Hi Niklas,
On Tue, Feb 13, 2018 at 12:01:32AM +0100, Niklas Söderlund wrote:
> + switch (priv->lanes) {
> + case 1:
> + phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_0;
> + break;
> + case 2:
> + phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
> + break;
> + case 4:
> + phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_3 | PHYCNT_ENABLE_2 |
> + PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
> + break;
> + default:
> + return -EINVAL;
> + }
I guess you could have a simpler construct here using this:
phycnt = PHYCNT_ENABLECLK;
switch (priv->lanes) {
case 4:
phycnt |= PHYCNT_ENABLE_3 | PHYCNT_ENABLE_2;
case 2:
phycnt |= PHYCNT_ENABLE_1;
case 1:
phycnt |= PHYCNT_ENABLE_0;
break;
default:
return -EINVAL;
}
But that's really up to you.
> +static int rcar_csi2_probe(struct platform_device *pdev)
> +{
> + const struct soc_device_attribute *attr;
> + struct rcar_csi2 *priv;
> + unsigned int i;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->info = of_device_get_match_data(&pdev->dev);
> +
> + /* r8a7795 ES1.x behaves different then ES2.0+ but no own compat */
> + attr = soc_device_match(r8a7795es1);
> + if (attr)
> + priv->info = attr->data;
> +
> + priv->dev = &pdev->dev;
> +
> + mutex_init(&priv->lock);
> + priv->stream_count = 0;
> +
> + ret = rcar_csi2_probe_resources(priv, pdev);
> + if (ret) {
> + dev_err(priv->dev, "Failed to get resources\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = rcar_csi2_parse_dt(priv);
> + if (ret)
> + return ret;
> +
> + priv->subdev.owner = THIS_MODULE;
> + priv->subdev.dev = &pdev->dev;
> + v4l2_subdev_init(&priv->subdev, &rcar_csi2_subdev_ops);
> + v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
> + snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
> + KBUILD_MODNAME, dev_name(&pdev->dev));
> + priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> + priv->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> + priv->subdev.entity.ops = &rcar_csi2_entity_ops;
> +
> + priv->pads[RCAR_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
> + for (i = RCAR_CSI2_SOURCE_VC0; i < NR_OF_RCAR_CSI2_PAD; i++)
> + priv->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> +
> + ret = media_entity_pads_init(&priv->subdev.entity, NR_OF_RCAR_CSI2_PAD,
> + priv->pads);
> + if (ret)
> + goto error;
> +
> + pm_runtime_enable(&pdev->dev);
Is CONFIG_PM mandatory on Renesas SoCs? If not, you end up with the
device uninitialised at probe, and pm_runtime_get_sync will not
initialise it either if CONFIG_PM is not enabled. I guess you could
call your runtime_resume function unconditionally, and mark the device
as active in runtime_pm using pm_runtime_set_active.
Looks good otherwise, once fixed (and if relevant):
Reviewed-by: Maxime Ripard <maxime.rip...@bootlin.com>
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
signature.asc
Description: PGP signature
