Hi Maxime, Thank you for the patch.
On Tuesday 07 Mar 2017 14:39:28 Maxime Ripard wrote: > The Makefile was a free for all without a clear order defined. Sort all the > options based on the Kconfig symbol. I've been annoyed in the past by not knowing where to put entries for new drivers. I think this is a good improvement. > Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > --- > drivers/media/platform/Makefile | 89 ++++++++++++------------------------- > 1 file changed, 31 insertions(+), 58 deletions(-) > > diff --git a/drivers/media/platform/Makefile > b/drivers/media/platform/Makefile index 349ddf6a69da..bd5dc3068cbc 100644 > --- a/drivers/media/platform/Makefile > +++ b/drivers/media/platform/Makefile > @@ -1,73 +1,46 @@ > # > # Makefile for the video capture/playback device drivers. > # > +ccflags-y += -I$(srctree)/drivers/media/i2c > > -obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o > - > -obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o > -obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ > -obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ > - > -obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ > -obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o > - > -obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o > - > -obj-$(CONFIG_VIDEO_VIVID) += vivid/ > -obj-$(CONFIG_VIDEO_VIM2M) += vim2m.o > - > -obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe/ > - > -obj-$(CONFIG_VIDEO_TI_CAL) += ti-vpe/ > - > -obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o > +obj-y += omap/ > +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ > +obj-$(CONFIG_BLACKFIN) += blackfin/ > +obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/ > +obj-$(CONFIG_SOC_CAMERA) += soc_camera/ > +obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/ > +obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/ > +obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ > obj-$(CONFIG_VIDEO_CODA) += coda/ > - > -obj-$(CONFIG_VIDEO_SH_VEU) += sh_veu.o > - > +obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o > +obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/ > +obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/ > +obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/ > obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o > - > +obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ > +obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o > +obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ > +obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o > +obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/ > +obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o > +obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o > +obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o > +obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/ > obj-$(CONFIG_VIDEO_S3C_CAMIF) += s3c-camif/ > obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) += exynos4-is/ > obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ > obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ > - > obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ > obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/ > - > +obj-$(CONFIG_VIDEO_SH_VEU) += sh_veu.o > +obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o > obj-$(CONFIG_VIDEO_STI_BDISP) += sti/bdisp/ > -obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/ > -obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/ > - > obj-$(CONFIG_VIDEO_STI_DELTA) += sti/delta/ > - > -obj-$(CONFIG_BLACKFIN) += blackfin/ > - > -obj-$(CONFIG_ARCH_DAVINCI) += davinci/ > - > -obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o > - > -obj-$(CONFIG_SOC_CAMERA) += soc_camera/ > - > -obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o > -obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o > -obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o > -obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/ > - > -obj-y += omap/ > - > -obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/ > - > +obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/ > +obj-$(CONFIG_VIDEO_TI_CAL) += ti-vpe/ > +obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe/ > +obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o > +obj-$(CONFIG_VIDEO_VIM2M) += vim2m.o > +obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o > +obj-$(CONFIG_VIDEO_VIVID) += vivid/ > obj-$(CONFIG_VIDEO_XILINX) += xilinx/ > - > -obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/ > - > -obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/ > - > -ccflags-y += -I$(srctree)/drivers/media/i2c > - > -obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/ > - > -obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/ > - > -obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/ -- Regards, Laurent Pinchart
