Hi Folks,
I have found a problem with the hauppauge wintv hvr 2200
on linux 2.6.32-rc7 x86-64.
When I initialize the second tuner with tzap the first
lose the FE_HAS_LOCK, and viceversa. Here is an example:
tzap -a 1 "LA7(MBone)"
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 826000000 Hz
video pid 0x0101, audio pid 0x0102
status 00 | signal d5d5 | snr 0044 | ber 0000ffff | unc 00000000 |
status 1f | signal fdfd | snr 00d7 | ber 00000617 | unc 00000045 | FE_HAS_LOCK
status 1f | signal fcfc | snr 00c6 | ber 0000094e | unc 00000000 | FE_HAS_LOCK
status 1f | signal fafa | snr 00a8 | ber 000009db | unc 00000046 | FE_HAS_LOCK
status 01 | signal 0000 | snr 0005 | ber 0000ffff | unc 00000000 |
status 1f | signal fdfd | snr 00c6 | ber 000007d8 | unc 00000000 | FE_HAS_LOCK
status 1f | signal fcfc | snr 00c6 | ber 00000750 | unc 00000000 | FE_HAS_LOCK
status 1f | signal fcfc | snr 00d7 | ber 0000082c | unc 00000000 | FE_HAS_LOCK
status 1f | signal fcfc | snr 00b9 | ber 00000898 | unc 00000000 | FE_HAS_LOCK
'status 01' happened when running 'tzap MTV'.
I have discovered this behaviour while watching tv with
both vlc and kaffeine: when one of the two application are
opened or closed, the image is garbled for about 1 seconds.
Any feedback are welcome.
TIA
This is my full dmesg:
Linux version 2.6.32-rc7 (r...@challenger) (gcc version 4.3.3 (GCC) ) #1 SMP
Sat Nov 14 17:48:19 CET
2009
Command line: BOOT_IMAGE=Linux ro root=802
vt.default_utf8=0
KERNEL supported
cpus:
Intel
GenuineIntel
AMD
AuthenticAMD
Centaur
CentaurHauls
BIOS-provided physical RAM
map:
BIOS-e820: 0000000000000000 - 000000000009e400
(usable)
BIOS-e820: 000000000009e400 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 00000000bfe90000
(usable)
BIOS-e820: 00000000bfe90000 - 00000000bfee3000 (ACPI
NVS)
BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI
data)
BIOS-e820: 00000000bfef0000 - 00000000bff00000
(reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000
(reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
BIOS-e820: 0000000100000000 - 0000000140000000
(usable)
DMI 2.5
present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x140000 max_arch_pfn =
0x400000000
last_pfn = 0xbfe90 max_arch_pfn =
0x400000000
initial memory mapped : 0 -
20000000
init_memory_mapping:
0000000000000000-00000000bfe90000
0000000000 - 00bfe00000 page
2M
00bfe00000 - 00bfe90000 page
4k
kernel direct mapping tables up to bfe90000 @
10000-15000
init_memory_mapping:
0000000100000000-0000000140000000
0100000000 - 0140000000 page
2M
kernel direct mapping tables up to 140000000 @
13000-19000
ACPI: RSDP 00000000000f8b10 00014 (v00
IntelR)
ACPI: RSDT 00000000bfee3000 00038 (v01 IntelR AWRDACPI 42302E31 AWRD
00000000)
ACPI: FACP 00000000bfee3080 00084 (v02 IntelR AWRDACPI 42302E31 AWRD
00000000)
ACPI: DSDT 00000000bfee3140 041F1 (v01 INTELR AWRDACPI 00001000 MSFT
03000000)
ACPI: FACS 00000000bfe90000
00040
ACPI: HPET 00000000bfee7400 00038 (v01 IntelR AWRDACPI 42302E31 AWRD
00000098)
ACPI: MCFG 00000000bfee7440 0003C (v01 IntelR AWRDACPI 42302E31 AWRD
00000000)
ACPI: APIC 00000000bfee7340 00084 (v01 IntelR AWRDACPI 42302E31 AWRD
00000000)
ACPI: SSDT 00000000bfee7ae0 00590 (v01 PmRef CpuPm 00003000 INTL
20050309)
ACPI: Local APIC address
0xfee00000
(7 early reservations) ==> bootmem [0000000000 -
0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
#2 [0001000000 - 00013a6498] TEXT DATA BSS ==> [0001000000 -
00013a6498]
#3 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 -
0000100000]
#4 [00013a7000 - 00013a7110] BRK ==> [00013a7000 -
00013a7110]
