Hi Matthias,
On 2018-04-19 12:09, Matthias Schwarzott wrote:
> Am 17.04.2018 um 18:39 schrieb Brad Love:
>> Mostly very straight forward replace of blocks with equivalent code.
>>
>> Cleanup added at end of dvb_init in case of failure.
>>
> Hi Brad,
>
> I have some suggestions. See below.
>
> Matthias
Thanks for the review, I'll work your suggestions into a v2 set soon.
>
>> Signed-off-by: Brad Love <b...@nextdimension.cc>
>> ---
>> drivers/media/usb/cx231xx/cx231xx-dvb.c | 331
>> ++++++++------------------------
>> 1 file changed, 82 insertions(+), 249 deletions(-)
>>
>> diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c
>> b/drivers/media/usb/cx231xx/cx231xx-dvb.c
>> index 681610f..318a6cd 100644
>> --- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
>> +++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
>> @@ -613,23 +613,18 @@ static void unregister_dvb(struct cx231xx_dvb *dvb)
>> dvb_frontend_detach(dvb->frontend[1]);
>> dvb_frontend_detach(dvb->frontend[0]);
>> dvb_unregister_adapter(&dvb->adapter);
>> +
>> /* remove I2C tuner */
>> client = dvb->i2c_client_tuner;
>> - if (client) {
>> - module_put(client->dev.driver->owner);
>> - i2c_unregister_device(client);
>> - }
>> - /* remove I2C demod */
>> + if (client)
>> + dvb_module_release(client);
> The pointer check is not needed, dvb_module_release does check itself
> for NULL.
>
> Other drivers added code to set the client-pointers to NULL after
> releasing it.
>
> I suggest to do it like this:
> /* remove I2C tuner */
> dvb_module_release(dvb->i2c_client_tuner);
> dvb->i2c_client_tuner = NULL;
>
>
>> + /* remove I2C demod(s) */
>> client = dvb->i2c_client_demod[1];
>> - if (client) {
>> - module_put(client->dev.driver->owner);
>> - i2c_unregister_device(client);
>> - }
>> + if (client)
>> + dvb_module_release(client);
>> client = dvb->i2c_client_demod[0];
>> - if (client) {
>> - module_put(client->dev.driver->owner);
>> - i2c_unregister_device(client);
>> - }
>> + if (client)
>> + dvb_module_release(client);
>> }
>>
>> static int dvb_init(struct cx231xx *dev)
>> @@ -638,6 +633,8 @@ static int dvb_init(struct cx231xx *dev)
>> struct cx231xx_dvb *dvb;
>> struct i2c_adapter *tuner_i2c;
>> struct i2c_adapter *demod_i2c;
>> + struct i2c_client *client;
>> + struct i2c_adapter *adapter;
>>
>> if (!dev->board.has_dvb) {
>> /* This device does not support the extension */
>> @@ -785,8 +782,6 @@ static int dvb_init(struct cx231xx *dev)
>>
>> case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
>> {
>> - struct i2c_client *client;
>> - struct i2c_board_info info;
>> struct si2165_platform_data si2165_pdata = {};
>>
>> /* attach demod */
>> @@ -794,25 +789,14 @@ static int dvb_init(struct cx231xx *dev)
>> si2165_pdata.chip_mode = SI2165_MODE_PLL_XTAL;
>> si2165_pdata.ref_freq_hz = 16000000;
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> - strlcpy(info.type, "si2165", I2C_NAME_SIZE);
>> - info.addr = dev->board.demod_addr;
>> - info.platform_data = &si2165_pdata;
>> - request_module(info.type);
>> - client = i2c_new_device(demod_i2c, &info);
>> - if (!client || !client->dev.driver || !dev->dvb->frontend[0]) {
>> - dev_err(dev->dev,
>> - "Failed to attach SI2165 front end\n");
>> - result = -EINVAL;
>> - goto out_free;
>> - }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2165", NULL, demod_i2c,
>> + dev->board.demod_addr,
>> + &si2165_pdata);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> dvb->i2c_client_demod[0] = client;
>>
>> dev->dvb->frontend[0]->ops.i2c_gate_ctrl = NULL;
>> @@ -829,8 +813,6 @@ static int dvb_init(struct cx231xx *dev)
>> }
>> case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
>> {
>> - struct i2c_client *client;
>> - struct i2c_board_info info;
>> struct si2165_platform_data si2165_pdata = {};
>> struct si2157_config si2157_config = {};
>>
