ret;
> > > + int ret = 0;
> > >
> > > fps = ov772x_select_fps(priv, tpf);
> > >
> > > - ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
> > > - if (ret)
> > > - return ret;
> > > + mutex_lock(&priv->lock);
> > > + /*
> > > + * If the device is not powered up by the host driver do
> > > + * not apply any changes to H/W at this time. Instead
> > > + * the frame rate will be restored right after power-up.
> > > + */
> > > + if (priv->power_count > 0) {
> > > + ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
> > > + if (ret)
> > > + goto error;
> > > + }
> > >
> > > tpf->numerator = 1;
> > > tpf->denominator = fps;
> > > priv->fps = fps;
> > >
> > > - return 0;
> > > +error:
> > > + mutex_unlock(&priv->lock);
> > > +
> > > + return ret;
> > > }
> > >
> > > static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
> > > @@ -765,6 +776,16 @@ static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
> > > int ret = 0;
> > > u8 val;
> > >
> > > + /* v4l2_ctrl_lock() locks our own mutex */
> > > +
> > > + /*
> > > + * If the device is not powered up by the host driver do
> > > + * not apply any controls to H/W at this time. Instead
> > > + * the controls will be restored right after power-up.
> > > + */
> > > + if (priv->power_count == 0)
> > > + return 0;
> > > +
> > > switch (ctrl->id) {
> > > case V4L2_CID_VFLIP:
> > > val = ctrl->val ? VFLIP_IMG : 0x00;
> > > @@ -885,6 +906,10 @@ static int ov772x_power_off(struct ov772x_priv *priv)
> > > return 0;
> > > }
> > >
> > > +static int ov772x_set_params(struct ov772x_priv *priv,
> > > + const struct ov772x_color_format *cfmt,
> > > + const struct ov772x_win_size *win);
> > > +
> > > static int ov772x_s_power(struct v4l2_subdev *sd, int on)
> > > {
> > > struct ov772x_priv *priv = to_ov772x(sd);
> > > @@ -895,8 +920,20 @@ static int ov772x_s_power(struct v4l2_subdev *sd,
> > > int on)
> > > /* If the power count is modified from 0 to != 0 or from != 0 to 0,
> > > * update the power state.
> > > */
> > > - if (priv->power_count == !on)
> > > - ret = on ? ov772x_power_on(priv) : ov772x_power_off(priv);
> > > + if (priv->power_count == !on) {
> > > + if (on) {
> > > + ret = ov772x_power_on(priv);
> > > + /*
> > > + * Restore the format, the frame rate, and
> > > + * the controls
> > > + */
> > > + if (!ret)
> > > + ret = ov772x_set_params(priv, priv->cfmt,
> > > + priv->win);
> > > + } else {
> > > + ret = ov772x_power_off(priv);
> > > + }
> > > + }
> > >
> > > if (!ret) {
> > > /* Update the power count. */
> > > @@ -1163,7 +1200,7 @@ static int ov772x_set_fmt(struct v4l2_subdev *sd,
> > > struct v4l2_mbus_framefmt *mf = &format->format;
> > > const struct ov772x_color_format *cfmt;
> > > const struct ov772x_win_size *win;
> > > - int ret;
> > > + int ret = 0;
> > >
> > > if (format->pad)
> > > return -EINVAL;
> > > @@ -1184,14 +1221,24 @@ static int ov772x_set_fmt(struct v4l2_subdev *sd,
> > > return 0;
> > > }
> > >
> > > - ret = ov772x_set_params(priv, cfmt, win);
> > > - if (ret < 0)
> > > - return ret;
> > > -
> > > + mutex_lock(&priv->lock);
> > > + /*
> > > + * If the device is not powered up by the host driver do
> > > + * not apply any changes to H/W at this time. Instead
> > > + * the format will be restored right after power-up.
> > > + */
> > > + if (priv->power_count > 0) {
> > > + ret = ov772x_set_params(priv, cfmt, win);
> > > + if (ret < 0)
> > > + goto error;
> > > + }
> > > priv->win = win;
> > > priv->cfmt = cfmt;
> > >
> > > - return 0;
> > > +error:
> > > + mutex_unlock(&priv->lock);
> > > +
> > > + return ret;
> > > }
> > >
> > > static int ov772x_video_probe(struct ov772x_priv *priv)
> > > @@ -1201,7 +1248,7 @@ static int ov772x_video_probe(struct ov772x_priv
> > > *priv)
> > > const char *devname;
> > > int ret;
> > >
> > > - ret = ov772x_s_power(&priv->subdev, 1);
> > > + ret = ov772x_power_on(priv);
> > > if (ret < 0)
> > > return ret;
> > >
> > > @@ -1241,7 +1288,7 @@ static int ov772x_video_probe(struct ov772x_priv
> > > *priv)
> > > ret = v4l2_ctrl_handler_setup(&priv->hdl);
> > >
> > > done:
> > > - ov772x_s_power(&priv->subdev, 0);
> > > + ov772x_power_off(priv);
> > >
> > > return ret;
> > > }
> > > @@ -1340,6 +1387,8 @@ static int ov772x_probe(struct i2c_client *client,
> > >
> > > v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
> > > v4l2_ctrl_handler_init(&priv->hdl, 3);
> > > + /* Use our mutex for the controls */
> > > + priv->hdl.lock = &priv->lock;
> >
> > Isn't this unrelated?
>
> AFAICT not, since the access to power count is serialised using the
> driver's mutex. The power count is used in the s_ctrl callback as well.
>
> >
> > Apart from that,
> >
> > Reviewed-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> >
> > Thanks
> > j
> >
> >
> > > priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
> > > V4L2_CID_VFLIP, 0, 1, 1, 0);
> > > priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
> > > --
> > > 2.7.4
> > >
>
>
>
> --
> Sakari Ailus
> sakari.ai...@linux.intel.com
signature.asc
Description: PGP signature