#5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 -
0000013000]
#6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 -
0000014000]
Zone PFN
ranges:
DMA 0x00000010 ->
0x00001000
DMA32 0x00001000 ->
0x00100000
Normal 0x00100000 ->
0x00140000
Movable zone start PFN for each
node
early_node_map[3] active PFN
ranges
0: 0x00000010 ->
0x0000009e
0: 0x00000100 ->
0x000bfe90
0: 0x00100000 ->
0x00140000
On node 0 totalpages:
1048094
DMA zone: 56 pages used for
memmap
DMA zone: 105 pages
reserved
DMA zone: 3821 pages, LIFO
batch:0
DMA32 zone: 14280 pages used for
memmap
DMA32 zone: 767688 pages, LIFO
batch:31
Normal zone: 3584 pages used for
memmap
Normal zone: 258560 pages, LIFO
batch:31
ACPI: PM-Timer IO Port:
0x408
ACPI: Local APIC address
0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01]
enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02]
disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03]
disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge
lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge
lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge
lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge
lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000]
gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
ACPI: IRQ0 used by
override.
ACPI: IRQ2 used by
override.
ACPI: IRQ9 used by
override.
Using ACPI (MADT) for SMP configuration
information
ACPI: HPET id: 0x8086a201 base:
0xfed00000
4 Processors exceeds NR_CPUS limit of
2
SMP: Allowing 2 CPUs, 0 hotplug
CPUs
nr_irqs_gsi:
24
Allocating PCI resources starting at bff00000 (gap:
bff00000:20100000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff880028200000 s70488 r8192 d23720
u1048576
pcpu-alloc: s70488 r8192 d23720 u1048576
alloc=1*2097152
pcpu-alloc: [0] 0
1
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
1030069
Kernel command line: BOOT_IMAGE=Linux ro root=802
vt.default_utf8=0
PID hash table entries: 4096 (order: 3, 32768
bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
Initializing
CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size
0x240
Checking
aperture...
No AGP bridge
found
PCI-DMA: Using software bounce buffering for IO
(SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
software IO TLB at phys 0x20000000 -
0x24000000
Memory: 4057888k/5242880k available (2083k kernel code, 1050504k absent,
133588k reserved, 895k data, 340k
init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
Hierarchical RCU
implementation.
NR_IRQS:320
Console: colour VGA+
80x25
console [tty0]
enabled
hpet clockevent
registered
HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
Fast TSC calibration using
PIT
Detected 3327.688 MHz
processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
6655.37 BogoMIPS
(lpj=3327688)
Mount-cache hash table entries:
256
CPU: L1 I cache: 32K, L1 D cache:
32K
CPU: L2 cache:
6144K
CPU: Physical Processor ID:
0
CPU: Processor Core ID:
0
using mwait in idle
threads.
Freeing SMP alternatives: 19k
freed
ACPI: Core revision
20090903
Setting APIC routing to
flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1
pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping
0a
Booting processor 1 APIC 0x1 ip
0x6000
Initializing
CPU#1
Calibrating delay using timer specific routine.. 6655.39 BogoMIPS
(lpj=3327697)
CPU: L1 I cache: 32K, L1 D cache:
32K
CPU: L2 cache:
6144K
CPU: Physical Processor ID:
0
CPU: Processor Core ID:
1
CPU1: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping
0a
checking TSC synchronization [CPU#0 -> CPU#1]:
passed.
Brought up 2
CPUs
Total of 2 processors activated (13310.77
BogoMIPS).
