On 07/02/2017 09:37 PM, Sean Young wrote:
There is no dependency between the two, so remove the dependency in
Kconfig files.
Signed-off-by: Sean Young <s...@mess.org>
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
It might be nice to go through the 'depends on RC_CORE' Kconfig lines and
see if they can be changed to:
depends on INPUT
select RC_CORE
Regards,
Hans
---
arch/arm/configs/imx_v6_v7_defconfig | 2 +-
arch/arm/configs/omap2plus_defconfig | 2 +-
arch/arm/configs/sunxi_defconfig | 2 +-
arch/mips/configs/pistachio_defconfig | 4 ++--
drivers/media/Kconfig | 17 ++---------------
drivers/media/rc/Kconfig | 19 ++++++++++++++++---
6 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig
b/arch/arm/configs/imx_v6_v7_defconfig
index bb6fa56..2392824 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -222,7 +222,7 @@ CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y
diff --git a/arch/arm/configs/omap2plus_defconfig
b/arch/arm/configs/omap2plus_defconfig
index a120ae8..0414acf 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -304,7 +304,7 @@ CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_CORE=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_LIRC=m
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 5cd5dd70..6a0920c 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -96,7 +96,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_SUNXI=y
CONFIG_DRM=y
diff --git a/arch/mips/configs/pistachio_defconfig
b/arch/mips/configs/pistachio_defconfig
index 7d32fbb..f4c57d1 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -11,7 +11,7 @@ CONFIG_DEFAULT_HOSTNAME="localhost"
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=m
+CONFIG_IKCONFIGRC_CORE=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
@@ -207,7 +207,7 @@ CONFIG_IMGPDC_WDT=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_CORE=y
# CONFIG_RC_DECODERS is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_IMG=y
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 55d9c2b..421999b 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,6 +8,8 @@ config CEC_CORE
config CEC_NOTIFIER
bool
+source "drivers/media/rc/Kconfig"
+
menuconfig MEDIA_SUPPORT
tristate "Multimedia support"
depends on HAS_IOMEM
@@ -72,20 +74,6 @@ config MEDIA_SDR_SUPPORT
Say Y when you have a software defined radio device.
-config MEDIA_RC_SUPPORT
- bool "Remote Controller support"
- depends on INPUT
- ---help---
- Enable support for Remote Controllers on Linux. This is
- needed in order to support several video capture adapters,
- standalone IR receivers/transmitters, and RF receivers.
-
- Enable this option if you have a video capture board even
- if you don't need IR, as otherwise, you may not be able to
- compile the driver for your adapter.
-
- Say Y when you have a TV or an IR device.
-
config MEDIA_CEC_SUPPORT
bool "HDMI CEC support"
---help---
@@ -175,7 +163,6 @@ config TTPCI_EEPROM
source "drivers/media/dvb-core/Kconfig"
comment "Media drivers"
-source "drivers/media/rc/Kconfig"
#
# V4L platform/mem2mem drivers
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index c5338e3..bca77f0 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -1,9 +1,20 @@
-config RC_CORE
- tristate
- depends on MEDIA_RC_SUPPORT
+
+menuconfig RC_CORE
+ tristate "Remote Controller support"
depends on INPUT
default y
+ ---help---
+ Enable support for Remote Controllers on Linux. This is
+ needed in order to support several video capture adapters,
+ standalone IR receivers/transmitters, and RF receivers.
+
+ Enable this option if you have a video capture board even
+ if you don't need IR, as otherwise, you may not be able to
+ compile the driver for your adapter.
+ Say Y when you have a TV or an IR device.
+
+if RC_CORE
source "drivers/media/rc/keymaps/Kconfig"
menuconfig RC_DECODERS
@@ -459,3 +470,5 @@ config IR_SIR
be called sir-ir.
endif #RC_DEVICES
+
+endif #RC_CORE
