Hi Niklas,

Thank you for the patch.

On Tuesday, 13 February 2018 01:01:31 EEST Niklas Söderlund wrote:
> Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
> are located between the video sources (CSI-2 transmitters) and the video
> grabbers (VIN) on Gen3 of Renesas R-Car SoC.
> 
> Each CSI-2 device is connected to more than one VIN device which
> simultaneously can receive video from the same CSI-2 device. Each VIN
> device can also be connected to more than one CSI-2 device. The routing
> of which links are used is controlled by the VIN devices. There are only
> a few possible routes which are set by hardware limitations, which are
> different for each SoC in the Gen3 family.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> Acked-by: Rob Herring <r...@kernel.org>
> Acked-by: Sakari Ailus <sakari.ai...@linux.intel.com>

Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>

> ---
>  .../bindings/media/renesas,rcar-csi2.txt           | 99 +++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 100 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
> b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt new file
> mode 100644
> index 0000000000000000..6f71f997dc48eee9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
> @@ -0,0 +1,99 @@
> +Renesas R-Car MIPI CSI-2
> +------------------------
> +
> +The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
> +Renesas R-Car family of devices. It is used in conjunction with the
> +R-Car VIN module, which provides the video capture capabilities.
> +
> +Mandatory properties
> +--------------------
> + - compatible: Must be one or more of the following
> +   - "renesas,r8a7795-csi2" for the R8A7795 device.
> +   - "renesas,r8a7796-csi2" for the R8A7796 device.
> +
> + - reg: the register base and size for the device registers
> + - interrupts: the interrupt for the device
> + - clocks: reference to the parent clock
> +
> +The device node shall contain two 'port' child nodes according to the
> +bindings defined in Documentation/devicetree/bindings/media/
> +video-interfaces.txt. Port 0 shall connect to the CSI-2 source. Port 1
> +shall connect to all the R-Car VIN modules that have a hardware
> +connection to the CSI-2 receiver.
> +
> +- Port 0 - Video source (mandatory)
> +     - Endpoint 0 - sub-node describing the endpoint that is the video source
> +
> +- Port 1 - VIN instances (optional)
> +     - One endpoint sub-node for every R-Car VIN instance which is connected
> +       to the R-Car CSI-2 receiver.
> +
> +Example:
> +
> +     csi20: csi2@fea80000 {
> +             compatible = "renesas,r8a7796-csi2";
> +             reg = <0 0xfea80000 0 0x10000>;
> +             interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
> +             clocks = <&cpg CPG_MOD 714>;
> +             power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +             resets = <&cpg 714>;
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port@0 {
> +                             #address-cells = <1>;
> +                             #size-cells = <0>;
> +
> +                             reg = <0>;
> +
> +                             csi20_in: endpoint@0 {
> +                                     reg = <0>;
> +                                     clock-lanes = <0>;
> +                                     data-lanes = <1>;
> +                                     remote-endpoint = <&adv7482_txb>;
> +                             };
> +                     };
> +
> +                     port@1 {
> +                             #address-cells = <1>;
> +                             #size-cells = <0>;
> +
> +                             reg = <1>;
> +
> +                             csi20vin0: endpoint@0 {
> +                                     reg = <0>;
> +                                     remote-endpoint = <&vin0csi20>;
> +                             };
> +                             csi20vin1: endpoint@1 {
> +                                     reg = <1>;
> +                                     remote-endpoint = <&vin1csi20>;
> +                             };
> +                             csi20vin2: endpoint@2 {
> +                                     reg = <2>;
> +                                     remote-endpoint = <&vin2csi20>;
> +                             };
> +                             csi20vin3: endpoint@3 {
> +                                     reg = <3>;
> +                                     remote-endpoint = <&vin3csi20>;
> +                             };
> +                             csi20vin4: endpoint@4 {
> +                                     reg = <4>;
> +                                     remote-endpoint = <&vin4csi20>;
> +                             };
> +                             csi20vin5: endpoint@5 {
> +                                     reg = <5>;
> +                                     remote-endpoint = <&vin5csi20>;
> +                             };
> +                             csi20vin6: endpoint@6 {
> +                                     reg = <6>;
> +                                     remote-endpoint = <&vin6csi20>;
> +                             };
> +                             csi20vin7: endpoint@7 {
> +                                     reg = <7>;
> +                                     remote-endpoint = <&vin7csi20>;
> +                             };
> +                     };
> +             };
> +     };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aee793bff977d413..a0ca030b6bf6b82c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8651,6 +8651,7 @@ L:      linux-media@vger.kernel.org
>  L:   linux-renesas-...@vger.kernel.org
>  T:   git git://linuxtv.org/media_tree.git
>  S:   Supported
> +F:   Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
>  F:   Documentation/devicetree/bindings/media/rcar_vin.txt
>  F:   drivers/media/platform/rcar-vin/


-- 
Regards,

Laurent Pinchart



Reply via email to