NET: Registered protocol family
16
ACPI: bus type pci
registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
PCI: MCFG area at e0000000 reserved in
E820
PCI: Using MMCONFIG at e0000000 -
efffffff
PCI: Using configuration type 1 for base
access
bio: create slab <bio-0> at
0
ACPI: EC: Look up EC in
DSDT
ACPI: Interpreter
enabled
ACPI: (supports S0
S5)
ACPI: Using IOAPIC for interrupt
routing
ACPI: PCI Root Bridge [PCI0]
(0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot
D3cold
pci 0000:00:01.0: PME#
disabled
pci 0000:00:1a.0: reg 20 io port:
[0xff00-0xff1f]
pci 0000:00:1a.1: reg 20 io port:
[0xfe00-0xfe1f]
pci 0000:00:1a.2: reg 20 io port:
[0xfd00-0xfd1f]
pci 0000:00:1a.7: reg 10 32bit mmio:
[0xfdfff000-0xfdfff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot
D3cold
pci 0000:00:1a.7: PME#
disabled
pci 0000:00:1b.0: reg 10 64bit mmio:
[0xfdff4000-0xfdff7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot
D3cold
pci 0000:00:1b.0: PME#
disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.0: PME#
disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.2: PME#
disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.4: PME#
disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.5: PME#
disabled
pci 0000:00:1d.0: reg 20 io port:
[0xfc00-0xfc1f]
pci 0000:00:1d.1: reg 20 io port:
[0xfb00-0xfb1f]
pci 0000:00:1d.2: reg 20 io port:
[0xfa00-0xfa1f]
pci 0000:00:1d.7: reg 10 32bit mmio:
[0xfdffe000-0xfdffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot
D3cold
pci 0000:00:1d.7: PME#
disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6
GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask
003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask
003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask
000f)
pci 0000:00:1f.2: reg 10 io port:
[0xf900-0xf907]
pci 0000:00:1f.2: reg 14 io port:
[0xf800-0xf803]
pci 0000:00:1f.2: reg 18 io port:
[0xf700-0xf707]
pci 0000:00:1f.2: reg 1c io port:
[0xf600-0xf603]
pci 0000:00:1f.2: reg 20 io port:
[0xf500-0xf51f]
pci 0000:00:1f.2: reg 24 32bit mmio:
[0xfdffd000-0xfdffd7ff]
pci 0000:00:1f.2: PME# supported from
D3hot
pci 0000:00:1f.2: PME#
disabled
pci 0000:00:1f.3: reg 10 64bit mmio:
[0xfdffc000-0xfdffc0ff]
pci 0000:00:1f.3: reg 20 io port:
[0x500-0x51f]
pci 0000:01:00.0: reg 10 32bit mmio:
[0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref:
[0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio:
[0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port:
[0xbf00-0xbf7f]
pci 0000:01:00.0: reg 30 32bit mmio pref:
[0x000000-0x07ffff]
pci 0000:00:01.0: bridge io port:
[0xb000-0xbfff]
pci 0000:00:01.0: bridge 32bit mmio:
[0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port:
[0xa000-0xafff]
pci 0000:00:1c.0: bridge 32bit mmio:
[0xfdb00000-0xfdbfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref:
[0xfd800000-0xfd8fffff]
pci 0000:03:00.0: reg 10 64bit mmio:
[0xfd000000-0xfd3fffff]
pci 0000:03:00.0: reg 18 64bit mmio:
[0xfcc00000-0xfcffffff]
pci 0000:03:00.0: supports D1
D2
pci 0000:03:00.0: PME# supported from D0 D1
D2
pci 0000:03:00.0: PME#
disabled
pci 0000:00:1c.2: bridge io port:
[0x9000-0x9fff]
pci 0000:00:1c.2: bridge 32bit mmio:
[0xfcc00000-0xfd3fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref:
[0xfd700000-0xfd7fffff]
pci 0000:00:1c.4: bridge io port:
[0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio:
[0xfd600000-0xfd6fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref:
[0xfde00000-0xfdefffff]
pci 0000:05:00.0: reg 10 io port:
[0xce00-0xceff]
pci 0000:05:00.0: reg 18 64bit mmio:
[0xfddff000-0xfddfffff]
pci 0000:05:00.0: reg 20 64bit mmio pref:
[0xfdcf0000-0xfdcfffff]
pci 0000:05:00.0: reg 30 32bit mmio pref:
[0x000000-0x01ffff]
pci 0000:05:00.0: supports D1
D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:05:00.0: PME#
disabled
pci 0000:00:1c.5: bridge io port:
[0xc000-0xcfff]
pci 0000:00:1c.5: bridge 32bit mmio:
[0xfdd00000-0xfddfffff]
pci 0000:00:1c.5: bridge 64bit mmio pref:
[0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: transparent
bridge
pci 0000:00:1e.0: bridge io port:
[0x8000-0x8fff]
pci 0000:00:1e.0: bridge 32bit mmio:
[0xfda00000-0xfdafffff]
pci 0000:00:1e.0: bridge 64bit mmio pref:
[0xfd900000-0xfd9fffff]
pci_bus 0000:00: on NUMA node
0
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14
15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14
15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14
15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14
15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14
15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14
15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14
15)
vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb:
loaded
SCSI subsystem
initialized
libata version 3.00
loaded.
