From: Daniel Scheller <d.schel...@gmx.net> When the demod driver puts the demod into sleep or shutdown state and it's status is then polled e.g. via "dvb-fe-tool -m", i2c errors are printed to the kernel log. If the last delsys was DVB-T/T2:
cxd2841er: i2c wr failed=-5 addr=6c reg=00 len=1 cxd2841er: i2c rd failed=-5 addr=6c reg=26 and if it was DVB-C: cxd2841er: i2c wr failed=-5 addr=6c reg=00 len=1 cxd2841er: i2c rd failed=-5 addr=6c reg=49 This happens when read_status unconditionally calls into the read_signal_strength() function which triggers the read_agc_gain_*() functions, where these registered are polled. This isn't a critical thing since when the demod is active again, no more such errors are logged, however this might make users suspecting defects. Fix this by requiring STATE_ACTIVE_* in priv->state. If it isn't in any active state, additionally set the strength scale to NOT_AVAILABLE. Signed-off-by: Daniel Scheller <d.schel...@gmx.net> --- V2/follow-up to https://patchwork.linuxtv.org/patch/42061/, changed as requested. Tested, working fine (ie. no "false" i2c failures). drivers/media/dvb-frontends/cxd2841er.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb-frontends/cxd2841er.c b/drivers/media/dvb-frontends/cxd2841er.c index 08f67d60a7d9..12bff778c97f 100644 --- a/drivers/media/dvb-frontends/cxd2841er.c +++ b/drivers/media/dvb-frontends/cxd2841er.c @@ -3279,7 +3279,10 @@ static int cxd2841er_get_frontend(struct dvb_frontend *fe, else if (priv->state == STATE_ACTIVE_TC) cxd2841er_read_status_tc(fe, &status); - cxd2841er_read_signal_strength(fe); + if (priv->state == STATE_ACTIVE_TC || priv->state == STATE_ACTIVE_S) + cxd2841er_read_signal_strength(fe); + else + p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; if (status & FE_HAS_LOCK) { cxd2841er_read_snr(fe); -- 2.13.0
