Em Wed, 21 Jun 2017 18:53:47 +0200 Daniel Scheller <d.scheller....@gmail.com> escreveu:
> From: Daniel Scheller <d.schel...@gmx.net> > > Side effect: KERN_DEBUG messages aren't written to the kernel log anymore. > This also improves the tda18212_ping reporting a bit so users know that if > pinging wasn't successful, bad things will happen. > > Since in module_init_ddbridge() there's no dev yet, pr_info is used > instead. > > Signed-off-by: Daniel Scheller <d.schel...@gmx.net> > --- > drivers/media/pci/ddbridge/ddbridge-core.c | 78 > ++++++++++++++++++------------ > 1 file changed, 46 insertions(+), 32 deletions(-) > > diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c > b/drivers/media/pci/ddbridge/ddbridge-core.c > index 9420479bee9a..540a121eadd6 100644 > --- a/drivers/media/pci/ddbridge/ddbridge-core.c > +++ b/drivers/media/pci/ddbridge/ddbridge-core.c > @@ -17,6 +17,8 @@ > * http://www.gnu.org/copyleft/gpl.html > */ > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > + I guess this is a left over from the old patch. When you use dev_foo, it will get the driver's name from dev->name. So, no need to do the above. Except for that, the patch looks fine on a quick glance. > #include <linux/module.h> > #include <linux/init.h> > #include <linux/interrupt.h> > @@ -124,10 +126,10 @@ static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, > u32 cmd) > ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND); > stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ); > if (stat == 0) { > - printk(KERN_ERR "I2C timeout\n"); > + dev_err(&dev->pdev->dev, "I2C timeout\n"); > { /* MSI debugging*/ > u32 istat = ddbreadl(INTERRUPT_STATUS); > - printk(KERN_ERR "IRS %08x\n", istat); > + dev_err(&dev->pdev->dev, "IRS %08x\n", istat); > ddbwritel(istat, INTERRUPT_ACK); > } > return -EIO; > @@ -533,7 +535,7 @@ static u32 ddb_input_avail(struct ddb_input *input) > off = (stat & 0x7ff) << 7; > > if (ctrl & 4) { > - printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl); > + dev_err(&dev->pdev->dev, "IA %d %d %08x\n", idx, off, ctrl); > ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr)); > return 0; > } > @@ -611,6 +613,7 @@ static int demod_attach_drxk(struct ddb_input *input) > struct i2c_adapter *i2c = &input->port->i2c->adap; > struct dvb_frontend *fe; > struct drxk_config config; > + struct device *dev = &input->port->dev->pdev->dev; > > memset(&config, 0, sizeof(config)); > config.microcode_name = "drxk_a3.mc"; > @@ -619,7 +622,7 @@ static int demod_attach_drxk(struct ddb_input *input) > > fe = input->fe = dvb_attach(drxk_attach, &config, i2c); > if (!input->fe) { > - printk(KERN_ERR "No DRXK found!\n"); > + dev_err(dev, "No DRXK found!\n"); > return -ENODEV; > } > fe->sec_priv = input; > @@ -632,12 +635,13 @@ static int tuner_attach_tda18271(struct ddb_input > *input) > { > struct i2c_adapter *i2c = &input->port->i2c->adap; > struct dvb_frontend *fe; > + struct device *dev = &input->port->dev->pdev->dev; > > if (input->fe->ops.i2c_gate_ctrl) > input->fe->ops.i2c_gate_ctrl(input->fe, 1); > fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60); > if (!fe) { > - printk(KERN_ERR "No TDA18271 found!\n"); > + dev_err(dev, "No TDA18271 found!