PCI: Using ACPI for IRQ
routing
Switching to clocksource
tsc
pnp: PnP ACPI
init
ACPI: bus type pnp
registered
pnp: PnP ACPI: found 15
devices
ACPI: ACPI bus type pnp
unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been
reserved
system 00:01: ioport range 0x800-0x87f has been
reserved
system 00:01: ioport range 0x290-0x297 has been
reserved
system 00:01: ioport range 0x880-0x88f has been
reserved
system 00:0b: ioport range 0x400-0x4bf could not be
reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been
reserved
system 00:0e: iomem range 0xf0000-0xfffff could not be
reserved
system 00:0e: iomem range 0xbff00000-0xbfffffff could not be
reserved
system 00:0e: iomem range 0xfed00000-0xfed000ff has been
reserved
system 00:0e: iomem range 0xbfe90000-0xbfefffff could not be
reserved
system 00:0e: iomem range 0x0-0x9ffff could not be
reserved
system 00:0e: iomem range 0x100000-0xbfe8ffff could not be
reserved
system 00:0e: iomem range 0xfec00000-0xfec00fff could not be
reserved
system 00:0e: iomem range 0xfed13000-0xfed1ffff has been
reserved
system 00:0e: iomem range 0xfed20000-0xfed9ffff has been
reserved
system 00:0e: iomem range 0xfee00000-0xfee00fff has been
reserved
system 00:0e: iomem range 0xffb00000-0xffb7ffff has been
reserved
system 00:0e: iomem range 0xfff00000-0xffffffff has been
reserved
system 00:0e: iomem range 0xe0000-0xeffff has been
reserved
pci 0000:00:01.0: PCI bridge, secondary bus
0000:01
pci 0000:00:01.0: IO window:
0xb000-0xbfff
pci 0000:00:01.0: MEM window:
0xf8000000-0xfbffffff
pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus
0000:02
pci 0000:00:1c.0: IO window:
0xa000-0xafff
pci 0000:00:1c.0: MEM window:
0xfdb00000-0xfdbfffff
pci 0000:00:1c.0: PREFETCH window:
0x000000fd800000-0x000000fd8fffff
pci 0000:00:1c.2: PCI bridge, secondary bus
0000:03
pci 0000:00:1c.2: IO window:
0x9000-0x9fff
pci 0000:00:1c.2: MEM window:
0xfcc00000-0xfd3fffff
pci 0000:00:1c.2: PREFETCH window:
0x000000fd700000-0x000000fd7fffff
pci 0000:00:1c.4: PCI bridge, secondary bus
0000:04
pci 0000:00:1c.4: IO window:
0xd000-0xdfff
pci 0000:00:1c.4: MEM window:
0xfd600000-0xfd6fffff
pci 0000:00:1c.4: PREFETCH window:
0x000000fde00000-0x000000fdefffff
pci 0000:00:1c.5: PCI bridge, secondary bus
0000:05
pci 0000:00:1c.5: IO window:
0xc000-0xcfff
pci 0000:00:1c.5: MEM window:
0xfdd00000-0xfddfffff
pci 0000:00:1c.5: PREFETCH window:
0x000000fdc00000-0x000000fdcfffff
pci 0000:00:1e.0: PCI bridge, secondary bus
0000:06
pci 0000:00:1e.0: IO window:
0x8000-0x8fff
pci 0000:00:1e.0: MEM window:
0xfda00000-0xfdafffff
pci 0000:00:1e.0: PREFETCH window:
0x000000fd900000-0x000000fd9fffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
pci 0000:00:01.0: setting latency timer to
64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
pci 0000:00:1c.0: setting latency timer to
64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
pci 0000:00:1c.2: setting latency timer to
64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ
16
pci 0000:00:1c.4: setting latency timer to
64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ
17
pci 0000:00:1c.5: setting latency timer to
64
pci 0000:00:1e.0: setting latency timer to
64
pci_bus 0000:00: resource 0 io:
[0x00-0xffff]
pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:
[0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem:
[0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 pref mem
[0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:
[0xa000-0xafff]
pci_bus 0000:02: resource 1 mem:
[0xfdb00000-0xfdbfffff]
pci_bus 0000:02: resource 2 pref mem
[0xfd800000-0xfd8fffff]
pci_bus 0000:03: resource 0 io:
[0x9000-0x9fff]
pci_bus 0000:03: resource 1 mem:
[0xfcc00000-0xfd3fffff]