>> @@ -839,29 +821,16 @@ static int dvb_init(struct cx231xx *dev)
>> si2165_pdata.chip_mode = SI2165_MODE_PLL_EXT;
>> si2165_pdata.ref_freq_hz = 24000000;
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> - strlcpy(info.type, "si2165", I2C_NAME_SIZE);
>> - info.addr = dev->board.demod_addr;
>> - info.platform_data = &si2165_pdata;
>> - request_module(info.type);
>> - client = i2c_new_device(demod_i2c, &info);
>> - if (!client || !client->dev.driver || !dev->dvb->frontend[0]) {
>> - dev_err(dev->dev,
>> - "Failed to attach SI2165 front end\n");
>> - result = -EINVAL;
>> - goto out_free;
>> - }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2165", NULL, demod_i2c,
>> + dev->board.demod_addr,
>> + &si2165_pdata);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> dvb->i2c_client_demod[0] = client;
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> -
>> dev->dvb->frontend[0]->ops.i2c_gate_ctrl = NULL;
>>
>> /* define general-purpose callback pointer */
>> @@ -874,27 +843,15 @@ static int dvb_init(struct cx231xx *dev)
>> #endif
>> si2157_config.if_port = 1;
>> si2157_config.inversion = true;
>> - strlcpy(info.type, "si2157", I2C_NAME_SIZE);
>> - info.addr = dev->board.tuner_addr;
>> - info.platform_data = &si2157_config;
>> - request_module("si2157");
>> -
>> - client = i2c_new_device(
>> - tuner_i2c,
>> - &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> - dvb_frontend_detach(dev->dvb->frontend[0]);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>>
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> - dvb_frontend_detach(dev->dvb->frontend[0]);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2157", NULL, tuner_i2c,
>> + dev->board.tuner_addr,
>> + &si2157_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> dev->cx231xx_reset_analog_tuner = NULL;
>>
>> dev->dvb->i2c_client_tuner = client;
>> @@ -902,12 +859,8 @@ static int dvb_init(struct cx231xx *dev)
>> }
>> case CX231XX_BOARD_HAUPPAUGE_955Q:
>> {
>> - struct i2c_client *client;
>> - struct i2c_board_info info;
>> struct si2157_config si2157_config = {};
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> -
>> dev->dvb->frontend[0] = dvb_attach(lgdt3306a_attach,
>> &hauppauge_955q_lgdt3306a_config,
>> demod_i2c
>> @@ -932,27 +885,15 @@ static int dvb_init(struct cx231xx *dev)
>> #endif
>> si2157_config.if_port = 1;
>> si2157_config.inversion = true;
>> - strlcpy(info.type, "si2157", I2C_NAME_SIZE);
>> - info.addr = dev->board.tuner_addr;
>> - info.platform_data = &si2157_config;
>> - request_module("si2157");
>> -
>> - client = i2c_new_device(
>> - tuner_i2c,
>> - &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> - dvb_frontend_detach(dev->dvb->frontend[0]);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>>
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> - dvb_frontend_detach(dev->dvb->frontend[0]);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2157", NULL, tuner_i2c,
>> + dev->board.tuner_addr,
>> + &si2157_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> dev->cx231xx_reset_analog_tuner = NULL;
>>
>> dev->dvb->i2c_client_tuner = client;
>> @@ -988,9 +929,6 @@ static int dvb_init(struct cx231xx *dev)
>> {
>> struct si2157_config si2157_config = {};
>> struct si2168_config si2168_config = {};
>> - struct i2c_board_info info = {};
>> - struct i2c_client *client;
>> - struct i2c_adapter *adapter;
>>
>> /* attach demodulator chip */
>> si2168_config.ts_mode = SI2168_TS_SERIAL; /* from *.inf file */
>> @@ -998,24 +936,14 @@ static int dvb_init(struct cx231xx *dev)
>> si2168_config.i2c_adapter = &adapter;
>> si2168_config.ts_clock_inv = true;
>>
>> - strlcpy(info.type, "si2168", sizeof(info.type));
>> - info.addr = dev->board.demod_addr;
>> - info.platform_data = &si2168_config;
>> -
>> - request_module(info.type);
>> - client = i2c_new_device(demod_i2c, &info);
>> -