\n"); > return -ENODEV; > } > if (input->fe->ops.i2c_gate_ctrl) > @@ -670,13 +674,14 @@ static struct stv0367_config ddb_stv0367_config[] = { > static int demod_attach_stv0367(struct ddb_input *input) > { > struct i2c_adapter *i2c = &input->port->i2c->adap; > + struct device *dev = &input->port->dev->pdev->dev; > > /* attach frontend */ > input->fe = dvb_attach(stv0367ddb_attach, > &ddb_stv0367_config[(input->nr & 1)], i2c); > > if (!input->fe) { > - printk(KERN_ERR "stv0367ddb_attach failed (not found?)\n"); > + dev_err(dev, "stv0367ddb_attach failed (not found?)\n"); > return -ENODEV; > } > > @@ -690,17 +695,19 @@ static int demod_attach_stv0367(struct ddb_input *input) > static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr) > { > struct i2c_adapter *adapter = &input->port->i2c->adap; > + struct device *dev = &input->port->dev->pdev->dev; > + > u8 tda_id[2]; > u8 subaddr = 0x00; > > - printk(KERN_DEBUG "stv0367-tda18212 tuner ping\n"); > + dev_dbg(dev, "stv0367-tda18212 tuner ping\n"); > if (input->fe->ops.i2c_gate_ctrl) > input->fe->ops.i2c_gate_ctrl(input->fe, 1); > > if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0) > - printk(KERN_DEBUG "tda18212 ping 1 fail\n"); > + dev_dbg(dev, "tda18212 ping 1 fail\n"); > if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0) > - printk(KERN_DEBUG "tda18212 ping 2 fail\n"); > + dev_warn(dev, "tda18212 ping failed, expect problems\n"); > > if (input->fe->ops.i2c_gate_ctrl) > input->fe->ops.i2c_gate_ctrl(input->fe, 0); > @@ -711,6 +718,7 @@ static int tuner_tda18212_ping(struct ddb_input *input, > unsigned short adr) > static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24) > { > struct i2c_adapter *i2c = &input->port->i2c->adap; > + struct device *dev = &input->port->dev->pdev->dev; > struct cxd2841er_config cfg; > > /* the cxd2841er driver expects 8bit/shifted I2C addresses */ > @@ -728,7 +736,7 @@ static int demod_attach_cxd28xx(struct ddb_input *input, > int par, int osc24) > input->fe = dvb_attach(cxd2841er_attach_t_c, &cfg, i2c); > > if (!input->fe) { > - printk(KERN_ERR "No Sony CXD28xx found!\n"); > + dev_err(dev, "No Sony CXD28xx found!\n"); > return -ENODEV; > } > > @@ -742,6 +750,7 @@ static int demod_attach_cxd28xx(struct ddb_input *input, > int par, int osc24) > static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype) > { > struct i2c_adapter *adapter = &input->port->i2c->adap; > + struct device *dev = &input->port->dev->pdev->dev; > struct i2c_client *client; > struct tda18212_config config = { > .fe = input->fe, > @@ -786,7 +795,7 @@ static int tuner_attach_tda18212(struct ddb_input *input, > u32 porttype) > > return 0; > err: > - printk(KERN_INFO "TDA18212 tuner not found. Device is not fully > operational.\n"); > + dev_warn(dev, "TDA18212 tuner not found. Device is not fully > operational.\n"); > return -ENODEV; > } > > @@ -847,19 +856,20 @@ static struct stv6110x_config stv6110b = { > static int demod_attach_stv0900(struct ddb_input *input, int type) > { > struct i2c_adapter *i2c = &input->port->i2c->adap; > + struct device *dev = &input->port->dev->pdev->dev; > struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; > > input->fe = dvb_attach(stv090x_attach, feconf, i2c, > (input->nr & 1) ? STV090x_DEMODULATOR_1 > : STV090x_DEMODULATOR_0); > if (!input->fe) { > - printk(KERN_ERR "No STV0900 found!\n"); > + dev_err(dev, "No STV0900 found!