pci_bus 0000:03: resource 2 pref mem
[0xfd700000-0xfd7fffff]
pci_bus 0000:04: resource 0 io:
[0xd000-0xdfff]
pci_bus 0000:04: resource 1 mem:
[0xfd600000-0xfd6fffff]
pci_bus 0000:04: resource 2 pref mem
[0xfde00000-0xfdefffff]
pci_bus 0000:05: resource 0 io:
[0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem:
[0xfdd00000-0xfddfffff]
pci_bus 0000:05: resource 2 pref mem
[0xfdc00000-0xfdcfffff]
pci_bus 0000:06: resource 0 io:
[0x8000-0x8fff]
pci_bus 0000:06: resource 1 mem:
[0xfda00000-0xfdafffff]
pci_bus 0000:06: resource 2 pref mem
[0xfd900000-0xfd9fffff]
pci_bus 0000:06: resource 3 io:
[0x00-0xffff]
pci_bus 0000:06: resource 4 mem:
[0x000000-0xffffffffffffffff]
NET: Registered protocol family
2
IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
TCP: Hash tables configured (established 262144 bind
65536)
TCP reno
registered
NET: Registered protocol family
1
pci 0000:01:00.0: Boot video
device
SGI XFS with security attributes, large block/inode numbers, no debug
enabled
msgmni has been set to
7927
Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
io scheduler noop
registered
io scheduler cfq registered
(default)
pcieport 0000:00:01.0: irq 24 for
MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to
64
pcieport 0000:00:1c.0: irq 25 for
MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to
64
pcieport 0000:00:1c.2: irq 26 for
MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to
64
pcieport 0000:00:1c.4: irq 27 for
MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to
64
pcieport 0000:00:1c.5: irq 28 for
MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to
64
ahci 0000:00:1f.2: version
3.0
ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ
19
ahci 0000:00:1f.2: irq 29 for
MSI/MSI-X
ahci: SSS flag set, parallel bus scan
disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA
mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc
ems
ahci 0000:00:1f.2: setting latency timer to
64
scsi0 :
ahci
scsi1 :
ahci
scsi2 :
ahci
scsi3 :
ahci
scsi4 :
ahci
scsi5 :
ahci
ata1: SATA max UDMA/133 abar m2...@0xfdffd000 port 0xfdffd100 irq
29
ata2: SATA max UDMA/133 abar m2...@0xfdffd000 port 0xfdffd180 irq
29
ata3: SATA max UDMA/133 abar m2...@0xfdffd000 port 0xfdffd200 irq
29
ata4: SATA max UDMA/133 abar m2...@0xfdffd000 port 0xfdffd280 irq
29
ata5: SATA max UDMA/133 abar m2...@0xfdffd000 port 0xfdffd300 irq
29
ata6: SATA max UDMA/133 abar m2...@0xfdffd000 port 0xfdffd380 irq
29
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq
1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot
with
i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq
1
mice: PS/2 mouse device common for all
mice
cpuidle: using governor
ladder
cpuidle: using governor
menu
TCP cubic
registered
NET: Registered protocol family
17
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl
300)
ata1.00: ATA-8: ST31000528AS, CC36, max
UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth
31/32)
ata1.00: configured for
UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC36 PQ: 0 ANSI:
5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931
GiB)
sd 0:0:0:0: [sda] Write Protect is
off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or
FUA
sda: sda1 sda2
sda3
sd 0:0:0:0: [sda] Attached SCSI
disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max
UDMA/100
ata2.00: configured for
UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI:
5
ata3: SATA link down (SStatus 0 SControl
300)
ata4: SATA link down (SStatus 0 SControl
300)
ata5: SATA link down (SStatus 0 SControl
300)
ata6: SATA link down (SStatus 0 SControl
300)
XFS mounting filesystem
sda2
Ending clean XFS mount for filesystem:
sda2
VFS: Mounted root (xfs filesystem) readonly on device
8:2.
