Hi Jacopo,
Thanks for review, v2 sent !
BR,
Hugues.
On 02/01/2018 05:56 PM, jacopo mondi wrote:
> Hi Hugues,
>
> On Thu, Feb 01, 2018 at 02:17:34PM +0100, Hugues Fruchet wrote:
>> Fix module_param(virtual_channel) permissions.
>> This problem was detected by checkpatch:
>> $ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c
>> ERROR: Use 4 digit octal (0777) not decimal permissions
>> #131: FILE: drivers/media/i2c/ov5640.c:131:
>> +module_param(virtual_channel, int, 0);
>>
>> Also explicitly set initial value to 0 for default value
>> and add an error trace in case of virtual_channel not in
>> the valid range of values.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruc...@st.com>
>> ---
>> drivers/media/i2c/ov5640.c | 10 +++++++---
>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
>> index 696a28b..906f202 100644
>> --- a/drivers/media/i2c/ov5640.c
>> +++ b/drivers/media/i2c/ov5640.c
>> @@ -127,8 +127,8 @@ struct ov5640_pixfmt {
>> * FIXME: remove this when a subdev API becomes available
>> * to set the MIPI CSI-2 virtual channel.
>> */
>> -static unsigned int virtual_channel;
>> -module_param(virtual_channel, int, 0);
>> +static unsigned int virtual_channel = 0;
>> +module_param(virtual_channel, int, 0444);
>
> Parameter type is unsigned int, please use uint here.
> As also checkpatch reports, it is not necessary to initialize static
> variables to 0.
>
>> MODULE_PARM_DESC(virtual_channel,
>> "MIPI CSI-2 virtual channel (0..3), default 0");
>>
>> @@ -1358,11 +1358,15 @@ static int ov5640_binning_on(struct ov5640_dev
>> *sensor)
>>
>> static int ov5640_set_virtual_channel(struct ov5640_dev *sensor)
>> {
>> + struct i2c_client *client = sensor->i2c_client;
>> u8 temp, channel = virtual_channel;
>> int ret;
>>
>> - if (channel > 3)
>> + if (channel > 3) {
>> + dev_err(&client->dev, "%s: wrong virtual_channel parameter
>> value, expected (0..3), got %d\n",
>
> I understand you don't want to break error messages to 80 columns to
> ease grep for errors, but you can break the line after "client->dev"
> to make this less painful for the eyes.
>
> Thanks
> j
>
>> + __func__, channel);
>> return -EINVAL;
>> + }
>>
>> ret = ov5640_read_reg(sensor, OV5640_REG_DEBUG_MODE, &temp);
>> if (ret)
>> --
>> 1.9.1
>>