\n"); > return -ENODEV; > } > if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0, > 0, (input->nr & 1) ? > (0x09 - type) : (0x0b - type))) { > - printk(KERN_ERR "No LNBH24 found!\n"); > + dev_err(dev, "No LNBH24 found!\n"); > return -ENODEV; > } > return 0; > @@ -868,6 +878,7 @@ static int demod_attach_stv0900(struct ddb_input *input, > int type) > static int tuner_attach_stv6110(struct ddb_input *input, int type) > { > struct i2c_adapter *i2c = &input->port->i2c->adap; > + struct device *dev = &input->port->dev->pdev->dev; > struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; > struct stv6110x_config *tunerconf = (input->nr & 1) ? > &stv6110b : &stv6110a; > @@ -875,10 +886,10 @@ static int tuner_attach_stv6110(struct ddb_input > *input, int type) > > ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c); > if (!ctl) { > - printk(KERN_ERR "No STV6110X found!\n"); > + dev_err(dev, "No STV6110X found!\n"); > return -ENODEV; > } > - printk(KERN_INFO "attach tuner input %d adr %02x\n", > + dev_info(dev, "attach tuner input %d adr %02x\n", > input->nr, tunerconf->addr); > > feconf->tuner_init = ctl->tuner_init; > @@ -1009,13 +1020,14 @@ static int dvb_input_attach(struct ddb_input *input) > struct ddb_port *port = input->port; > struct dvb_adapter *adap = &input->adap; > struct dvb_demux *dvbdemux = &input->demux; > + struct device *dev = &input->port->dev->pdev->dev; > int sony_osc24 = 0, sony_tspar = 0; > > ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE, > &input->port->dev->pdev->dev, > adapter_nr); > if (ret < 0) { > - printk(KERN_ERR "ddbridge: Could not register adapter.Check if > you enabled enough adapters in dvb-core!\n"); > + dev_err(dev, "Could not register adapter. Check if you enabled > enough adapters in dvb-core!\n"); > return ret; > } > input->attached = 1; > @@ -1241,7 +1253,7 @@ static void input_tasklet(unsigned long data) > > if (input->port->class == DDB_PORT_TUNER) { > if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr))) > - printk(KERN_ERR "Overflow input %d\n", input->nr); > + dev_err(&dev->pdev->dev, "Overflow input %d\n", > input->nr); > while (input->cbuf != ((input->stat >> 11) & 0x1f) > || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) { > dvb_dmx_swfilter_packets(&input->demux, > @@ -1310,6 +1322,7 @@ static int ddb_ci_attach(struct ddb_port *port) > > static int ddb_port_attach(struct ddb_port *port) > { > + struct device *dev = &port->dev->pdev->dev; > int ret = 0; > > switch (port->class) { > @@ -1326,7 +1339,7 @@ static int ddb_port_attach(struct ddb_port *port) > break; > } > if (ret < 0) > - printk(KERN_ERR "port_attach on port %d failed\n", port->nr); > + dev_err(dev, "port_attach on port %d failed\n", port->nr); > return ret; > } > > @@ -1377,6 +1390,7 @@ static void ddb_ports_detach(struct ddb *dev) > static int init_xo2(struct ddb_port *port) > { > struct i2c_adapter *i2c = &port->i2c->adap; > + struct device *dev = &port->dev->pdev->dev; > u8 val, data[2]; > int res; > > @@ -1385,7 +1399,7 @@ static int init_xo2(struct ddb_port *port) > return res; > > if (data[0] != 0x01) { > - pr_info("Port %d: invalid XO2\n", port->nr); > + dev_info(dev, "Port %d: invalid XO2\n", port->nr); > return -1; > } > > @@ -1511,7 +1525,7 @@ static void ddb_port_probe(struct ddb_port *port) > port->class = DDB_PORT_CI; > ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); > } else