Freeing unused kernel memory: 340k
freed
sd 0:0:0:0: Attached scsi generic sg0 type
0
sr 1:0:0:0: Attached scsi generic sg1 type
5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
Uniform CD-ROM driver Revision:
3.20
sr 1:0:0:0: Attached scsi CD-ROM
sr0
Floppy drive(s): fd0 is
1.44M
FDC 0 is a post-1991
82077
r8169 Gigabit Ethernet driver 2.3LK-NAPI
loaded
r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
r8169 0000:05:00.0: setting latency timer to
64
r8169 0000:05:00.0: irq 30 for
MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc9001059e000, 00:01:29:a7:66:0b, XID 1c4000c0 IRQ
30
input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button
[PWRB]
input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button
[PWRF]
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ
18
Driver 'rtc_cmos' needs updating - please use bus_type
methods
rtc_cmos 00:04: RTC can wake from
S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as
rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet
irqs
thermal LNXTHERM:01: registered as
thermal_zone0
ACPI: Thermal Zone [THRM] (28
C)
ACPI: SSDT 00000000bfee74c0 0026C (v01 PmRef Cpu0Ist 00003000 INTL
20050309)
processor LNXCPU:00: registered as
cooling_device0
ACPI: SSDT 00000000bfee7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL
20050309)
processor LNXCPU:01: registered as
cooling_device1
usbcore: registered new interface driver
usbfs
usbcore: registered new interface driver
hub
usbcore: registered new device driver
usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
ehci_hcd 0000:00:1a.7: setting latency timer to
64
ehci_hcd 0000:00:1a.7: EHCI Host
Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number
1
fan PNP0C0B:00: registered as
cooling_device2
ACPI: Fan [FAN]
(on)
ehci_hcd 0000:00:1a.7: cache line size of 32 is not
supported
ehci_hcd 0000:00:1a.7: irq 18, io mem
0xfdfff000
saa7164 driver
loaded
saa7164 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
CORE saa7164[0]: subsystem: 0070:8980, board: Hauppauge WinTV-HVR2200
[card=4,autodetected]
saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 18, latency: 0, mmio:
0xfd000000
saa7164 0000:03:00.0: setting latency timer to
64
IRQ 18/saa7164[0]: IRQF_DISABLED is not guaranteed on shared
IRQs
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI
1.00
usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb1: Product: EHCI Host
Controller
usb usb1: Manufacturer: Linux 2.6.32-rc7
ehci_hcd
usb usb1: SerialNumber:
0000:00:1a.7
usb usb1: configuration #1 chosen from 1
choice
hub 1-0:1.0: USB hub
found
hub 1-0:1.0: 6 ports
detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
ehci_hcd 0000:00:1d.7: setting latency timer to
64
ehci_hcd 0000:00:1d.7: EHCI Host
Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number
2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
ehci_hcd 0000:00:1d.7: irq 23, io mem
0xfdffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI
1.00
usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb2: Product: EHCI Host
Controller
usb usb2: Manufacturer: Linux 2.6.32-rc7
ehci_hcd
usb usb2: SerialNumber:
0000:00:1d.7
usb usb2: configuration #1 chosen from 1
choice
hub 2-0:1.0: USB hub
found
hub 2-0:1.0: 6 ports
detected
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
HDA Intel 0000:00:1b.0: setting latency timer to
64
saa7164_downloadfirmware() no first
image
saa7164_downloadfirmware() Waiting for firmware upload (v4l-saa7164-1.0.3.fw)
saa7164 0000:03:00.0: firmware: requesting v4l-saa7164-1.0.3.fw
nvidia: module license 'NVIDIA' taints
kernel.