>> - if (client == NULL || client->dev.driver == NULL) {
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2168", NULL, demod_i2c,
>> + dev->board.demod_addr,
>> + &si2168_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> dvb->i2c_client_demod[0] = client;
>>
>> /* attach tuner chip */
>> @@ -1026,37 +954,20 @@ static int dvb_init(struct cx231xx *dev)
>> si2157_config.if_port = 1;
>> si2157_config.inversion = false;
>>
>> - memset(&info, 0, sizeof(info));
>> - strlcpy(info.type, "si2157", sizeof(info.type));
>> - info.addr = dev->board.tuner_addr;
>> - info.platform_data = &si2157_config;
>> -
>> - request_module(info.type);
>> - client = i2c_new_device(tuner_i2c, &info);
>> -
>> - if (client == NULL || client->dev.driver == NULL) {
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2157", NULL, tuner_i2c,
>> + dev->board.tuner_addr,
>> + &si2157_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> dev->cx231xx_reset_analog_tuner = NULL;
>> dev->dvb->i2c_client_tuner = client;
>> break;
>> }
>> case CX231XX_BOARD_ASTROMETA_T2HYBRID:
>> {
>> - struct i2c_client *client;
>> - struct i2c_board_info info = {};
>> struct mn88473_config mn88473_config = {};
>>
>> /* attach demodulator chip */
>> @@ -1064,24 +975,14 @@ static int dvb_init(struct cx231xx *dev)
>> mn88473_config.xtal = 25000000;
>> mn88473_config.fe = &dev->dvb->frontend[0];
>>
>> - strlcpy(info.type, "mn88473", sizeof(info.type));
>> - info.addr = dev->board.demod_addr;
>> - info.platform_data = &mn88473_config;
>> -
>> - request_module(info.type);
>> - client = i2c_new_device(demod_i2c, &info);
>> -
>> - if (client == NULL || client->dev.driver == NULL) {
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("mn88473", NULL, demod_i2c,
>> + dev->board.demod_addr,
>> + &mn88473_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> dvb->i2c_client_demod[0] = client;
>>
>> /* define general-purpose callback pointer */
>> @@ -1095,9 +996,6 @@ static int dvb_init(struct cx231xx *dev)
>> }
>> case CX231XX_BOARD_HAUPPAUGE_935C:
>> {
>> - struct i2c_client *client;
>> - struct i2c_adapter *adapter;
>> - struct i2c_board_info info = {};
>> struct si2157_config si2157_config = {};
>> struct si2168_config si2168_config = {};
>>
>> @@ -1107,25 +1005,14 @@ static int dvb_init(struct cx231xx *dev)
>> si2168_config.i2c_adapter = &adapter;
>> si2168_config.ts_clock_inv = true;
>>
>> - strlcpy(info.type, "si2168", sizeof(info.type));
>> - info.addr = dev->board.demod_addr;
>> - info.platform_data = &si2168_config;
>> -
>> - request_module(info.type);
>> - client = i2c_new_device(demod_i2c, &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2168", NULL, demod_i2c,
>> + dev->board.demod_addr,
>> + &si2168_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - dev_err(dev->dev,
>> - "Failed to attach %s frontend.\n", info.type);
>> - i2c_unregister_device(client);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> dvb->i2c_client_demod[0] = client;
>> dev->dvb->frontend[0]->ops.i2c_gate_ctrl = NULL;
>>
>> @@ -1140,40 +1027,21 @@ static int dvb_init(struct cx231xx *dev)
>> si2157_config.if_port = 1;
>> si2157_config.inversion = true;
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> - strlcpy(info.type, "si2157", I2C_NAME_SIZE);
>> - info.addr = dev->board.tuner_addr;
>> - info.platform_data = &si2157_config;
>> - request_module("si2157");
>> -
>> - client = i2c_new_device(tuner_i2c, &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - dev_err(dev->dev,
>> - "Failed to obtain %s tuner.\n", info.type);
>> - i2c_unregister_device(client);
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2157", NULL, tuner_i2c,
>> + dev->board.tuner_addr,
>> + &si2157_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> dev->cx231xx_reset_analog_tuner = NULL;
>> dev->dvb->i2c_client_tuner = client;
>> break;
>> }
>> case CX231XX_BOARD_HAUPPAUGE_975:
>> {
