Hi Akinobu,

On Mon, Apr 16, 2018 at 11:51:46AM +0900, Akinobu Mita wrote:
> The ov772x driver uses "rstb-gpios" and "pwdn-gpios" for reset and
> powerdown pins.  However, using generic names for thse gpios is preferred.

nit: 'these gpios'

> ("reset-gpios" and "powerdown-gpios" respectively)
>
> There is only one mainline user for these gpios, so rename to generic
> names.
>
> Cc: Jacopo Mondi <jacopo+rene...@jmondi.org>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Cc: Hans Verkuil <hans.verk...@cisco.com>
> Cc: Sakari Ailus <sakari.ai...@linux.intel.com>
> Cc: Mauro Carvalho Chehab <mche...@s-opensource.com>
> Signed-off-by: Akinobu Mita <akinobu.m...@gmail.com>

Bindings update should come first.
Not a big deal.

Reviewed-by: Jacopo Mondi <jac...@jmondi.org>

> ---
> * v2
> - New patch
>
>  arch/sh/boards/mach-migor/setup.c | 5 +++--
>  drivers/media/i2c/ov772x.c        | 8 ++++----
>  2 files changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/arch/sh/boards/mach-migor/setup.c 
> b/arch/sh/boards/mach-migor/setup.c
> index 271dfc2..73b9ee4 100644
> --- a/arch/sh/boards/mach-migor/setup.c
> +++ b/arch/sh/boards/mach-migor/setup.c
> @@ -351,8 +351,9 @@ static struct platform_device migor_ceu_device = {
>  static struct gpiod_lookup_table ov7725_gpios = {
>       .dev_id         = "0-0021",
>       .table          = {
> -             GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "pwdn", GPIO_ACTIVE_HIGH),
> -             GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
> +             GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
> +                         GPIO_ACTIVE_HIGH),
> +             GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
>       },
>  };
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 0ae2a4f..88d1418a 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -837,10 +837,10 @@ static int ov772x_power_on(struct ov772x_priv *priv)
>        * available to handle this cleanly, request the GPIO temporarily
>        * to avoid conflicts.
>        */
> -     priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
> +     priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset",
>                                            GPIOD_OUT_LOW);
>       if (IS_ERR(priv->rstb_gpio)) {
> -             dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
> +             dev_info(&client->dev, "Unable to get GPIO \"reset\"");
>               return PTR_ERR(priv->rstb_gpio);
>       }
>
> @@ -1309,10 +1309,10 @@ static int ov772x_probe(struct i2c_client *client,
>               goto error_ctrl_free;
>       }
>
> -     priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
> +     priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown",
>                                            GPIOD_OUT_LOW);
>       if (IS_ERR(priv->pwdn_gpio)) {
> -             dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
> +             dev_info(&client->dev, "Unable to get GPIO \"powerdown\"");
>               ret = PTR_ERR(priv->pwdn_gpio);
>               goto error_clk_put;
>       }
> --
> 2.7.4
>

Attachment: signature.asc
Description: PGP signature

Reply via email to