Disabling lock debugging due to kernel
taint
uhci_hcd: USB Universal Host Controller Interface
driver
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
nvidia 0000:01:00.0: setting latency timer to
64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT
2009
hda_codec: ALC889A: BIOS
auto-probing.
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
uhci_hcd 0000:00:1a.0: setting latency timer to
64
uhci_hcd 0000:00:1a.0: UHCI Host
Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number
3
uhci_hcd 0000:00:1a.0: irq 16, io base
0x0000ff00
usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host
Controller
usb usb3: Manufacturer: Linux 2.6.32-rc7
uhci_hcd
usb usb3: SerialNumber:
0000:00:1a.0
usb usb3: configuration #1 chosen from 1
choice
hub 3-0:1.0: USB hub
found
hub 3-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
uhci_hcd 0000:00:1a.1: setting latency timer to
64
uhci_hcd 0000:00:1a.1: UHCI Host
Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number
4
uhci_hcd 0000:00:1a.1: irq 21, io base
0x0000fe00
usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb4: Product: UHCI Host
Controller
usb usb4: Manufacturer: Linux 2.6.32-rc7
uhci_hcd
usb usb4: SerialNumber:
0000:00:1a.1
usb usb4: configuration #1 chosen from 1
choice
hub 4-0:1.0: USB hub
found
hub 4-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ
19
uhci_hcd 0000:00:1a.2: setting latency timer to
64
uhci_hcd 0000:00:1a.2: UHCI Host
Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number
5
uhci_hcd 0000:00:1a.2: irq 19, io base
0x0000fd00
usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb5: Product: UHCI Host
Controller
usb usb5: Manufacturer: Linux 2.6.32-rc7
uhci_hcd
usb usb5: SerialNumber:
0000:00:1a.2
usb usb5: configuration #1 chosen from 1
choice
hub 5-0:1.0: USB hub
found
hub 5-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
uhci_hcd 0000:00:1d.0: setting latency timer to
64
uhci_hcd 0000:00:1d.0: UHCI Host
Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number
6
uhci_hcd 0000:00:1d.0: irq 23, io base
0x0000fc00
usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb6: Product: UHCI Host
Controller
usb usb6: Manufacturer: Linux 2.6.32-rc7
uhci_hcd
usb usb6: SerialNumber:
0000:00:1d.0
usb usb6: configuration #1 chosen from 1
choice
hub 6-0:1.0: USB hub
found
hub 6-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
uhci_hcd 0000:00:1d.1: setting latency timer to
64
uhci_hcd 0000:00:1d.1: UHCI Host
Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number
7
uhci_hcd 0000:00:1d.1: irq 19, io base
0x0000fb00
usb usb7: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb7: Product: UHCI Host
Controller
usb usb7: Manufacturer: Linux 2.6.32-rc7
uhci_hcd
usb usb7: SerialNumber:
0000:00:1d.1
usb usb7: configuration #1 chosen from 1
choice
hub 7-0:1.0: USB hub
found
hub 7-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
uhci_hcd 0000:00:1d.2: setting latency timer to
64
uhci_hcd 0000:00:1d.2: UHCI Host
Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number
8
uhci_hcd 0000:00:1d.2: irq 18, io base
0x0000fa00
usb usb8: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb8: Product: UHCI Host
Controller
usb usb8: Manufacturer: Linux 2.6.32-rc7
uhci_hcd
usb usb8: SerialNumber:
0000:00:1d.2
usb usb8: configuration #1 chosen from 1
choice
hub 8-0:1.0: USB hub
found
hub 8-0:1.0: 2 ports
detected
saa7164_downloadfirmware() firmware read 3978608
bytes.
saa7164_downloadfirmware() firmware
loaded.
