On Fri, Apr 20, 2018 at 11:44:19AM +0200, Daniel Mack wrote:
> Allow setting the xclk rate via an optional 'clock-frequency' property in
> the device tree node.
>
> Signed-off-by: Daniel Mack <dan...@zonque.org>
> ---
> Documentation/devicetree/bindings/media/i2c/ov5640.txt | 2 ++
> drivers/media/i2c/ov5640.c | 10 ++++++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
> b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
> index 8e36da0d8406..584bbc944978 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
> @@ -13,6 +13,8 @@ Optional Properties:
> This is an active low signal to the OV5640.
> - powerdown-gpios: reference to the GPIO connected to the powerdown pin,
> if any. This is an active high signal to the OV5640.
> +- clock-frequency: frequency to set on the xclk input clock. The clock
> + is left untouched if this property is missing.
>
> The device node must contain one 'port' child node for its digital output
> video port, in accordance with the video interface bindings defined in
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index 78669ed386cd..2d94d6dbda5d 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -2685,6 +2685,7 @@ static int ov5640_probe(struct i2c_client *client,
> struct fwnode_handle *endpoint;
> struct ov5640_dev *sensor;
> struct v4l2_mbus_framefmt *fmt;
> + u32 freq;
> int ret;
>
> sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
> @@ -2731,6 +2732,15 @@ static int ov5640_probe(struct i2c_client *client,
> return PTR_ERR(sensor->xclk);
> }
>
> + ret = of_property_read_u32(dev->of_node, "clock-frequency", &freq);
Please use
ret = fwnode_property_read_u32(dev_fwnode(dev), ...);
Thanks.
> + if (ret == 0) {
> + ret = clk_set_rate(sensor->xclk, freq);
> + if (ret) {
> + dev_err(dev, "could not set xclk frequency\n");
> + return ret;
> + }
> + }
> +
> sensor->xclk_freq = clk_get_rate(sensor->xclk);
> if (sensor->xclk_freq < OV5640_XCLK_MIN ||
> sensor->xclk_freq > OV5640_XCLK_MAX) {
> --
> 2.14.3
>
--
Sakari Ailus
e-mail: sakari.ai...@iki.fi