if (port_has_xo2(port, &xo2_type, &xo2_id)) { > - printk(KERN_INFO "Port %d (TAB %d): XO2 type: %d, id: %d\n", > + dev_dbg(&dev->pdev->dev, "Port %d (TAB %d): XO2 type: %d, id: > %d\n", > port->nr, port->nr+1, xo2_type, xo2_id); > > ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); > @@ -1556,10 +1570,10 @@ static void ddb_port_probe(struct ddb_port *port) > } > break; > case DDB_XO2_TYPE_CI: > - printk(KERN_INFO "DuoFlex CI modules not supported\n"); > + dev_info(&dev->pdev->dev, "DuoFlex CI modules not > supported\n"); > break; > default: > - printk(KERN_INFO "Unknown XO2 DuoFlex module\n"); > + dev_info(&dev->pdev->dev, "Unknown XO2 DuoFlex > module\n"); > break; > } > } else if (port_has_cxd28xx(port, &cxd_id)) { > @@ -1611,7 +1625,7 @@ static void ddb_port_probe(struct ddb_port *port) > ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING); > } > > - printk(KERN_INFO "Port %d (TAB %d): %s\n", > + dev_info(&dev->pdev->dev, "Port %d (TAB %d): %s\n", > port->nr, port->nr+1, modname); > } > > @@ -1993,7 +2007,7 @@ static int ddb_probe(struct pci_dev *pdev, const struct > pci_device_id *id) > dev->pdev = pdev; > pci_set_drvdata(pdev, dev); > dev->info = (struct ddb_info *) id->driver_data; > - printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name); > + dev_info(&pdev->dev, "Detected %s\n", dev->info->name); > > dev->regs = ioremap(pci_resource_start(dev->pdev, 0), > pci_resource_len(dev->pdev, 0)); > @@ -2001,13 +2015,13 @@ static int ddb_probe(struct pci_dev *pdev, const > struct pci_device_id *id) > stat = -ENOMEM; > goto fail; > } > - printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4)); > + dev_info(&pdev->dev, "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4)); > > #ifdef CONFIG_PCI_MSI > if (pci_msi_enabled()) > stat = pci_enable_msi(dev->pdev); > if (stat) { > - printk(KERN_INFO ": MSI not available.\n"); > + dev_info(&pdev->dev, "MSI not available.\n"); > } else { > irq_flag = 0; > dev->msi = 1; > @@ -2040,7 +2054,7 @@ static int ddb_probe(struct pci_dev *pdev, const struct > pci_device_id *id) > goto fail1; > ddb_ports_init(dev); > if (ddb_buffers_alloc(dev) < 0) { > - printk(KERN_INFO ": Could not allocate buffer memory\n"); > + dev_err(&pdev->dev, "Could not allocate buffer memory\n"); > goto fail2; > } > if (ddb_ports_attach(dev) < 0) > @@ -2050,19 +2064,19 @@ static int ddb_probe(struct pci_dev *pdev, const > struct pci_device_id *id) > > fail3: > ddb_ports_detach(dev); > - printk(KERN_ERR "fail3\n"); > + dev_err(&pdev->dev, "fail3\n"); > ddb_ports_release(dev); > fail2: > - printk(KERN_ERR "fail2\n"); > + dev_err(&pdev->dev, "fail2\n"); > ddb_buffers_free(dev); > fail1: > - printk(KERN_ERR "fail1\n"); > + dev_err(&pdev->dev, "fail1\n"); > if (dev->msi) > pci_disable_msi(dev->pdev); > if (stat == 0) > free_irq(dev->pdev->irq, dev); > fail: > - printk(KERN_ERR "fail\n"); > + dev_err(&pdev->dev, "fail\n"); > ddb_unmap(dev); > pci_set_drvdata(pdev, NULL); > pci_disable_device(pdev); > @@ -2242,7 +2256,7 @@ static __init int module_init_ddbridge(void) > { > int ret; > > - printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) > 2010-11 Digital Devices GmbH\n"); > + pr_info("Digital Devices PCIE bridge driver, Copyright (C) 2010-11 > Digital Devices GmbH\n"); > > ret = ddb_class_create(); > if (ret < 0) Thanks, Mauro