Firmware file header part
1:
.FirmwareSize =
0x0
.BSLSize =
0x0
.Reserved =
0x3d0d4
.Version =
0x3
saa7164_downloadfirmware() SecBootLoader.FileSize =
3978608
saa7164_downloadfirmware() FirmwareSize =
0x1fd6
saa7164_downloadfirmware() BSLSize =
0x0
saa7164_downloadfirmware() Reserved =
0x0
saa7164_downloadfirmware() Version =
0x11cdb
usb 3-2: new low speed USB device using uhci_hcd and address
2
usb 3-2: New USB device found, idVendor=046d,
idProduct=c03e
usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
usb 3-2: Product: USB-PS/2 Optical
Mouse
usb 3-2: Manufacturer:
Logitech
usb 3-2: configuration #1 chosen from 1
choice
input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
generic-usb 0003:046D:C03E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2
Optical Mouse] on
usb-0000:00:1a.0-2/input0
usbcore: registered new interface driver
usbhid
usbhid: v2.6:USB HID core
driver
saa7164_downloadimage() Image downloaded,
booting...
saa7164_downloadimage() Image booted
successfully.
starting firmware
download(2)
saa7164_downloadimage() Image downloaded,
booting...
saa7164_downloadimage() Image booted
successfully.
firmware download
complete.
tveeprom 1-0000: Hauppauge model 89619, rev D2F2, serial#
6276906
tveeprom 1-0000: MAC address is
00-0D-FE-5F-C7-2A
tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type
4)
tveeprom 1-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom
0xfc)
tveeprom 1-0000: audio processor is SAA7164 (idx
43)
tveeprom 1-0000: decoder processor is SAA7164 (idx
40)
tveeprom 1-0000: has
radio
saa7164[0]: Hauppauge eeprom:
model=89619
tda18271 2-0060: creating new
instance
TDA18271HD/C2 detected @
2-0060
DVB: registering new adapter
(saa7164)
DVB: registering adapter 0 frontend 0 (NXP TDA10048HN
DVB-T)...
tda18271 3-0060: creating new
instance
TDA18271HD/C2 detected @
3-0060
tda18271: performing RF tracking filter
calibration
tda18271: RF tracking filter calibration
complete
DVB: registering new adapter
(saa7164)
DVB: registering adapter 1 frontend 0 (NXP TDA10048HN
DVB-T)...
r8169: eth0: link
down
usb 1-3: new high speed USB device using ehci_hcd and address
3
usb 1-3: New USB device found, idVendor=13fe,
idProduct=1e23
usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
usb 1-3: Product: STORE N
GO
usb 1-3: Manufacturer:
Verbatim
usb 1-3: SerialNumber:
07771F8004DB
usb 1-3: configuration #1 chosen from 1
choice
Initializing USB Mass Storage
driver...
scsi6 : SCSI emulation for USB Mass Storage
devices
usbcore: registered new interface driver
usb-storage
USB Mass Storage support
registered.
usb-storage: device found at
3
usb-storage: waiting for device to settle before
scanning
scsi 6:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0
CCS
sd 6:0:0:0: Attached scsi generic sg2 type
0
sd 6:0:0:0: [sdb] 16119808 512-byte logical blocks: (8.25 GB/7.68
GiB)
sd 6:0:0:0: [sdb] Write Protect is
off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00
00
sd 6:0:0:0: [sdb] Assuming drive cache: write
through
usb-storage: device scan complete
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
tda10048_firmware_upload: waiting for firmware upload
(dvb-fe-tda10048-1.0.fw)...
saa7164 0000:03:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw
tda10048_firmware_upload: firmware read 24878 bytes.
tda10048_firmware_upload: firmware uploading
tda10048_firmware_upload: firmware uploaded
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
tda10048_firmware_upload: waiting for firmware upload
(dvb-fe-tda10048-1.0.fw)...
saa7164 0000:03:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw
tda10048_firmware_upload: firmware read 24878 bytes.
tda10048_firmware_upload: firmware uploading
tda10048_firmware_upload: firmware uploaded
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on
Facebook.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