>> - struct i2c_client *client;
>> - struct i2c_adapter *adapter;
>> struct i2c_adapter *adapter2;
>> - struct i2c_board_info info = {};
>> struct si2157_config si2157_config = {};
>> struct lgdt3306a_config lgdt3306a_config = {};
>> struct si2168_config si2168_config = {};
>> @@ -1184,25 +1052,14 @@ static int dvb_init(struct cx231xx *dev)
>> lgdt3306a_config.i2c_adapter = &adapter;
>> lgdt3306a_config.deny_i2c_rptr = 0;
>>
>> - strlcpy(info.type, "lgdt3306a", sizeof(info.type));
>> - info.addr = dev->board.demod_addr;
>> - info.platform_data = &lgdt3306a_config;
>> -
>> - request_module(info.type);
>> - client = i2c_new_device(demod_i2c, &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("lgdt3306a", NULL, demod_i2c,
>> + dev->board.demod_addr,
>> + &lgdt3306a_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - dev_err(dev->dev,
>> - "Failed to attach %s frontend.\n", info.type);
>> - i2c_unregister_device(client);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> dvb->i2c_client_demod[0] = client;
>>
>> /* attach second demodulator chip */
>> @@ -1211,30 +1068,14 @@ static int dvb_init(struct cx231xx *dev)
>> si2168_config.i2c_adapter = &adapter2;
>> si2168_config.ts_clock_inv = true;
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> - strlcpy(info.type, "si2168", sizeof(info.type));
>> - info.addr = dev->board.demod_addr2;
>> - info.platform_data = &si2168_config;
>> -
>> - request_module(info.type);
>> - client = i2c_new_device(adapter, &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> - dev_err(dev->dev,
>> - "Failed to attach %s frontend.\n", info.type);
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2168", NULL, adapter,
>> + dev->board.demod_addr2,
>> + &si2168_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - i2c_unregister_device(client);
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> dvb->i2c_client_demod[1] = client;
>> dvb->frontend[1]->id = 1;
>>
>> @@ -1250,34 +1091,14 @@ static int dvb_init(struct cx231xx *dev)
>> si2157_config.if_port = 1;
>> si2157_config.inversion = true;
>>
>> - memset(&info, 0, sizeof(struct i2c_board_info));
>> - strlcpy(info.type, "si2157", I2C_NAME_SIZE);
>> - info.addr = dev->board.tuner_addr;
>> - info.platform_data = &si2157_config;
>> - request_module("si2157");
>> -
>> - client = i2c_new_device(adapter, &info);
>> - if (client == NULL || client->dev.driver == NULL) {
>> - module_put(dvb->i2c_client_demod[1]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[1]);
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> + /* perform tuner probe/init/attach */
>> + client = dvb_module_probe("si2157", NULL, adapter,
>> + dev->board.tuner_addr,
>> + &si2157_config);
>> + if (!client) {
>> result = -ENODEV;
>> goto out_free;
>> }
>> -
>> - if (!try_module_get(client->dev.driver->owner)) {
>> - dev_err(dev->dev,
>> - "Failed to obtain %s tuner.\n", info.type);
>> - i2c_unregister_device(client);
>> - module_put(dvb->i2c_client_demod[1]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[1]);
>> - module_put(dvb->i2c_client_demod[0]->dev.driver->owner);
>> - i2c_unregister_device(dvb->i2c_client_demod[0]);
>> - result = -ENODEV;
>> - goto out_free;
>> - }
>> -
>> dev->cx231xx_reset_analog_tuner = NULL;
>> dvb->i2c_client_tuner = client;
>>
>> @@ -1316,6 +1137,18 @@ static int dvb_init(struct cx231xx *dev)
>> return result;
>>
>> out_free:
>> + /* remove I2C tuner */
>> + client = dvb->i2c_client_tuner;
>> + if (client)
>> + dvb_module_release(client);
>> + /* remove I2C demod(s) */
>> + client = dvb->i2c_client_demod[1];
>> + if (client)
>> + dvb_module_release(client);
>> + client = dvb->i2c_client_demod[0];
>> + if (client)
>> + dvb_module_release(client);
>> +
> Same as above, no need to check pointer.
> Maybe set pointers to NULL afterwards.
>
>> kfree(dvb);
>> dev->dvb = NULL;
>> goto ret;
>>
